Will The Lock N Roll Articulating Coupler # 336TS504 Fit a 2021 Forest River No Boundaries 10.6?
Hello, will the 336ts504 fit a 2021 Forest River No Boundaries 10.6? | Yes, the Lock N Roll Articulating Coupler # 336TS504 will fit as a replacement for the standard coupler on your 2021 Forest River No Boundaries 10.6. You will of course also...
Will Lock N Roll Articulating Coupler Fit 2020 Sunset Park Traveler
Hello i have a 2020 sunset park traveler model #MICRO 109. I want to know if the following item will fit this. Lock N Roll Articulating Coupler - A-Frame - Trailer Side - 11K Item # 336TS504. thank you. | From what I can tell based on the photos...
Axle and Other Towing Part Recommendations for Small Overlanding Trailer
I was just wondering if you might be able to point me in the right direction for what I would need for my overland/gear transport trailer that Im building as far as axel size and rims. The trailer is going to be a 4x8 trailer that must accommodate...
Does The Lock N Roll Trailer Hitch and Coupler Affect Backing Up The Trailer?
is the Lock N Roll Hitch and coupler system squirrely to back up a 16foot cargo trailer in snow with the articulation feature? | The Lock N Roll Articulating Coupler # 336TS504 along with the Lock N Roll Articulating Hitch # 336VS503505 is no...
Can A Hitch Extender Be Used With A Lock N Roll Articulating Hitch
Can i use 18 your trailer hitch with a rock and roll hitch? The trailer gross weight is about 2300 lbs | Yes, you could use the Trailer Hitch Extender for 2" Hitch Receivers # e48YR with a Lock N Roll Articulating Hitch like part # 336VS503505,...
Installation of Lock N Roll Coupler on Travel Trailer
What If have standard ball mount for travel trailer but want to convert to an articulated hitch system? Any option short of cutting and welding? Thanks | Since you have a travel trailer I'm assuming you have an A-frame coupler on it. If that...
Trailer Side Couplers Compatible With Lock N Roll Articulating Hitch Vehicle Side
What trailer side couplers are compatible with this part? | I'll go ahead and give you the list of all the trailer side couplers that are compatible with the Lock N Roll Articulating Hitch w/ 3-Position Channel - 1-1/4" Receivers - Vehicle Side...
A-Frame Coupler Recommendation for Off Road Trailer
I have a 1992 Fleetwood Wilderness travel trailer that has the typical A-Frame trailer coupler on front that accepts a 2 5/16inch ball....I would like to upgrade to a heavier duty coupler- my travel trailer has an upgraded suspension system...
Replacement Trailer Tongue Coupler For Detail K2 Utility Trailer
I hate the type of coupler that comes stock with the DK2 Mighty Multi Utility trailer. How wide is the coulpler that now comes standard in this kit? | The coupler on the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7 is for a 2"...
Does Lock N Roll Articulating Trailer Hitch Setup Allow More Sway
Hi, Does the use of a Lock n Roll articulating hitch exacerbate sway? Thanks. | The use of Lock N Roll Articulating Trailer Hitch for 2" Receivers # 336VS501 does not add sway to the setup. Couplers normally can articulate to the left and right...
Recommended Bolt Size To Install Lock N Roll 2-1/2" Articulating Trailer Coupler 336TS506
Does the lock n roll 2 1/2” trailer side come with a bolt kit. If not can it be purchased separately? | The Lock N Roll Articulating Channel Tongue Trailer Coupler - 2-1/2" Channel - Trailer Side # 336TS506 you were looking at does not include...
Lock N Roll Articulating Coupler Bolt Torque Specs
What are the torque settings on this coupler when moving it vertically up and down? Thanks | The Lock N Roll Articulating Coupler # 336TS502 will come with two 5/8" grade 5 coarse thread mounting bolts and lock nuts. These bolts have a recommended...
