Solution for 5/8 inch Keel Roller that Is Slightly to Large for Boat Trailer Shaft
I recently purchased 4 of the Yates YR-5213-5 keel rollers. The rollers that I replaced had a hard plastic sleeve. I just assumed the new rollers would come with the sleeves but they did not. I was able to remove the sleeves from 3 of the old...
Picking Out Wobble Roller Replacements for 1972 EX Loader Trailer
I need new rollers for my ancient 1972 EX Loader trailer. Would you magically happen to know what size rollers I need based on the model? ha, ha. It fits a 1972 Starcraft 18foot aluminum boat and I am guessing there are a total of 32 rollers...
How to Install the Yates Keel Pads on Your Trailer
do the scallops go up or down? | The scallops on the Yates Keel Pad # YR1203SB go down on the frame of the trailer so the boat sits on a smooth surface. I've attached a photo that shows these installed on a small trailer, but you will need frame...
Keel Roller to Replace 11-1/2 Inch Long and 4 Inch Diameter Keel Roller
Is there a 11.5inch long keel roller which is 4inch at its highest diameter outside edges? | Pretty close but we don't have a keel roller with those exact dimensions. The closest we have # YR12244-125EC that is 11-3/4 inches long by 3-3/4 inches...
Availability of Replacement Yates 343R Wobble Rollers
I have a 1998 Karavan trailer withYates 343R rollers. Can you reccommend a replacement for these? Thanks, | We have the Yates 343R wobble roller replacement you are looking for with the part # YR343R-6P which would work great for you. |
Ark Self-Aligning Boat Trailer Ezi-Guides # AR74FR Roller Lengths
Greetings. What is the roller height? looking for roller hight in the 24inch range Cant find it in your description. Thanks | The Ark Ezi-Guides Self-Aligning Boat Trailer Loading System # AR74FR has an overall length of 15" with both rollers...
Recommended Bell for 3" Roller On Boat Trailer
I have the 3 inch roller. Can I purchase just the bells/ | It sounds like you are looking to add bells to an existing 3" roller and if that is the case we do have options from Yates, part # YR325BLK for black, part # YR325B for blue, or part...
Bow Roller Recommendation for a Trailer with a 3-5/8 Inch Wide Bracket
Bracket at front of trailer is 3 5/8 wide. Right between sizes for your bow rollers - guess I need the three inch but that leaves quite a bit of gap, so wonder if I get the 4 inch model - which might not exactly measure 4 inches? Your help...
How to Determine Correct Replacement Wobble Rollers
I own a 1987 Shoreland’r trailer and it’s the first roller trailer I’ve owned and looking at my rollers I can’t figure out if this is how they’re supposed to look, or are these in need of replacing? They all look like this | Thank you for the...
How to Find the Right Replacement Wobble Roller for a 2006 Magic-Tilt Trailer
have an 06 magic-tilt trailer. Do your wobble rollers work as replacements on my 06? Thanks | There are only a few rollers that we carry that list specific trailers that they will fit. For everything else, you will need to go by the dimensions...
Recommended Replacement Wobble Roller Parts for Venture Boat Trailer
Hello, Great descriptions on your website, but I still need some help. Please see the attached picture. I have the missing roller and one washer, but need a new clip and the black rubber thing. The washers inside diameter is 1-1/8inch but...
What is the Largest Diameter 4 Inch Bow Roller for Boat Trailer Available
I am looking for an oversized bow roller 4in long but atleast 4.5in diameter. The one that us on the trailer now is about 3.5im diameter and the mounts are all welded in place and cant be moved. | Currently the CE Smith Bow Roller for Boat Trailers...
Replacement 8 Inch an 12 Inch Keel Rollers and Hardware for Boat Trailers
Boat Trailer 8inch Long Keel Roller by Dutton-Lainson Have 1 8in And 2 12in roller and they are all split and old Do you guys also sell the hardware to assemble onto the boat like the rod and caps | In order to replace the keel rollers...
Will the Yates Endcap for Side Guide Rollers - Heavy-Duty Rubber - 1/2" Shaft Leave Marks
does black end caps for side roller leave black marks on boat | The Yates Endcap for Side Guide Rollers part # YR224-4 can leave marks on the boat but we do have a non-marking option for you in the Yates Endcap for Boat Trailer Rollers part...
Roller Shaft Length Required For Yates 10 Keel Roller and Yates End Caps For Boat Trailer
What roller shaft length is needed for a Yates 10inch roller with two Yates end caps? | For the Yates Keel Roller # YR1000Y with the Yates Endcap # YR135-5Y on both sides you will need a 5/8" roller shaft. I recommend the Roller Shaft with...
Distance from Mounting Hole to Bottom of Yates Y-Style Bow Stop for Boat Trailers # YR4Y22-3
Im looking at your YR4Y22-3 2X2 What is the measurement from the bottom of the stop to the 3/8th hole? The bottom meaning. The bottom of the Y | Yates Y-Style Bow Stop for Boat Trailers # YR4Y22-3 measures approximately 1/2 inch from the...
Solution for a 5 inch Bow Roller Assembly
Do you have this type roller to be used with a 5 inch roller bracket? | I have a 5 inch roller, but the largest Bow Roller Assembly that we offer is a 4 inch, like part # YR450Y-400Y. The CE Smith Deep V Keel Roller Assembly # CE10401G is 5...
Is There a Bushing Inside the Yates Side Guide Roller for Boat Trailers # YR12243-4P
Do these rollers have a bushing inside to make easier spin of them when mounted on a roll pin? | The plastic bushing that is on the inside of the Yates Side Guide Roller for Boat Trailers # YR12243-4P is attached to the rest of the roller and...
Replacement for 11-1/4" Keel Roller with Shaft and End Caps
I have 10 keel rollers with 11 1/4 x 5/8 shafts on my boat trailer. Do I need longer shafts to add roller end caps? | The best size replacement keel roller we have is the Yates Keel Roller for Boat Trailers part # YR12000 for black, part # YR1200B...
Does the Yates Ribbed Wobble Roller Have a Weight Capacity
Is. This roller strong enough to hold a boat weighing 5000 pounds | Wobble rollers such as # YR530R-8P do not have a weight rating. Usually you use more than one roller so the weight of the boat would be distributed a little more amongst all...
Washer and Pin to Use with the CE Smith Wobble Roller YR440R
Hello, I think I may have these on my current trailer is there typicall any other hardware that goes with these? Washers cotter pins? I was going to re use the washers and pins on my trailer. DO you sell the washers if need be? Do you have a...
Weight Capacity of Yates Keel Roller
Yates Keel Roller for Boat Trailers - TPR - 8 Long - 5/8 Shaft Item # YR800Y. Any idea of weight capacity with a standard shaft? | Yates has told us in the past that their keel rollers like the part # YR800Y have a 400 lb weight capacity. |
Wobble Roller for EZ Loader Boat Trailers
Does your company sell parts for EZ loader boat trailers ? | We carry one wobble roller, # YR500YW-8PEZ, that is specifically found on EZ Loader Boat Trailers. It is possible that other replacement parts would fit but as far as manufacturers...
Options to Replace Calkins Double Roller Assembly on Boat Trailer
Hi I am looking for calkins boat trailer Double Roller assembly for my Keel and bow rollers. Cant find them online or any store and mfg is out of business. DO you guys know or have this part or something that can be used as a replacement? Thanks...
Filter Your Search
Contact and Help