Replacement Rear Hub Caps PH1764 for Freightliner Custom
The left rear hub cap fell off of 2016 freightliner custom chassis the numbers I got off passenger side hub cap was PH1764 and PH1763R Phoenix but my measurements was 9 1/8inch high and 9inch diameter but my measurements might be off. just...
What is the Difference Between Left-Handed and Right-Handed Threads?
For rear center cap hub why right hand or left hand thread | Even though most threads on bolts use right-handed bolts/nuts, some special scenarios warrant a left-handed thread. When wheel accessories like the Phoenix USA Rear Wheel Center Cap...
Will the Phoienix USA Baby Moon Hubcap Fit a 14' Boat Trailer?
Will this fit an old 14 boat trailer wheel with bearing buddies? | As long as your 14' boat trailer has a 221mm (8.7", 22.1cm) hub bore with a 4-spline design then the Phoenix USA Baby Moon Hubcap - 8-7/8" Diameter # PXQ1400 will work great. If...
Replacement Left Hand Thread Wheel Cap For Freightliner That Includes Bracket and Center Knob
I have a Freightliner Chassis Motorhome and it came with These axle caps, I found out the hard way that the retaining damage by shop removal bolt/centerpiece is left hand threads on left side. I’m looking for the correct kit to replace it, your...
Will the Quicktrim Trailer Hub Covers will fit the Wheels of 2008 Flagstaff Camper Trailer
Id like to confirm if the QT545C trailer lug-nut/hub cover will fit my particular model. It has 5 lug nuts but Im unsure how or what to measure to confirm this part is the correct choice. | You will need to have a bolt pattern of 5 on 4-1/2...
Baby Moon Hub Caps for 1958 Chevy Apache Pickup with 17.5" Wheels
I have a 1958 Chevy Apache 3/4 ton pickup with 17.5inch wheels. i am missing one babymoon hubcap. the wheels have tabs on them to hold the cap on. do you have a replacement cap? | I did some looking around and it looks like we only have baby...
Shroud for 5th Wheel Pin Box, and Fender Covers
1...I need a new shroud grey for 5th Wheel Pin Box for our 2011 Heartland Big Horn. Which one should I order for a proper fit? 2...I also need grey fender covers for the same camper. Which do I order for a proper fit? | We only carry pin...
Will Phoenix USA QuickTrim Hub Cover Fit on Lug Bolts Instead of Lug Nuts?
Will this work with lug bolts? My trailer dose not have lug nuts | As long as the wheel bolts on your trailer have a 1/2" head, you will be able to use the Phoenix USA QuickTrim Hub Cover # QT545C on your trailer wheels. If you have a different...
How To Determine The Correct Lug Nut For Motorhome Wheel
Do you have the lug nut that goes under the chrome cap. For A 22.5inch wheel | To find the correct sized lug nut you would need to measure the diameter of the stud and the thread pitch to determine the correct fit. From there you could choose...
Options for Fender Skirts for 2016 Shasta Revere Travel Trailer
I am trying to find fender skirts for my 2016 Shasta revere travel trailer. Any help appreciated | We have fender skirts in various widths but it comes down to how wide you need. We have 2-1/2 inch wide by 61 inch like with # PX52-188 which...
Should I Use a Left or Right-Threaded Center Cap on My Motorhome?
I need a cap and the accessories for the left side drivers side of my motorhome / Freightliner chassis. If its going on the left side would I need a left threaded or Right Threaded? If I have to start to thread it to the left is it a left thread...
Lug Nut Covers for Monaco MH on Workhorse W22 chassis 22.5 Wheels
I cant seem to find the appropriate size lug nuts that hold on the wheel covers and the cover for the lug nuts also. I have a Monaco Monarch 37foot gasser which rides on a 2005 Workhorse W22 chassis and the wheel size is 22.5. | I looked up...
