!V70  x   >   !Catalina Santara Travel Trailer  x   >   SeeLeveL  x   >  

See level monitor kit. I have a cedar creek with fresh, galley, bath, and black tanks. Do they make a kit for monitoring 4 tanks, that are labeled on the monitor correctly for this? Thanks | We do have the SeeLeveL RV Holding Tank Monitor...

Hey, does this show the percentage always, or does the screen go black when you arent using it? Constantly trying to reduce lights in the van, so Id prefer it wasnt always lit | The SeeLeveL RV Holding Tank Monitor # SE94VR shuts off after just...

The pump switch is just another place to turn on/off the water pump. Or is there another reason for it? | It is a 3-way switch. The SeeLeveL RV Holding Tank Monitoring System, # SE39VR includes a panel that incorporates readings for sensors...

The pump switch is just another place to turn on/off the water pump. Or is there another reason for it? | Correct, the pump switch of the SeeLeveL RV Holding Tank Monitoring System # SE39VR provides an additional way to activate the water pump. |

I am looking to put in the replacement holding tank sensor system. I have a a 2022 Alliance RV Paradigm 5th wheel 35 ft. Which sensor system should I get? | This really depends on if your 2022 Alliance Paradigm has an RV-C, multiplex wiring...

Will the SE74VR replace an older monitor that is in a 1998 Winnebago RV? The monitor that is in it is showing inconsistant and wrong levels. Thanks for you help. | Yes, the SeeLeveL RV Holding Tank Monitor for fresh, gray, black - water pump...

Looking for a meter to tell how much water we have consumed in our RV. We are dry camping and need to conserve the water in our fresh tank. The sensors in the RV are simply 3 lights. I would love to have something that shows gallons consumed,...

What is the output voltage on the sensors? | The SeeLevel Sensor part # SE27VR that you referenced runs on 12 volts. |

Can SeeLevel sensor be used th Simarine Pico tank monitor | Mike, unfortunately not. The SeeLeveL Sensor for RV Holding Tank Monitor # SE78VR is designed to be used with the SeeLeveL RV Holding Tank Monitor # SE34VR, so it's not going to work...

I have a 98 class A Georgie Boy Cruise Master on a Freightliner chassis with holding tanks that have wired sensors into the tanks all displaying on the range hood. Does anyone make a replacement sensor that is non-immersive and will wire into...

Can SeeLevel sensors be used on external mounted tanks that exposed to water and all road dirt? | Yes, the Seelevel sensors like the part # SE78VR can be used on external mounted tanks exposed to water and roads like you asked about. |

Im looking at the Seelevel sensor mounting on my water tank. Is this suitable for a tank mounted underneath the van? Thanks. SeeLeveL SE27VR | Yes, the SeeLeveL Sensors # SE27VR can be used on a tank mounted under a van. You'll just want to...

RE: SeaLevel Systems The various units describe the monitor strip for holding tanks, but dont say how the Propane tanks are monitored. Where does the monitor panel get propane level info? My trailer does not currently measure propane levels....

Do you carry the SeeLevel 709-N2K-NLP? This is the display that has the NMEA2000 interface. Thank you, | That part number corresponds with a SeeLevel system that has sensors for a fresh, gray, and black water tank like the part # SE39VR but...

Does etrailer install the SeeLevel products? I have a 2017 Renegade Valencia 35MB. | Yes we do carry the SeeLevel brand of tank sensors and monitors. If you check out the link I attached to this page you'll see all of the options we offer. |

Looking for 2ea potable water tanks. 60 length x 36 across x 6 depth. With sensors installed. 03 25 Tahoe Toy hauler by Thor | The closest match we have for what you're looking for is the Valterra RV Water Tank part # R8060 which measures 60"...

The sea level sensor would it work with a standard monitor that has readouts by the 1/3 or do I need to add or replace my present monitor? Thank you | The SeeLevel systems will require you to replace your current monitor in order to properly...

Do you carry the 701AR and 701ES2 sensors | We have the 710-AR and 710-ES2 SeeLevel sensors, though I was unable to find any 701AR or 701ES2. If you were referring to the 710-AR and 710-ES2 you would need the following: - 710-AR: SeeLeveL Sensor...

Replacement tank sensors : Do you know of an external holding tank sensor that is compatible with the Lippert inCommand display panel? I am hoping to cut the wires to the internal sensor and jump the replacement external sensor to the existing...

i have a 43 Defever trawler boat. i have 2 150 gal freshwater tanks, about 36 inch tall. can you stack sensors more than 2 high? will the sensors work on steel diesel tanks? | The SeeLeveL sensors can be stacked 2 high at the most, like what...

I am trying to connect this and have no wiring diagram. I have created my own of what I did, and it’s not working. Do you have a wiring diagram for this? I bought it from etrailer a couple of years ago and have never been able to get it to work....

I have a tank that is a 12 inch piece of transparent, schedule 40 PVC pipe, with caps on both ends, etc. I am looking for a way to measure the level of this tank so that I can open a valved on the bottom to let it drain. The content of the tent...

Can the Seelevel Model 709-4 sound an audible alert when a tank is full? | The SeeLeveL RV Holding Tank Monitor part # SE84VR does not have any sort of built-in speakers so it will only display visual alerts. Therefore, you'll need to press...

There is no direct discussion for hooking your system to an electrical power source. Am I to assume that two wires must be run ro one of my chassis batteries? | The SeeLeveL RV Holding Tank Monitoring System, # SE39VR operates from a 12 VDC...