!Stampede Travel Trailer  x   >   Range Rover Sport  x   >   !Octane TT Toy Hauler  x   >   2011  x   >  

Does this fit a 2011 range rover sport hse and not which one? | The Hopkins wiring harness you looked at, part # HM43534, actually fits some Nissan vehicles that have the factory tow package. If your 2011 Land Rover Range Rover Sport didn't...

We need to tow a camp trailer with our 2011 Ranger Rover sport, What do you recommend for the trailer wiring with brake controller? Thanks in advance. | We have just what you need! If your 2011 Range Rover Sport has the factory tow package...

does this rack have to be put into roof rack rails or can it be put straight into the roof gutters into a factory drilled hole? | The Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT is designed to mount on tracks that sit on the roof like...

hi there I have a 2011 Range Rover Sport and I got told that you sell a adaptor for when a Range Rover connects to a trailer using LED lights it stops it from flashing the LED lights. IS this correct and if so what is the part number of it....

I have a PIONEER SX PLATFORM 60inch X 54 44101B installed on my 2011 Range Rover. I am looking for the wind fairing that fits that. They do not have them on Rhino Rack any more. I would like to find the one that fits and what measurements...

Hello, I am looking to purchase a weight distribution hitch with sway control for my 2011 range rover sport supercharged. My owners manuals states to not use weight distribution hitches. Reading further, it seems the issue is related to the...

I have a 2011 Range Rover with both 4-way and 7-way trailer wiring connectors. My trailer has LED lights and the rover does not consistently sense the trailer - trailer assist doesnt begin install routine. Will this adapter add sufficient...

Hello, so I bought the 4-pole wiring harness # C59236 for my Range Rover as my utility trailer does not have electric brakes that require power. I detached the driver side tail lamp and saw theres a 6 pin connector as you can see from the...

What is the correct part number for this application? | The Tow-Ready trailer connector adapter # 20142 you referenced is designed to work on a range of European import vehicles. This adapter will prevent low current draw on your LED trailer...

I have a 2011 range rover landrover sport with no existing roof rack rails. Id like to be able to carry a kayak, weighs 50 pounds, on top of the SUV. Id also like to carry up to 2 bikes on the roof as well. What is my best option, best value...

I have read the responses regarding the Range Rover application and will like to know if a copy of the actual installation document can be email. I will like to completely understand the installation before the purchase as much as possible. 2011...

Hi, I am just wondering if you have a trailer hitch for Range Rover HSE Lux 2011. Thank you very much | There is a trailer hitch that fits a 2011 Land Rover Range Rover Sport HSE model, the Curt Trailer Hitch Receiver # 13456. I verified...

Last year, May 2020 I purchased Curt Multi-Ball Adjustable Ball Mount to 2inch Trailer Hitches. Recently the 3 ball section was stolen off of my truck. May I purchase the replacement ball section only? | I am sorry to hear that the tri ball...

Looking for tire chains for 2011 Range Rover Sport. Tire size 255/50 R19. Will these comply with Land Rovers requirements? Handbook says use only single sided Spike-spyder traction devices. Thanks, | We have a very similar set of chains...

I believe the model above is the same as the HSE. I believe the Luxurymodel simply has more options installed than the HSE. Is this correct and then if true, your Class III hitch, the Part # 13456, will fit my 2011 Land Rover Sport Luxury...

I have a 2011 Range Rover. The factory mounted hitch receiver sits well under the rear bumper, about 10inch to the outermost edge of the bumper from the center of the hitch pin hole. Do you have a carrier that will fit without hitting the...

Do you carry a tow hitch compatible with 2011 Range Rover HSE? | Yes, we have the Curt hitch part # 13456 which fits the 2011 Range Rover Sport HSE that you have! I attached an install video for this for you to check out as well. |

Will part #13456 Curt Receiver hitch fit on a 2011 RR sport super charged edition with a 19inch spare? | I contacted my tech contact at Curt and unfortunately the Curt Hitch for a 2011 Land Rover Range Rover Sport # 13456 will not work on your...

Hi, I am looking for a 7 pin wiring kit for my 2011 Range Rover HSE Sport. The vehicle already has the factory tow hitch as an fyi, along with the mounting holes for the socket. I wasn’t sure which kit to get. Thanks in advance Mark | Hey...

I need to get a 2inch hitch for this vehicle. Is this something you sell? | Yes, we do offer the Curt hitch part # 13456 as a fit for your 2011 Land Rover Range Rover Sport HSE model. This is a 2 inch hitch like you are wanting that has a...