What Does Right Hand Thread Mean Of Phoenix USA Wheel Center Cap
I’m assuming there’s a RH and LH and thats due to threads? Where can i get a socket or tool to fit this? | The Phoenix USA Wheel Center Cap part # PXQ2010 has right hand threads (threads run clockwise) but that does not mean there is a left...
Availability of Baby Moon Hubcap for Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel
Do you know if there is a bay moon cap that will work with this wheel? Do you carry it? | We do have baby moon hub caps available like the # PX1307SS Phoenix USA Baby Moon Hubcap. Unfortunately, we do not carry one that will fit the 10" wheel...
Replacement Wheel Ring for Exiss Featherlite Trailer
I had a trim ring stolen recently and have looked for a replacement. The dealer said these are specific to older Featherlite and Exiss trailers and may be hard to match. Would this trim ring match what Ive got? | Your trailer wheel looks like...
Installing Plastic Hub Cover on Trailer Wheels
So, do you align the bolts in any way or just snap it on no matter where the lugs are aligned? Its a 5 x 4.5 with standard lugs. | The Phoenix USA QuickTrim Hub Cover for Trailer Wheels - 5 on 4-1/2 - ABS Plastic - Chrome - Qty 1 # QT545C does...
What Wheel Cover Will Fit My 19-1/2" Alcoa Wheels
The covers I have now have six permanent Lugnuts and two that hold the cover to the wheel, is this the same design or do these covers have eight lug nuts per cover? Also I have eight lug 19 1/2 inch Alcoa wheels, on a 2012 Seneca, will they...
Will the QuickTrim Trailer Hub Cover QT545C Fit a 14 Inch Wheel with 5 on 4-1/2 Bolt Pattern
Hi will Part Number QT545C work with these wheels? I read all the sizes and it sounds like they should, but the picture looks like the rim has a lip that may interfere with the cover/cap. | Trailer wheel hub cover # QT545C fits on a wheel that...
Can QuickTrim Hub Cover for Trailer Wheels Fit Lug Nuts That are Removed by 13/16" Socket?
I have trailer wheels with 5 on 4 1/2 lug placement, so the mentioned item number seems to match my wheel requirements. Where I get confused is the statement that it fits 1/2 inch lug nuts. My lug nuts require a 13/16 inch socket to remove...
Hub Cover that Fits Alcoa Wheel of 2004 Ford F-550
Will this fit the 2004 ford f550 rear Alcoa’s? Also do you have a matching set for the front? | I looked up the wheel bolt pattern of your 2004 Ford F-550 and it has a 10 on 225 mm bolt pattern. So for the rear you'd want the # PXQH2001R and...
Availability of Quick Chrome Trailer Hub Cover for 5 on 5-1/2 Wheel Bolt Pattern
Do you have a similar hub cover that will fit a 5x5.5 hub? | Although we don't have a hub cover that's compatible with a 5 lug on 5-1/2 inch bolt circle, I might have a solution that would dress up your wheels. If you could reply with the diameter...
Smallest Baby Moon Hubcap Option For Trailer Wheels
I am looking for baby moons for my 2022 Yamaha Drive2 golf cart with factory 10 inch rims. Would you have anything that would work for me? | I took a look at what we carry, and while we do carry plenty of Baby Moon hubcaps, the smallest sized...
Coleman 1996 Laredo Pop Up Camper Replacement Wheels and Bearing Kit
Coleman 1996 Laredo Pop Up Camper Vin # 4CE670D17T7281373 We just purchased this camper and will be doing a complete renovation. Wanted New Better Tires . . . will this work/fit? Kenda 5.70-8 Bias Trailer Tire with 8 White Wheel - 5 on 4-1/2...
Will the Phoenix USA Seasonal Tire Storage Bags Fit Tires That Are 275/65r18
Will these fit tires that are 275/65R/18? | Yes. The Phoenix USA Seasonal Tire Storage Bags w/ Hardware Bag - Black - Qty 4 # PXTBKP02 are designed to fit on tires that are up to 33" tall and up to 12" wide; tires that are 275/65r18 are 32.1"...
Filter Your Search
Contact and Help