!Outback Wagon  x   >   !Telluride  x   >   !DuraStar  x   >   Jif Marine  x   >  

what is the distance between the top of the round rod holder itself and the top of the top mounting bracket ? i want to mount the top bracket as close to the top of my boats mounting surface that way the butt end of the fishing rods have more...

Would you please provide the mounting hole dimensions size and locations? Thanks | I attached a picture that shows the dimensions of the JIF winch # 315-W2500D as well as another picture that shows the overall dimensions of the jack. |

Im right-handed can you change the handle to the other side? | We do have the Dutton-Lainson Hand Winch # DL15403 which places the handle on the left side. This is a 2-speed winch like the Jif Marine # 315-W3200D you found. It is rated for up...

Hello, I bought this winch but realized the handle was too long and hits my boat as I try to turn it. I realize this is my own fault for not measuring before buying, but was wondering if you had any handles that were 6-8inch that would be able...

what size hand winch do i need for this size boot | Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short...

DL1100A winch. Can you tell me what ratcheting handle I need to replace my standard handle on my dl1100a | While there is a replacement handle for your Dutton-Lainson Hand Winch # DL15103 (which is model DL1100A), the Replacement Winch Handle...

I have a Windline ladder that looks like the Jif product you sell. I need replacement cups and need to confirm the inside dimension of the Jif cups that you sell. Thanks for your help. | The inner diameter of the Replacement Mounting Cups for...

I need a winch for my boat trailer. Right now there is a 1600lb winch on the trailer. It should include a strap. Attached is a picture of the current trailer winch and a picture of the boat on the trailer. We ramp launch the boat and trailer...

My father purchased a trailer from you order 109248336 for a CE48870 CE Smith Multi Sport Plus Boad and Kayak trailer. We will be using it with a Saturn SD470 inflatable boat. I there a transom saver you have that would work good with this setup...

I have a 6500# boat. Looking for a 2 speed winch. Pls advsie | For your 6500lb boat I highly recommend the Jif Marine 2-Speed Trailer Winch # 315-W3200D which has 2 speeds like you were looking for, and the 3200lb capacity will be plenty to...

What size of hardware is recommended? Lag screw or Bolt? | To install the Jif Marine Dock Bumper # JIF57VR you will want to use 1/2" diameter stainless steel screws. |

Can I get replacement parts for the Jif 3200lb hand winch. | The only replacement part available for the Jif 2-Speed Boat Trailer Winch # 315-W3200D is the Hand Winch Strap with Safety Hook # DL24242. |

can i buy an extra surface mount base? | Yes, the replacement base part # 315-DTY is available for the Rectangular Boat Table # 315-DSH-KS that you referenced. |

Do you think your item Tourney Transom Saver - 25inch to 36inch Long - Aluminum Item # 315-FXK would fit on/attach to the mount already installed on my trailer? See attached photo. | I went out in our warehouse and measured the Tourney Transom...

I HAVE A 14foot JON BOAT WITH A 6 HP YAMAHA OUTBOARD MOUNTED. THE TRANSOM NEEDS TO BE FLUSH OR CLOSE TO THE STERN OF THE TRAILER IN ORDER FOR A TRANSOM SAVER TO BE USED. THE CE48870 IS TOO SHORT. IS THERE A TRAILER AVAILABLE ABOUT 16 foot...

what the the mounting hole dimensions? | If you're wanting the size of the pre-drilled mounting holes on the # 315-FOG4 they are 1/4". If you're looking for the distance between the mounting holes I have attached a diagram below showing the...

I need to repair the ratchet catch, spring and bolt on my Fulton T1200 winch. | Unfortunately there are not any replacement parts available for your older Fulton T1200 winch aside from Replacement Handle for Fulton Hand Winch - 9" # F501109....

Are these deck screws #8 | Yes, the JIF Marine Self Tapping Deck Screws # JIF78VR are indeed #8 screws. They measure 2" long by 4.75 mm. |

What is the total circumference, outside diameter of this product? | The Rectangular Boat Table # 315-DSH-KF is 28 inch by 16 inch overall in outside dimensions. |

Hello... Ive got a 2022 Montauk 170 with a 4-stroke 90HP CommandThrust Mercury outboard motor. Im interested in purchasing your Comfort Ride Transom Saver - 27 to 36 inches Long - Aluminum and Stainless Steel - 315-FXH . Attached are a few...

I recently purchased a boat trailer with a Dutton-Lainson winch 315-W2000D on the trailer. The ratchet gear is stripped and I cant locate a repair kit for it. Can you help me out please ? | The Single-Speed Boat Trailer Winch with 20' Strap...

Do I need to purchase some kind of additional locking gear for this product? | The Jif Marine 2 Speed Winch part # 315-W3200D that you referenced will lock with every gear click as you turn the handle. The only way it's going to free wheel is...

Have a new 16foot open car hauler trailer 14foot bed, 2foot dovetail. Would like to mount a hand winch on the front for the rare occasion of pulling a rolling utility tractor 2,500 lbs or possibly a small auto, up onto the bed. What hand...

Ive got a trashed T3205 and wondering if this model will be a good replacement? Thanks much. | Yes. The Jif Marine 2 Speed Trailer Winch # will work as a replacement for your old Fulton T3205 winch. It has the exact same 5.1:1 and 12.2:1 gear...