bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Wheel Covers Hubcaps Help Hub
  4. Wheel Covers Hubcaps Q&As
  5. Question 430849
Q & A Icon

Hub Cover that Fits Alcoa Wheel of 2004 Ford F-550  

Updated 04/13/2020 | Published 04/11/2020



Question:

Will this fit the 2004 ford f550 rear Alcoa’s? Also do you have a matching set for the front?

0

Expert Reply:

I looked up the wheel bolt pattern of your 2004 Ford F-550 and it has a 10 on 225 mm bolt pattern. So for the rear you'd want the # PXQH2001R and then for the front you'd want the # PXQH2001F.

expert reply by:
0
Jameson C
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on Accessories and Parts

Videos

Help Articles

Expert Answers

Others Also Watched
Phoenix USA Front Hub Cover w/ Pop Out Spec Review
Replacement Phoenix USA Hub Cover for Front Wheel: The Breakdown
Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
In-Depth Look at the B&W 5th Wheel to Gooseneck Pin Box
Checking Out the Pace Edwards Switchblade Retractable Hard Tonneau Cover
How to Install the TorkLift SuperHitch Magnum Trailer Hitch Receiver on a 2021 Ford F-450 Super Duty
Mount: TorkLift Tie Downs on a 2022 Ford F-250 Super Duty
The Low-Down on the TorkLift Talon Camper Tie-Downs
Others Also Read
Trailer Wiring Diagrams
How to Measure for Trailer Hitch Drop
How to Measure Your Trailer Wheel Bolt Pattern
The 5 Best Trailer Drop Hitches You Can Buy
30-Amp and 50-Amp RV Service: What's the Difference?
Most Popular Wheel Bearings
How to Mount a Truck Bed Camper
Determining Trailer Tongue Weight
What Do I Need To Tow A Trailer?
Stability Control for Heavy Duty Vehicles
Others Also Asked
What is Difference Between Phoenix USA Hub Covers PXQH1002R VS PXQH2001R

While very similar the covers are designed for different year ranges of the Ford F-550 like the 2020 model that you have. Since yours is a 2020 the correct one you need is the part #PXQH2001R whereas the #PXQH1002R fits older versions of the RV.

view full answer...
Replacement Hub Cover, Part Number QH-2001F

The part you need is the Phoenix USA Front Hub Cover w/ Pop Out - 10 on 225mm - ABS Plastic - Qty 1, part #PXQH2001F, you attached to your question. I have included a video review link below.

view full answer...
Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...
How Much Do the Power Mountain Tallboy Off-Road Bottle Jacks Weigh?

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...
Availability of Heat Strip or Heat Pump for Furrion Chill Cube RV AC

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...
Will the Power Mountain Tallboy Off-Road Bottle Jack 27-1/16" Lift be Suitable for My 5th Wheel?

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...
High Quality Frame Mounted Camper Tie-Down Brackets For 2026 Ford F450 8 Foot Bed With OEM Hitch

Good afternoon Ron, congrats on the new truck! Those are sweet. For your application with the 8 foot bed, OEM hitch, no running boards etc., you'll want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL87DR. They also come in…

view full answer...
Will 2019 Ford F-450 Require New Rear Tie-Downs Installing TorkLift Hitch

Hi Steven; if you install the TorkLift SuperHitch Magnum #TLF1008-30 you will need different rear tie-downs for your F-450. The TorkLift Camper Tie-Downs #TLR3504 will replace what you have now. If you switch to a different aftermarket hitch you will…

view full answer...
How Is TorkLift SuperTruss Hitch Extension Length Measured

Hey Duane, welcome back! The TorkLift SuperTruss Hitch Extension #TLE1532 has an overall length of 32". This is measured from the end of the SuperHitch receiver to end of SuperTruss receiver. What are you towing with your Silverado?

view full answer...