!Stampede Travel Trailer  x   >   !QX55  x   >   CE Smith  x   >   2018  x   >  

Single axle utility trailer with 3500 lb axle, 15inch Wheels with 6inch Bolt pattern... What it the common size Lug Nut used?? | Most of the hubs/drums that we offer for 3500-lbs axles, like the # AKIHUB-545-35-G-EZ-K, have 1/2" lug studs and...

I have a 2017 Open Range 297rls Light 5th wheel. The dry weight is 7485 lbs. The GVWR is 9995 lbs. It currently has tandem 4400 lb Lippert axles. Im going to replace the axles with 5200 lb Dexter axles. Since the weight of the 5th wheel...

I have an old boat trailer. The wheels are old and need to be replaced. Currently the tires are 4.80-8. The wheels are center Hubed with 1” bearings, but the hub is only 2 1/2” in length. All the wheels I can find have a hub length over 4”....

Does the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks - 12 Wheels - 14 Boat - 800 lbs trailer have a maximum recommended speed? Thanks, | The speed rating of the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks # CE48870...

Hello , I am looking to replace both my leaf springs on my jet ski trailer I determined that SP-113275 will fit , but I cant seem to find a square U bolt that will. My axle is 1-1/2x1-1/2 and the square you bolt is about 4 inches long and the...

How high do u come above ur trl rail with roller? | It really just depends on your boat trailer setup. If you are using bunk boards as well then you would need the CE Smith Deep V Keel Roller Assembly # CE10455G to sit at a spot where it is...

How far behind the fender should the trailer guides be mounted? My goal is to keep the boat from going over the fender so it doesn’t scratch them. | When installing The CE Smith Post-Style Guide-Ons # CE27640 it is a personal opinion on how...

Can these be shifted completely to one side when mounted, so that the frame is not centered underneath it, or are they slotted only to allow mounting different width u bolts? | Yes, if you'd like you can adjust the CE Smith Narrow V-Wing Bolster...

I would like to buy a storage cover for our 2018 Coachmen Clipper 806LS pop-up camper with AC unit on top and spare tire on rear. Could you recommend what I need? Thank you. | The Adco Pop Up Camper Cover # 290-2892 does well with pop up campers...

What tire/wheel combination do I need for a 2018 Coleman Lantern 263BH with ST205/75R15 tires? Thanks | The spare tire and wheel combination that I recommend for your 2018 Coleman Lantern 263BH is the Westlake ST205/75R15 Radial Trailer Tire...

Bent axle on my 2018 Grand Design 2150 Rb. What recommendations do you have. Also will need installation parts. Would like to go with a heavier axle. Are the usually replaced in pairs? Can supp | Grand Design lists an 86-1/2" 3,500 lb axle for...

Hello, How does the part # UWS01044 tool box mount into the bed? Will I have to drill holes into my bed to bolt down? Truck: 2018 GMC Denali 2500 HD w/factory spray in bed liner. Thank you. | The UWS Truck Bed Tool Chest # UWS01044 does require...

I noticed my 5th wheel camper has 15 inch aluminum wheels and the holes for the lug bolts are 5/8 inch in diameter, while the lug bolts are 1/2 inch. Is this standard? The lug nuts are bulged 60 degree. Would a lug nut with a shank be better?...

I have a 1996 Campion 552, 19’ I/O fiberglass boat. I understand this roller should just “touch” the boat when the boat is fully on trailer, but how about when there is boat weight on the roller when loading? Is there a weight rating for the...

I have a 48 inch wide x 14 foot long Flycraft inflatable boat. Weights about 100 lbs. would mostly use this trailer behind a UTV, for short drives. Would the 12 foot trailer work ok? | Yes, the CE Smith Multi Sport Boat and Kayak Trailer # CE48810...

Hi, I have a small trailer that I use to carry my Hobie Adventure Island. It weighs 185 lbs. plus what I have stored in it. I would like to get a winch post and winch with strap. Would you please put together a few choices of everything I would...

Hi, I have been told that the rollers support the weight of the boat since they contact the keel and the bunks are their to keep the boat latterly secure on the trailer. I just noticed a reply from Chris O. to a customer that said the opposite...

I am looking to replace these axles with at least 5000 capacity ones. Have a hard time finding a replacement that will match the distance hubs and springs. Can you help. Im ok with going from a 5 lug to a 6 lug. | We do have the Dexter 5,200lb...

Hello I am looking for lug nuts for my 2018 Jayco Northpoint. Do you have the ones with the rubber gasket for better tightening? Thank you | We do not carry any lug nuts with a rubber gasket and I personally would not recommend using any rubber...

Will these fit on Timbren ARS2500HDSO2? | The CE Smith Trailer Idler Hub Assembly # CE13611 will fit any of the Timbren Axle-Less systems as long as they use the same # L68149 inner and # L44649 outer bearing combination. This combination is...

How long should my guides be on a 22ft mini day cruiser? | The CE Smith Post-Style Guide-Ons for Boat Trailers # CE27640 will work well on your 22 foot Mini Day Cruiser. 60 inches will be enough if you need to shorten them down you can. The...