Can a 1-1/4 to 2 Inch Hitch Adapter be Used on a Trailer Hitch for a 2012 VW New Beetle Turbo
i have a Hollywood bike carrier... 2. Would a 1 1/4 to 2inch adapter work with the Draw-Tite? | All of the trailer hitches for the 2012 Volkswagen New Beetle, turbo, are Class I trailer hitches with a 1-1/4 inch receiver. To use a 2 inch accessory...
Shank Extension Options to Extend Swagman XTC 4 Bike Carrier Past Vehicle Bumper
I need an extra 2 inches on the swagman xtc 4 bike trailer shank to clear the bumper when folded up. Do you have a longer shank? | I may have a solution for you, but Swagman does not offer longer replacement shanks for the XTC 4 Bike Rack, #...
Difference Between Brophy # BM20 and # BH20 Ball Mounts
What is the difference between your BM20 and BH20? | The Brophy Ball Mount # BM20 and the Brophy # BH20 referenced in your question are extremely similar to each other. They are both designed for 2 inch trailer hitch receivers, have a 10,000...
Availability to Extend Distance Of Trailer Hitch For Towing a Toy Hauler Without Using an Adapter
I tow a toy hauler. I would like to be able to open my tailgate while hooked up to the trailer. I see hitch extenders reduce the capacity of the hitch. Is there a way to increase the length by at least 3inch but still allow me to pull my trailer...
Will the Brophy Camper Hold Down Brackets Fit a 2004 Ford F-250 Super Duty 4x4 Straight Cab 8 ft Bed
little nervous about wether or not these will work on my 2004 F-250 Super Duty, 8foot bed 4X4, straight cab with a sportsman 9foot camper, weighs 1650 lbs. Thanks in advance | The Brophy Camper Hold Down Brackets, part # HSSF are a universal-fit...
Is the HSSF or the TDSF Slide In Camper Tie Down a Fit for 2012 Silverado
my pick-up is a silverado 2012 it seem to have a double bed can i use the tdsf instead of hssf and about the total lenth of 8 ft my camper is a pop up camper of 1300 lb and the floor is 8 ft but 11 ft with the part over the cab will the tie...
Camper Hold Down Recommendation for a 2011 Ford F-150
can your camper hold downs fit and hold my camper on a 2011 f-150 supercab? | The Brophy Camper Hold Down Brackets, part # HSSF are a universal-fit item that will work on most full-sized trucks, including your 2011 Ford F-150 as long as the...
Can a 1-1/4 to 2 Inch Hitch Adapter be Used with Curt Trailer Hitch C11282 on a 2012 Chevy Cruze
I just bought a new 2012 cruze with the rs package. My current bike rack is a 2inch receiver. i kow that the hitch for the car will be 1 1/4 and I know you can get the reducers to reduce my bike rack from a 2inch down to a 1 1/4. Will this...
Availability of Camper Tie Downs for 2012 Ram 3500 Dually
Does Brophy have tie downs for a 2012 3500 Dodge dually, Crew Cab | The fit of the HSSF bracket will depend on the sidewall construction of your truck bed. Take a look at the provided photo. In the center panel, you can see that the bracket...
Will the Camper Hold Downs, # HSSF Fit a 1975 Rancho El Rae and Ford F-250
will these tie downs hold a 1975 rancho el rae with a weight of 1990lbs i have a f-250 6.5 bed? | The Camper Hold Downs, # HSSF, will work with any camper that is a fit for your truck. These hold downs do have some limitations as to what trucks...
Brophy Camper Tie Downs that Fit 2016 Ford F-150 Short Bed
Well these work with a 2016 Ford F-150 bed? It looks like there would not be enough space underneath the bedrail. | According to my contact at CR Brophy Machine Works, their # HSSF truck bed camper tie-downs are compatible with the 2016 Ford...
