Availability of 30 inch Trailer Leaf Spring
Looking for 30 1/4 inch mono leaf springs for 2018 Keystone Bullet Premier travel trailer 29RKPR… | I wish we could help but we don't have any 30-1/4 inch mono leaf springs. We have a 30 inch 6 leaf spring part # UG34FR which is for a 5,000...
Recommended Hanger Spacing for 24-7/8 Inch Long Leaf Spring with APT4 or APT3HD Hanger Kit
What is the recommended distance between hangers for the APT4 and APT3HD hanger kits using 24 7/8inch long springs? | Based on my research, when using the Universal Group Leaf Springs # SP-222275 that has a spring eye length of 24-7/8 inches...
Replacement LM11949 Bearings and Leaf Springs For Older Boat Trailer
I have an old boat trailer that Id like to restore. Looking for hubs and leaf springs. Hubs are 5 on 4 1/2 pattern with a 3/4 inch axle. Outer Bearing reads LM11949. Leaf Springs are 3 leaf slipper spring and measure 24 1/4inch long and 1 3/4inch...
Replacement Trailer Slipper Spring for a WaveRunner Trailer
i have a waverunner trailer that needs new slipper leaf springs. From the bolt to where the slipper passes thru center to center is 24, i measured the actual spings i have now on there and the overall length is 27inch long but i am sure they...
Distance Between Slipper Spring Hangers When Used with Slipper Spring # SP-177275
With the slipper spring SP-177275 and bolt on hangers, what is the recommended distance between hangers? Thanks, | The distance from the center of the bolt hole on front hanger to the rear hanger for the slipper spring # SP-177275 would need...
What Would Cause Boat Trailer Leaf Spring to Flatten Out
could it be possible that a trailer with 2300 lb capacity,leaf springs be unable to handle a 20.5 foot pontoon.One side flattened out and caused tire to rub fender .We got them replaced with the only size that it would accomodate and it has...
Can I Remove a Leaf From the Bottom of a 4-Leaf Slipper Spring
should be able to remove the bottom leaf from the 4 to make it a 3 leaf slipper no probs?? | Eh, yeah, don't do that. The weight capacity of the leaf spring will definitely be affected but it will be reduced to an unknown capacity so if you...
Replacement Leaf Springs and U-Bolts for a 1987 Shore Line Boat Trailer
I need help making sure I choice the correct springs. I have a 1987 shoreline T20-23G single axle boat tilt trailer. It currently has a 2x3inch straight axle with the 3inch acting as the height. The lug pattern is a 5 bolt with 4inch CL...
Is There an Advantage to Going to a Higher Rated Leaf Spring with a 3,500 lb Trailer Axle
Are trailer has 3500 lb axel capacity. What would there be any benefits to put 5000 or 6000 lb capacity springs. Thanks | There really wouldn't be a benefit. It would unnecessarily stiffen up the suspension. You still would be limited by the...
How to Pick Out Replacement Leaf Springs for a Trailer with 2 inch Wide Double Eye Springs
I HAVE A SMALL TRAILER THAT HAS 2inch WIDE - 27inch EYE TO EYE - 13 1/2inch CENTER TO BOTH EYELETS. ROUGHLY 3 1/2inch HEIGHT. THEY ALSO HAVE 4 LEAFS. WHAT DO YOU SUGGEST? THANKS | All of the double eye leaf springs we carry are 1-3/4 inches...
Replacement Over-Under Conversion Kit For 3,500 Lb Axle On 2007 Fleetwood Trailer
What is a double eye leaf spring? I have a 2007 Fleetwood Utah, 23/8 axle and want to make sure this kit will work. Thank you | I have attached a helpful article about double-eye trailer suspension you can check out. Basically, the leaf spring...
Recommended 1500-Lb Weight Capacity Slipper Spring For Kayak Trailer
I am replacing my leaf springs on a small kayak trailer. It has the e loop design meaning one side is open to move. they measure from bolt to bolt 24. My question is which set of your springs would work best looking for over 1500 capacity. Thanks...
