Will TorkLift SuperHitch # TLF1000 Fit 1988 Ford F-350 and is Drilling Required
Will this fit my 1988 F350, and will I need to drill? Also, is this the heaviest duty hitch that you offer for my application? | If your 1988 Ford F-350 is equipped with the standard factory or step bumper the TorkLift SuperHitch # TLF1000 is...
Front Hitch for 1986 Ford F-350
Will this hitch fit the front of my 86 F350 2 wheel drive, crew cab dually ? | The B&W Heavy-Duty Trailer Hitch # BWHDRH25122 that you referenced is confirmed to fit your 1986 Ford F-350 Dually, but it's designed to install onto the frame...
Modifications to Bumper Cover to Install Curt Class II Trailer Hitch on 2000 Cadillac Eldorado
Would i have to cut hole in rear bumper cover for this hitch? | Installing the Curt Class II Receiver, part # C12068 on your 2000 Cadillac Eldorado would require no cutting, trimming or other modification in the rear bumper cover. According...
Frame Mount Camper Tie Downs that Fit 1989 Ford F-250
Looking for frame mount. Camper tie down brackets. To fit 89 ford F250 4 x 4. Look at the install manual | For a set of frame mounted camper tie downs that fit your 1989 Ford F-250 we have the Happijac Camper Tie Downs # LC182910-182971 that...
Stromberg Carlson 100 Series 5th Wheel Tailgate for a 1989 Ford F-250
Will this tailgate fit a 1989 F250? | For your 1989 Ford F-250 you want to use the Stromberg Carlson 100 Series 5th Wheel Tailgate # VG-100 instead of part # VG-97-100 as the part that you referenced fits newer models Ford pickups. Attached...
Do All 7-Way Sockets Have Tab to Hole 7-Way Plug in Place
Having to replace socket on my F250 due to the center of the cover with the lug that engages the plug to hold it in broke out. I’m assuming all socket lids have a similar tab to engage the plug to prevent it from vibrating out, but I wanted...
Converting An Inverted Fifth Wheel Trailer Hitch To Gooseneck Hitch
I just redid a 2001 Adam stock trailer thats a goose neck, I just picked up an 89 F250 with a pop up kingpin hitch in it. My question is, can I out the goose neck tube on the trailer for an inverted 5th setup on the trailer? I know you can...
How Does Draw Tite Hitch for 1986 Ford F-350 Install
looking at a hitch for an 1986 f350 dually. all these options appear to mount on TOP of the frame, vs in the factory location where the bolts go thru the side of the frame. perhaps your descriptions are a bit off or the photos of the hitches...
Fifth Wheel Frame Brackets for 1985 Ford F-250 that Require No Drilling Into the Frame
Hello, I am looking for fifth wheel frame brackets that would fit a 1985 F-250 without having to drill holes into the frame of the truck. If you could help me find those that would be greatly appreciated. Thank you, | Although we do not have...
5th Wheel Trailer Hitch for a Flatbed 1990 Ford F-250
I have a Reese 14k 5th wheel hitch. What is the railing kit I need to mount it in my, 90 F250 lariat flatbed pickup. | Flatbeds are unique in that the bed is further from the frame than on a regular truck bed. The installation kits are not designed...
Does Pro Series 5K Square Drop Leg Trailer Jack Get Welded Directly to the Trailer Frame
I do not see any type of weld plate in the pics. Do you just weld the square channel of the jack to the frame or is there a plate? Thanks | For Pro Series square drop leg trailer jack # PS1400850383 you will just weld the outer square tube to...
Underbed Installation Kit and 5th Wheel Hitch for a 1989 Ford F-250 w/ 8' Bed
I have a 1989 Ford F250 Super Cab 3/4 T 4x4 8 ft bed with lift springs. I have a 2001 Keystone Springdale 242 RL 5th wheel trailer GVWR 7880 lbs. What hitch is recommended with below bed rails? | The only 5th wheel hitch that we have that...
What Camper Tie Downs are Needed on a 1991 Ford F-250 with 10' Truck Bed Camper
Will these work for a 1991 Ford F250 and a 10foot camper that hangs over the end of the truck about 2? | I have a solution for you but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are designed to be used with truck bed campers up...
In-Bed 7-Way Wiring Recommendation for a Camper on a 1987 Ford F-250
i bought an 87 F250, and then an old camper to fit on it. it weighs 2100 lbs dry. it has a pigtail and a 7way plug that is meant to plug in just behind the driver inside the bed. i cannot decide which outlet i should purchase, or if i should...
Tools Needed to Install Draw-Tite Trailer Hitch 75038 on a 1988 Ford F-150
i need to make sure this hitch will fit and what is required to install , i am getting up in years. | The Draw-Tite trailer hitch # 75038 does fit a 1988 Ford F-150 with a standard or step bumper. I have included a link to a video to the right...
Manufacturer of etrailer Hub and Bearing Kit
Can you tell me the Brand name for bearing kit BK2-100? Thanks | The etrailer Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle item # BK2-100 is manufactured by TruRyde. |
What Are Mounting Hole Dimensions On Draw-Tite And B&W Hitch For 1987 Ford F-250 Truck
Hello. I am replacing the hitch on my 1987 ford f250 with standard bumper. I have an eaz-lift-V5, but am looking to install a higher capacity hitch. How ever, i would perfer not to drill any new holes in the frame rails. The distance between...
Does 1986 Ford Pickup Westin Fey Surestep Deluxe XLT Rear Bumper Have a Center Pad
Is there a matching polymer pad to cover the center hitch ball section of the Westin-Fey 21007-92230? A higher capacity hitch will be needed. Tks | The molded polymer plastic step pad on the Westin Fey Surestep Deluxe XLT Rear Bumper # 21007-92230...
How to Wire in an Electric Trailer Brake Controller Pulse Preventer
I have a 1986 Ford f350. I spliced into the cold side of the brake switch, keeping the original brake wire traveling to the brake lights. So now.... Question Do I conect the Yellow wire to the cold side brake wire. and the brown wire to the...
Installation Kit and Rails for Reese 5th Wheel Trailer Hitch and 1990 Ford F-250 Long Bed
Howdy, I have this hitch minus rails or install hardware. Do you sell a vehicle specific install kit, or really any kit with rails for this? Its going into a 1990 f250 long bed. | We do have 5th wheel trailer hitch installation kits for your...
Adjustable Ball Mount Recommendation for 2018 Ram 3500 with 2-1/2 inch Hitch
18 Ram 3500 Factory 20 wheels, What would be an adequate drop on an adjustable ball mount ? | For your 2018 Ram 3500 with a 2-1/2 inch hitch the B and W adjustable ball mount that would be the best option would be the part # BWTS20040B which...
Adapter to go From 3-1/2 inch Diameter Pipe to Bayonet Fitting
The sewer line on my old late 80s early 90s hornet truck camper appears to be 3-1/2 inch diameter. None of the sewer hoses/bayonet fittings I have tried will fit because they are too small. Is there an adapter that can connect to my new Rhino...
Option to Install Trailer Wiring on 2000 International 3800
Hi I have a 2000 international 3800 school bus and I need to hook up trailer lights do you have something? Thank you. | While we don't have a custom fit trailer wiring kit that would fit your 2000 International 3800 you could use the part #...
Instructions and Measurements for Installing a 5th Wheel Hitch in a 1986 Ford F-250 Long Bed
Hi I have a 86 f250 long bed and bought a 5th wheel hitch and lost the instructions before installing it in my truck and was wondering if you could help with the measurements from the rear of the bed to the front of the rail on the rail closest...
Filter Your Search
Contact and Help