Recommended 5th Wheel Install Kit for 70's Ford Pickup
Hello I have a 78 f150 that I need to mount a 20k fifth wheel hitch in I need the rails and mounting kit what do I need thk you | In order to mount a fifth wheel hitch on a 70's Ford Pickup you'll have to use a universal install kit, the Reese...
Would Redarc Smart Start Battery Isolator Kit Work on 1978 GMC K25 Truck
I am looking to install a battery isolator between my prime and auxiliary batteries on a 1978 GMC K25 truck. Given the truck is older, is this the right system for this older truck? The two batteries that I have are Interstate, with CCA 800....
Trailer Hitch Receiver For a 1978 Chevy K10 Which Allows Spare Tire To Be Mounted Under Bed
Hello I have a 1978 chevy k10. Looking for a trailer hitch that I would be able to use with the original spare tire setup under the bed. Thanks | The Curt Trailer Hitch Receiver # C14082 will allow you to keep the spare tire located under the...
Hidden Hitch for my 1978 Chevrolet C-10 that Will Fit Behind my License Plate
does curt make a hidden hitch for a 1978 c-10 to be hidden behind the license plate? | The Curt Trailer Hitch Receiver part # 13028 is the only available Curt Class 3 hitch for you 1978 C-10. It is designed to sit under the bumper. The other...
Distance from Mounting Surface to Hitch Opening for the B&W Trailer Hitch Receiver BWHDRH25198
Hello Do u have a measurement from the frame to the receiver box? I have a measurement of six inches on my truck. Thanks | Yes, check out the picture I attached that has the vertical distances from where the hitch mounts to the frame of the...
What Are the Bestop TrailMax II Pro Seats # B3945115 and # B3945015 Made of?
I’m interested in this passenger seat and a driver’s side matching seat. The description says “vinyl” but it also says “Black Denim.” Can’t figure out if it’s a vinyl seat or a denim seat. Any ideas? | The Bestop TrailMax II Pro - Vinyl...
Is There a Trailer Hitch Receiver Available For a 1978 Lincoln Continental Mark V?
Do you have a hitch for a 1978 Lincoln continental mark v. Will be pulling a two horse inline McQuery trailer with fix3d axle on the rear and front steering axle. Weight will be around 5k. | While we do not have a custom fit receiver you may...
Fitment of Solera Family Room for RV Awnings
My awning is 21. Center arm to center arm is 20.4'. Can I use a 20foot room? If I need a 21foot how much are they? | The Solera Family Room for RV Awnings, # LC362235 works with awnings that measure 20' from center of one arm to center of the...
What Tire Chains are Good on Ice and Will Fit Both 235/75-15 and 225/75/15 Tires
will these chains fit my 235x75x15 and 225x75x15 tires? | The Titan Chain Snow Tire Chains w/ Cams part # TC2819CAM that you referenced will fit your 235/75-15 tires but not your 225/75-15 tires. The reason for this is because the 235/75-15...
What gauge wire is recommended when installing Pollak 7 way trailer connector?
Hello I was wondering what is the biggest gauge power wire that can be ran for trailer 7 way PK12-707E | Here are the recommended wire gauges when installing the Pollak 7-Pole, RV Socket Vehicle End # PK12-707E: Ground - 10 gauge Electric Brake...
Are There U-Bolt Plates for 3" Diameter Axle and 2.25" Leaf Springs
i want a 3 inch trailer u bolt with plate kit but i have 2.25 inch wide leaf springs do you have anything that fits | The two most common size leaf spring sizes that will be used with a 3" diameter axle are 1-3/4" and 2". It's not common to...
Trailer Hitch Receiver & Wiring Harness For Towing a Tear Camper With 1978 Chevrolet Malibu Classic
I’m looking for a hitch to tow a small tear. Which one towing hitch will be recommended for 1978 Malibu classic? | You will need to have a receiver made for your 1978 Chevrolet Malibu Classic using a Curt Weld-On 2" Receiver # E17. This will...
Trailer Hitch Receiver For a 1978 Ford Bronco Custom XLT
Will this fit on a 1978 Ford Bronco Custom XLT ? | The Curt Trailer Hitch Receiver # 14001 is designed to fit your 1978 Ford Bronco Custom XLT as long as you have a standard or step bumper. It will not fit if you have a roll pan style bumper....
Why is There Only One Ground Wire on the Adapter 4-Pole to 7-Pole and 4-Pole Part # 37185
On part #37185 why is there no ground wire coming off of the Four flat connector that plugs into the existing 4 way? Is the single white wire the ground for both the 4 flat and 7 round? If so can i use the part #40105 T connector in my wiring...
Recommended Lock N Roll Articulating Hitch For Scamp Trailer
Hi: My 13 foot Scamp Trailer recently flipped onto its side behind my 78 Landcruiser. It isnt pretty and Im currently learning a little about fiberglass repairs! My question is, since the Scamp has a ball hitch receiver, will I have to have...
Does 4-Way Trailer Wiring Include Reverse Light Circuit
Having trouble with the 4 way hook up. I’m not getting reverse lights and I had ever light working but when I had the left signal light working the right also start blinking if I single the right it works correctly do I have the worg conector?...
Does 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e46SR Come with Bushings
Hello I have 2 questions about e46SR, does it come with bushing and what is the pro and con to having just 1 leaf rather then multiple? | The 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e46SR was designed to be used without bushings...
What is Difference Between Suspension Kit for Tandem-Axle Trailers and K71-359-00
Hello I was wondering what are the differences between AP233 and K71-359-00? Also what is the shackle thickness for ap233? | The Suspension Kit part # AP233 is more of a basic equalizer and shackle kit that uses standard thickness shackles....
Will the Furrion Vision S Wireless RV Backup Camera System Work With a Bluetooth Monitor
Hi do we have to have a separate monitor or will it come through on the screen in the pickup? Bluetooth? | The Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF is only compatible with the included monitor. It will not communicate...
Correct Westin Replacement Rear Bumper for 1978 Dodge Full Size Pickup
Will this fit a 1978 Dodge Pick up | The correct Westin Fey Diamondstep Rear Bumper for a 1978 Dodge Full Size Pickup is part # 20000-92230. This kit comes with both the rear bumper and the custom fit brackets you need to use to attach it. The...
Recommended Carr Tube Steps For 1978 Ford Van
Is it possible to just one of these? I need 3 total for a van. Thanks! | We have exactly what you are looking for. For the Carr Custom-Fit Side Steps, you will need part # CARR103991. This is a pair of the 7-inch steps. For the single step...
How Does Trailer Breakaway Battery Wire to Trailer with Aux Battery
Hello I have a trailer with a battery that I use for a 12k winch and I was wondering how do I wire up a breakaway kit with the already existing battery on the trailer | Basically you'll be wiring the 12 volt accessory circuit you have now that...
Windshield Cover That Will Fit A 1978 Dodge Tradesman Camper
Will this fit our camper windshield. A 1978 Dodge tradesman camper? | I like the classic camper van! I have something that will fit it check out the link below: **Adco RV Windshield Cover for Class C Motorhome - Vinyl - White # 290-2402. This...
Can K2 Snow Plow part # K2STOR8422 be Installed on Vehicle Travelling Public Roads
can this plow be mounted on my truck when traveling on public roads? | It's not illegal to have the K2 Snow Plow part # K2STOR8422 installed on your truck when traveling on public roads but you would need to be aware that your front license...
Filter Your Search
Contact and Help