!Stampede Travel Trailer  x   >   !Northwest Trail  x   >   !350Z  x   >   1989  x   >  

6300-4440. Will this fit the following vehicle or can you tell me which goose neckhitch does? Is there a weld-on version? This truck has a 3rd party flat bed. 1989 Chevrolet Cheyenne 3rd gen V3500 dually, cab and chassis model, 7.4 liter 4...

Looking for the right kit to fit my 1989 GMC 3500 thats lowered 6inch in the rear. Its 2wd and also has a c notch in the rear. Looking for something ASAP. THXS | Air Lift makes a SlamAir kit, part # AL59202 that is specifically designed for...

trying to connect to cold side of brake switch, but only found hot and the other wire is also hot until brake is depress, then it is cold. Where can I find the cold wire? | It is possible that the wire you need on the brake switch is a white...

I was given a 40 inch led light bar for the holidays but I have an 89 Jeep WranglerYJ. Is it possible to mount this to my jeep ? Ive been seeing that the 50 inch is compatible for the yj | For a light bar confirmed to fit your 1989 Jeep Wrangler...

How do I know that my Ford Van Aerostar 1989 is extended or standard ? | It actually does not matter if your 1989 Ford Aerostar is extended or standard because Curt trailer hitch # C13032 actually fits both styles. I have linked the installation...

Hi, Thule 9539 foot pack for the square bars...Will they fit a 1998 grand marquis? -Thanks | The only roof rack we offer for the 1998 Mercury Grand Marquis is one that attaches to naked roofs with vacuum cups. The cups hold 210 lbs each so...

my 4 tab to 7 blade wireing adapter did not come withany directions can you e-mail me a set | To wire the 4-Way round to 7-Way blade wiring adapter, item # 37185, on your 1989 GMC CK series pickup you will need to plug the existing 4-Way connector...

Installed a 4-way on my trailor that I tow with a 1989 Toyota pickup. The right and left signals, tail lights, and flashers all work. No brake lights however. Checked all connections. Any suggestions? | It sounds as if you may have wired...

Can I use the video out cable on the receiver to hook this system up to a larger video display? Will a larger monitor still provide a sharp image? I want to use the system in the truck for hooking up trailers as well as for a backup camera in...

I have a spindle diameter of 1.87 inches and a seal OD of ~2.5 inches. Everything seems to lead me to the 10-40 seal but that one has an ID of 1.938. Will this work on my spindle? It is a MHU axle. Thanks! | The difference between the ID...

I am looking for a hitch for my motorhome. It is a 1989 Ford E350 Chassis. The motorhome is a Coachman Leprechaun 27. Already has a hitch but only 3500 lb. rated and no WD hitch allowed. Looking for something rated 600/6,000 area. Hopefully...

Hello. I need a trailer Electric break control and plug connector for a jeep cherokee 1989. Please quote me for those parts. Shipping is for Puerto Rico 00736. Thanks | For your 1989 Jeep Cherokee, I recommend the Tekonsha Prodigy P3 Brake Controller...

Can you set this up to work individual by adding a separate motor? This is the second time I have used the new landing gear and im having a hard time hitching and unhitching due to one jack is not traveling the same as the other. I did not have...

this truck does not have any trailer brake controller or 7 way wiring- had some sort of hydraulic brake attachments- with hoses to the bed I need kit s to install 7 way in bed for goose neck trailer, and trailer brake controller. I...

Im getting a 5th wheel hitch with curt 16104 rails, what installation kit would I need for an 89 ford f150 8ft bed. Thanks | We have the Curt Universal Fifth Wheel Base Rails with Installation Kit # C16200 as there are no custom brackets available...

I am buying this rear bumper for a 1989 Jeep Comanche. In addition to the bumper, do I need to buy any additional parts, installation kit to be able to install on the truck. The current rear bumper on the truck is the original and there have...

can this electric fan be hooked up a the 1989 pickup that does not have a electric fan already? | Yes you can install the Flex a Lite fan # FLX236 on a 1989 Toyota Pickup but you'll also need a wiring kit/thermostat part # FLX31149 and you'd...

I bought the set up for my 1989 YJ, but my existing wiring is a 3pole, the new harness is a 4 pole with one blanked out, how do I install. Thanks for any help | If you bought wiring harness # 118356 then that would be the problem. This harness...

What size [diameter] bolts does this part take? | I went out to the warehouse to measure the square holes in the Trailer D-Ring Tie Down, # LRB1. According to my measurements it will accept bolts no larger than 7/16 inches in diameter. A 3/8...

Will these upper doors fit onto a half steel door and match up with a hard top? I need rounded upper edges for my upper doors, but am having a tough time finding upper door frames with rounded edge to match up with the holes to slide into my...

Any reason this wouldnt work for smaller 12 and 13inch wheels? Its say 14 and 15 in description. | The Erickson spare wheel mount part # EM77316 that you referenced was not designed to be used on wheels smaller than 14 inches in diameter. The...

I am interested in the Demco, because it seems to be a subtle, permanent base plate. First of all how do I determine which tow bars will work with it? Also, it looks like some of the other brands may require that I cut the platic of my front...

I am looking for a base plate to fit my ‘89 Suzuki Sidekick that will work with my Roadmaster Blackhawk tow bar. Can you help? | For your 1989 Suzuki Sidekick we have the Roadmaster Crossbar Base Plate kit part # 118-3 which will work great...

18 Ram 3500 Factory 20 wheels, What would be an adequate drop on an adjustable ball mount ? | For your 2018 Ram 3500 with a 2-1/2 inch hitch the B and W adjustable ball mount that would be the best option would be the part # BWTS20040B which...