Replacement Gen-Y Gooseneck Pin Box for Lippert Turning Point
I own a Grand Design 295RL fifth wheel with a Turning Point pin box. I would like to replace the Turning Point with either the Reese Goosebox or the Gen-Y executive. I can find no signage on either the wings or the pin box to indicate fitment...
Recommendation for Carrying Bikes Between Truck and Trailer
Im trying to find a way to mount our bikes and rack on the front of our trailer. We have a Thule T2 rack and two mountain bikes. Which weight about 112 pounds In total. I currently put them in the bed but I want to free up some bed space and...
Will Gen-Y Installation Bolt Kit Work With Reese Goosebox
Will this work for a Reese 20K Goosebox? | Yes, for the Reese Goosebox you can use the Installation Bolt Kit for Gen-Y Hitch 5th Wheel Pin Boxes and 5th Wheel to Gooseneck Adapters # GY86FR. |
Recommended Gooseneck Pin Box for a Lippert 1116 Pin Box
5th wheel is 16,800 GVWR. Which Gooseneck pin box fits Lippert 1116 pin box | To replace a Lippert 1116 pin box you will need the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY43FR. The Gen-Y does not come with chains....
Cushioned Weight Distribution 2.5 inch Shank Solution for Ram 2500
I had asked the question earlier but have a problem... Ive got a new Ram 2500 2022 and the height of the old 1500 was perfect for my E2 hitch. Now, Im going to have a . Will one of these work? And Ive only got about 800 lbs of tongue weight...
Is A Gooseneck Conversion Worth It?
So I have a fifth wheel camper with a Demco 18K autoslider in my F350 Superduty. Is there an advantage to using changing camper to a gooseneck? the truck has it already to use? Also, the auto slide clears back tailgate. thanks | I think...
High Low Adapter Solution for Carrying Winch Plate at Higher Location
I want to put a hitch-mounted winch on the front of my Tundra. Winch is for helping get out of mud or snow if the truck gets stuck. My front mounted hitch is too low to the ground for a winch so this would help elevate the front hitch receptacle...
Is There A Cushioned Gen-Y Ball Mount Compatible With A Weight Distribution System?
Is there a cushioned ball mount that can be used with weight distribution? I dont see how it would work with this product.... Any suggestions would be very much appreciated! | For the Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches #...
Longest Drop Adjustable Ball Mount for a 2 Inch Receiver
Iām installing a receiver on my Kenworth. The bottom of the receiver will be 30 inches from the ground. If I get a GenY 15ā hitch and still need more maybe 3ā more, can I use another hitch? | Our longest drop hitch for a 2" receiver is going...
Recommended Gen Y Gooseneck Pin Box Replacement for a 1716 Pin Box
Hi, looking to swap out my 5th wheel king pin with the gen y. But need guidance on which one will work. Attached is a photo of the current king pin. | Thanks for the picture! I just spoke with my rep at Lippert. Your toy hauler has a 1716...
Ball Mount Compatible With An Older Putnam Hitch That Uses A 3/4 Inch Hitch Pin
I have aa older Putnam hitch that I need to get a new ball mount, preferably adjustable. the problem I have is the hitch pin is 3/4, not the normal 5/8 I see. does anybody make these? Or do you any solution for this? Thank you | I took a look...
Weight Rating of the Gen-Y Iron Grip Anti-Rattle Hitch Pin for 3" Hitch Receivers
Does the Gen-Y Iron Grip Anti-Rattle Hitch Pin for 3inch Hitch Receivers - 5/8inch Diameter have a weight rating? | I just checked with Gen-Y. The Gen-Y Iron Grip Anti-Rattle Hitch Pin for 3" Hitch Receivers - 5/8" Diameter item # GY49FR is...
Steel Hitch Pin for 2-1/2 Inch Receiver and Steel Hitch Reducer
I am looking for Stainless hitch pins for a 2 1/2 inch hitch. I can find the locking stainless for class 5 hitch. I just want a regular stainless hitch pin for a class 5 2-1/2 inch hitch And a stainless reducer for 2-1/2 inch to 2-inch hitch...