Repair Broken Rivets on Brophy Camper Scissor Steps
Need rivets to repair | While we do not have a specific rivet repair kit for the Brophy Camper Scissor Steps, # AS03, we do have the Rivet Gun # PT99ZR and Replacement 1/8" Rivets, # WM9026-40 available. |
What Material is Brophy Stop Plate for E-Track Part # ETHSB Made From
What material Brophy Stop Plate for E-Track Part # ETHSB is made of? Is it magnetic? Thank you! | The Brophy Stop Plate for E-Track # ETHSB is made of steel. It is not magnetized but this is a magnetic material. |
Weight Distribution System and Shank for a ToughCountry Deluxe rear Bumper
I have a ToughCountry Deluxe rear Bumper. It is made using a 4 piece of pipe with the ball mount cut inside the pipe. It requires a ball mount to have at least 5 1/4 length between the pin hole and any obstruction ie bend, gusset etc. so that...
What Can I Do if I Do Not Cannot Clear My Rear Bumper with the Swagman XTC4 # S64665?
Hi, I have just purchased a hitch I have successfully installed and a bike rack Swagman XTC4 Bike Rack for 4 Bikes - 2inch Hitches - Frame Mount and the rack do not fold up straight/upright since the clearance is not enough. It needs at least...
Which Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor
Do you offer backing plates for Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8inch Wide - Recessed Mount - 1,600 lbs Item # RR05 | Yes. The Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor # BP05 is the correct backing plate for the...
Does the Brophy Cable Camper Jacks Come With the Upright Posts
Other company reviews for the same product say the poles were not included. Are they included if I buy from etrailer? | Yes, I cannot speak for our competitors but I can assure you that the Brophy Cable Camper Jacks part # CJ41 do come with...
Available Frame-Mounted Truck Camper Tie Down Kits for 2015 Ram 1500
I am looking for some stake pocket tie down like the brophy models for my 2015 ram 1500. I see on the installation pdf for this product that they do not work for pick ups newer than 2010. Do you carry or can you recommend a product to use to...
Dual Receiver Hitch Adapter to Allow Towing and Use of Hitch Cargo Carrier
I am looking to tow a Malone Microsport and carry a cargo rack off the back of my Dodge Journey. Have used the Microsport for over a year with our set up no problem, but need to get some distance between the tow hitch receiver and the cargo...
Why Does Hitch Extender for Class I Hitch Cut Weight Capacity
Why dos it cut capacity in half | Using a hitch adapter with a hitch like the # C11067 does cut the capacity of the hitch in half due to the fact they add length which creates more leverage and movement. The added length puts additional torque...
Can Erickson Hide-A-Hook Truck Or Trailer Anchor Be Used In Stake Pockets?
Show me how these can be used with stake holes | There are several tie-down anchors available for stake pockets, but the Erickson Hide-A-Hook Truck or Trailer Anchor (2 Pack) - 1,200 lbs # EM09094 that you were looking at will not fit stake...
Can 4-Slot Horizontal E-Track # ET4S Install with Rivets
Can you elaborate on what you mean by attachments with rivets on base not working with the Brophy 4 slot track? All of my attachments and the majority I have seen have rivets. | The 4-Slot Horizontal E-Track # ET4S that you referenced can be...
Availability of 2 inch to 1-1/4 inch Hitch Adapter for Kuat NV Bike Rack
I am looking for a Class 1 1.25 inch to 2 inch Hitch adapter. I have a 2 inch Kuat NV 2 that Id like to use on my Girlfriends 2002 Honda Accord that we are putting a 1.25 inch Class 1 hitch on. Do you guys have that adapter? Thanks! | We have...
Extended Ball Mount Measurements and Compatibilities for a 2012 Chrysler Town and Country
I want to use a extra long ball mount #bm20 on a 2012 Chrysler Town and Country mini van so I dont have to back the trailer as far into the boat launch.Would that be OK. | You won't have any problems using the Extra Long Ball Mount, # BM20...
Filter Your Search
Contact and Help