Should Trailer Leaf Springs Have Higher Capacity Than Axles
Hello, I have a 30ft travel trailer with a tandem axle and leaf spring setup. The other day one of the springs failed while driving home. It seems that the current springs are only rated for 7000lb but the GVWR is 7600lb. I have always been...
Replacement Double Eye Leaf Spring That Measures Out To be 24 Inches Eye To Eye
Im looking for a leaf spring 24 eye to eye and 1 3/4 wide. | Over time leaf springs flatten out after a constant use. With your spring measuring out to be 24 inches eye to eye The 3-Leaf Double-Eye Spring # e66SR will not work for you. You would...
Information Needed to Add Electric Brakes to Car Hauler
I have a car transporter but its only a 2 wheel set up. What do you recomend for a 4 wheel set up to haul a car weing 1600KG ? It must be a 4 wheel set up or not and will a 4 wheel be more stable ? can i fit brakes as well and how ? Thank you. Regards...
Replacement Leaf Springs & Fender Trim For a 2012 Coachmen Clipper 126 Popup Camper
Hey team, Im looking for some parts for 2012 Coachman Clipper Sport 126. It has 13 wheels and its a pop-up camper. 1. I need a leaf spring kit for this camper. Measuring eye to eye it looks like its 19.5, 4 count on the leaf spring, 1 1/8 thick...
Leaf Spring Recommendation for Trailer with 5,200 lb Axles
My trailer has 5200 lb axles. Should I go with the 4-leaf, 5000 lb springs or the 6-leaf, 5300 lb springs? | Your best option would be to go with the 5,300 lb leaf springs as ideally you match the capacity exactly but if you can't then you'd...
How to Find the Length of a Leaf Spring on a 1985 Rustler 2 Horse Trailer
1985 Rustler 2-H Montrose BP GTW 5,460# tandem axles I just ordered replacement shackle straps and was thinking of replacing the double-eyed leaf springs later on. Total length of one spring is about 27. Would the measurement be the same for...
2007 Flagstaff 176 ST Leaf Springs Replacement with Higher Capacity
I have completely rebuilt my 2007 Flagstaff 176 ST. In doing so, my camper is now heavier. After doing so research, Ive learned that Forest River uses 3500 lb rated axels as a standard. However, the leaf springs will need upgraded. Do you by...
Can You Remove a Leaf On the 2-Leaf 1K Slipper Spring with Radius End
Can I remove the second leaf? What is the weight capacity if I do? My trailer will be around 400 lbs. all up, I think the 1000 lb spring will be too much for it. | The 2-Leaf Slipper Spring w/ Radius End part # SP-177275 cannot be disassembled....
Hanger Kit to Install Leaf Spring on Trailer that Has Slipper Springs
The hangers on my trailer are welded to the frame so I can't change them. Do you recommend using slipper springs, instead of the double eye springs that I purchased? | You could pretty easily install the springs you have but you will need to...
Does A 3000lb Axle Need Leaf Springs With 3000lb Rating or 1500lb Rating?
Im purchasing new leaf springs for my 3000lbs single axel trailer, dry weight. Does that mean each leaf spring is 1500lb trailer axle weight to total 3000lbs for the 2 of them? or does each leaf spring have a 3000Lb capacity? Thanks | Leaf...
Replacement Slipper Spring for 1973 Tennessee Boat Trailer
Good morning, I have a 1973 Tennessee boat trailer. I need 2 slipper springs. May be able to get buy with one. I have searched for the correct size and tried to make do with a longer one but no luck. The spring I need is 18 1/2 inches from the...
Square U-Bolt Kit for Mounting Leaf Springs SP-177275 to 1-1/2 Inch Square Axle
I am replacing the leaf springs on an old boat trailer. I have selected Slipper leaf springs 1 -3/4 inch SP177275 but I am uncertain on U-Bolt selection. A mounting plate is already welded to the 1 1/2 inch square axle. I have selected...
Filter Your Search
Contact and Help