Weight Distribution Shank Replacement that is Cushioned
I have a leveling/sway tow hitch mounted on my 2018 ram 1500 hemi. is there anyway to get these features with this type of hitch. some of the Georgia roads are concrete and very bumpy. try to smooth out the ride. the concept sounds great....
Why Cant Curt Rebellion XD Shock Absorbing Adjustable Ball Mount be Used in Rise Position
can these be turned over so that there is taller rise than just the 1/4inch it states in the description? | The Curt Rebellion XD Shock-Absorbing Adjustable Ball Mount # C45949 can't be used in the traditional rise position due to how the shock...
Recommended Trailer Deck Height for Gen-Y 325-GH-R84 84 Aluminum Car Ramp
I see the 72 in. ramp lists up to 20 inches. My trailer has a 24 in. rise, is this 84 in. ramp adequate? | According to Gen-Y, their # 325-GH-R84 84 inch aluminum loading ramp would be perfect for your 24 inch deck height. I've linked to a product...
Replacement Pin Box For Gooseneck Connection On a Dutchmen Voltage 4225 Toy Hauler
I have a 2021 Voltage 4225 Toy Hauler. Is the GY66FR the right adapter to use? | Yes, the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY66FR is the correct weight capacity and bolt pattern for your 2021 Dutchmen Voltage 4225...
Gen-Y Torsion 2-Ball Mount VS Curt Rebellion XD For Towing 4,000LB Boat Trailer
I am towing a boat and the total weight with trailer is about 4000 pounds. Which hitch would you recommend between the Gen Y Torsion and Curt Rebellion? Would there be enough tongue weight about 400 pounds for gen y torsion to function properly?...
Replacement 2-1/2 to 2 Adapter Sleeve for TorkLift SuperHitch Magnum Trailer Hitches
I just bought a 2022 Dodge Ram 2500. It has a 2.5inch receiver opening and all I have is expensive 2inch receivers. will this product work for me? I tow a 20inch utility trailer with two UTVs at about 5000lbs. Replacement 2-1/2inch to 2inch...
Shank With Drop for Blue Ox Weight Distribution System
I own a Chevrolet Silverado 2500 HD and a Jayco Jayflight 29RKS 6750 lbs towing, 815 lbs tongue. I have the Blue Ox hitch and sway system. What down hitch will work? | I believe you are asking about a shank with drop for your Blue Ox weight...
Can the Gen-Y 10 Adjustable 2-Ball Mount Be Used for Towing and a Hitch Carrier
Can this hitch mount be used for a motorcycle hitch carrier? My bike weighs 360lbs. I use an 8 inch when towing a trailer which is perfect.My vehicle is a 2017 Nissan Armada. I am worried that this hitch may not carry the weight of a bike...
Can Gen-Y Stacked Receiver Ball Mount 325-GH-1225 Be Used in the Rise Position
Can the 325 - GH - 1225 be used in the rise position? What increments in inches of rise or between each section? | The Gen-Y torsion 2 ball mount, part # 325-GH-1225 can indeed be used in the rise position. Each rise position is about 2-1/2...
What Diameter Hitch Pin Does Gen-Y Glyder Ball Mount # 325-GH-12001 Use
Where on your site can I find the correct hitch pin diameter for the Gen-Y Glyder with 2inch ? is it 5/8th or 1/2? | The Gen-Y Glyder for 2 inch hitches part # 325-GH-12001 that you referenced is designed to be used with a 5/8 inch hitch pin...
Gooseneck Pin Box to Replace Lippert 1116
Looking for a gooseneck to replace my 5th wheel on my camper. LCI 2021018922. | According to Lippert, you have a 19k 1116 pin box on your 5th wheel. For a Gen-Y replacement you need the # GY43FR. This matches your 1116 bolt pattern and has a...
Filter Your Search
Contact and Help