Recommended Lock N Roll Ball Mount For 2019 Yukon XL SLT That Needs 3-1/4 - 3-1/2 Rise/Drop
I have a 2019 Yukon XL SLT with the Maxtowing package that has rear auto-leveling shocks. It needs approximately 3.25 ball hitch setup to get my trailer level when I tow. Does any of the adjustable Lock N Roll hitch setups offer a 3.25 inch...
Can Lock N Roll A-Frame Coupler be Installed on High Altitude Trailer
Can I replace the ball hitch on a High Altitude XT50 trailer with this unit? | You can absolutely replace the standard ball coupler on your High Altitude trailer with the Lock N Roll coupler you asked about, which is the following part: - Lock...
Parts Needed To Use Lock N Roll Articulating Hitch With Curt Channel Style Adjustable Ball Mount
I currently have a Curt C45900 channel style adjustable ball mount. Will the Lock N Roll model 336VS503 coupler work with my Curt channel? My gut feeling is yes, but I’d like a confirmation. | In order to use the Lock N Roll Articulating Hitch...
Can The Lock N Roll Trailer Hitches Be Mounted On The Trailer Side?
Can the rock and roll hitch be on the trailer side and the mount be on the vehicle side. | The Lock N Roll Articulating Hitches # 336VS503505, # 336VS501 and # 336VS503 are only designed to mounted on the vehicle side. The same goes for the...
Lock N Roll Hitch Assembly for 5 Inch Drop
I have a Toyota 4Runner with a 22” high hitch receiver, and am looking at buying a trailer with a 17” High hitch. What lock n roll hitch parts do I need to buy? Can you please send me a list of part numbers I would need to purchase? I assume...
Can a Swivel Type Pintle Hook Be Used with 2 Hitch
Do you have an adjustable height mounting bracket this swivel pintle hook would attach to that includes a 2inch draw bar for use with a Class III hitch? Im looking at buying a military surplus trailer that has a pintle ring type hitch and...
How To Choose Correct Lock N Roll Articulating Trailer Hitch
I am trying to figure out what /rise Lock N Roll hitch I need. I have a 2019 Tacoma stock wheels and measure the hitch height at 17.5. The trailer we are getting has a hitch height of 21 3.5 difference. I see there is on eTrailer, there is are...
Installing Lock N Roll Articulating Channel Tongue Trailer Coupler on Tear Trailer
I have a tear trailer already set up with the receiver for a 2” ball hitch. Given this setup, for the Lock n Roll, how would one attach the coupler to the trailer? Would you need to remove the receiver and weld on the lock n roll coupler? |...
How Does Lock N Roll Articulating Hitch Ride on Highway
How does in tow down the interstate? Can you use a weight distribution hitch on highway! | Hey William, the Lock N Roll Articulating Hitch part # 336VS517 is going to tow really well. On the highway it would basically feel just like a standard...
Rise And Drop Measurements of Lock N Roll 3-Position Channel Hitch
Why do your specs show a rise or of 4 1/4 while Lock n Roll website shows a maximum rise/ of 5 1/2? The parts appear to be one and the same 4 hole 3 positions. Im wondering if you are measuring differently than Lock N Roll? I need a 5 1/2...
Does the Lock N Roll Articulating Channel Tongue Trailer Coupler 336TS508 Fit a 3 Inch Tube
Just to be clear, does the 336TS508 fit over 3 inch HSS tube? | Yes, the Lock N Roll Articulating Channel Tongue Trailer Coupler - 3" Channel - Trailer Side # 336TS508 will fit. The channel width is 3" so it is designed to accommodate a 3" trailer...
Recommended Lock N Roll for Military M101a Trailer
Need guidance on swapping out a pintle hitch set-up on a military utility trailer M101a to a LockNRoll system. The trailer will be for overland camping use and pulled by a Jeep Wrangler or Truck. I can upload pics of the current pintle hitch...
Filter Your Search
Contact and Help