Material of Polar Universal Cam-Door Lock for Enclosed Trailers with 2 Inch Keeper
Is this steel or Aluminum construction? I am looking for this type of latch that would take 3/4inch Aluminum pipe. I would be looking for about 30 unit like this. | The Polar # PLR158 with 2 inch keeper is made of steel construction. The...
Replacement Cam Lock Door Latch For Commercial Truck and Trailer Doors
We are looking for a 84 inch rear cam lock for our trailer door. Unfortunately, not seeing any that are long enough. Curious if you make any that are 84. Inches or know where I could get one. Thank you | Based on your image it looks like you...
Dimensions of Polar Stainless Steel Wide Bracket Strap Hinge
what are the dimentions of the butt portion and the width of the long portion? | The 12 inch strap of part # PLR2012-SSP measures 2 inches wide and the bracket measures about 4-1/2 inches by 3 inches. You can see most of these measurements taken...
Hardware Needed To Install The Cam-Action Lockable Door Latch w/ 36 Pipe for Enclosed Trailers
I need the bolt kit to install the Action Lockable Door Latch 36inch | We typically recommend just reusing the hardware you already have when installing the Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers # 305736. If this is...
Does The Polar Vent for Enclosed Trailers Have An Interior Mounting Piece
Is there an inside component to this vent or only an outside piece? | The Vent for Enclosed Trailers # PLR20 would only mount on the outside of the trailer and would not have a piece to go inside of the trailer. I recommend using some butyl...
Dimensions For Cam-Action Lockable Door Latch # PLR658-SSP
Hi, Would you please send me PNs for the assembly kit 658-SSP Polar Hardware Heavy Duty Lock Kit for Enclosed Trailers - Polished Stainless Steel - Bolt-on? Are they going to be identical for both left and right hands? Please also provide me...
How Does Paddle Handle Locking Latch # PLR5115 Normally Fit Door
I have a Wells Cargo assembled trailer with this style lock. It has an interior panel that screws into the exterior one holding it in place. I do not see any holes for hardware on the lock that you carry. How would you install your product?...
Quantity of Replacement Hasp for Polar Cam-Action Latch
How many are included in the purchase? | The replacement hasp part # PLR158-102-SS is sold individually. |
Does The Square Corner Hinge with Reverse Bracket # PLR2212-SSP Have a Specific Weight Capacity?
Hello, I am customizing a cargo trailer with barn doors. I want to hang tools and equipment from the doors if possible and am wondering how much weight the hinges can handle and whether I should add extra hinges. | I reached out to Polar Hardware...
Dimensions of Square Corner Hinge with Reverse Bracket PLR2212-SSP
I am designing an enclosure and would like to use these hinges. Is there a pdf available with dimensional data? Thanx, | I have attached for you below a dimensional drawing of the Square Corner Hinge with Reverse Bracket part # PLR2212-SSP...
Diameter and Standoff of Easy Grip Assist Handle # PLR6624-SSP
Easy Grip Assist Handle # PLR6624-SSP Diameter & Standoff As the title says, Id like to know the diameter of the bar for Easy Grip Assist Handle # PLR6624-SSP as well as the standoff distance? | The diameter of the Easy Grip Assist Handle #...
Hinge that Can be Used on Legend Trailer Ramp
I would like to know if you have a hinge you could recommend? I have a Legend aluminum trailer that has a 2 piece ramp. It hauls a Honda Talon side by side of a golf cart. the tube is 1.5X1.5x1/8 thick. I can modify the width if need be. Thank...
Does T-Strap Hinge # PLR3416 Have Weight Capacity
what is the weight capacity of the PLR3416 hinge? I am trying to hang 48inch wide wood doors that are between 150-200#s. Not really sure if these would be long enough. I was considering using4 hinges per door 2 at top, 1 center and 1 at bottom...
How Does the Pipe Attach to the Cam Lock Assembly on Polar 658-002?
I ordered the plr658-002 kit and it arrived on schedule, but without instructions. It seemed fairly self explanatory, other than a couple of items. Which size pipe do I need? Which schedule? The video says 1inch schedule 40 but the written...
Replacemet Zinc-Plated Steel Lugs and Keepers for Polar Cam-Action Latch Kits
I need the top and bottom lugs and keepers with the zinc coating. What all parts do I need? | Here are the lugs and keepers with the Zinc-Plated Steel design from Polar: Lugs - Top # PLR158-207 - Bottom # PLR158-206 Keepers - Top # PLR158-202 ...
Is There a Solid Steel Bar Connection to Cam Holder for 10K Dump Trailer Available?
I am looking for a replacement lower cam for a 10k lb dump trailer. This trailer does not have a pipe for the cam action, it has a solid steel round bar. Is this a replacement piece that you carry? Thanks in advance. | It sounds like you...
How To Choose the Correct Length Bar for the Cam-Action Lockable Door Latch
I want to install side door bar lock on my trailer. There was not any bar lock on previously. My question is, how do I decide which size bar lock to use? I see 36, 45 and 55inch if they would all technically fit? Thanks! | In regards to Cam-Action...
Is Hasp Included With Side-Door Bar Lock Assembly
On part number 305736 is the hasp included. Where the bar itself locks. | Yes, the hasp - or keeper latch - is included with the 36" Lock Side-Door Bar Lock Assembly # 305736. The only thing you will need to get separately are is the mounting...
Installing Cam-Action Lockable Door Latch Cam Lug End to Pipe
Do the cam lock ends model 383200 fit via friction ie. do you drive them in with a hammer or do you drill through the pipe and fitting and install a fastener? Thanks! | Cam-Action Lockable Door Latch Kit w/ Narrow Hasp for Small Enclosed Trailers...
Availability of Rear Swing Down Door Hinge
Looking for rear swing down door hinges.thank you | It sounds like you're looking for a hinge like the Ramp Door Hinge # PLR1902. This heavy-duty hinge replaces a damaged hinge on your trailer's ramp or access door. It has a steel construction...
How to Choose Correct Trailer Hinge
I need a replacement hinge for a 2000 sooner horse trailer gooseneck. | We don't have any way of knowing what hinge is on any one trailer, so you'll need to determine both the type of hinge you need, how it installs, and the correct measurements. For...
Can the Universal Cam-Door Lock Be Used on 42 Inch Doors
Are these strong enough for rear cargo doors on a farm grain truck with 42inch sides? | The Universal Cam-Door Lock for Enclosed Trailers # 383200 that you referenced are the same kind of door latches that are used semi-truck trailers. As long...
Piano Hinge Recommendation for a Aluminum Ramp so that It can Fold
Im looking to convert my aluminum ramp into a bifold. Do you have aluminum hinges? | A piano hinge like the part # SH300 would work great for you to allow you to fold your aluminum ramp in half. This hinge is stainless steel too so it won't...
Is 55" Lock Side-Door Bar Lock Assembly # 3057-55 the Same as # 305736 Except for Longer Length
Ive got a broken door bar latch on my cargo trailer that Im looking to replace the handle weld broke off the pipe. The cam bar on the trailer is 55inch so it looks like your product 3057-55 is what Im needing. However, there are no pics of...
Filter Your Search
Contact and Help