Are There U-Bolt Plates for 3" Diameter Axle and 2.25" Leaf Springs
Updated 03/23/2022 | Published 03/21/2022
Question:
i want a 3 inch trailer u bolt with plate kit but i have 2.25 inch wide leaf springs do you have anything that fits
asked by: Charles L
Expert Reply:
The two most common size leaf spring sizes that will be used with a 3" diameter axle are 1-3/4" and 2". It's not common to use 2-1/4" and above as these springs are usually rated well beyond what a 3" diameter axle can support, usually around 7K. Therefore, if you have an odd setup like this on your trailer you'd need to construct your own tie plate using the MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles part # MR66ZR.
Product Page this Question was Asked From
MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Trailer Suspension Parts
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 1/2 Inch Diameter
- MORryde
more information >
Continue Researching
- Q&A: Does Roadmaster Make the Long U-Bolt Kit part # RM33KT
- Q&A: Wet Bolt Recommendation For the Roadmaster Comfort Ride Leaf Spring Suspension Kit
- Q&A: Disc Brake Kit Recommendation for 2022 Grand Design Reflection 337RLS
- Q&A: Longer U-Bolts For 3 Axles For Roadmaster Roadmaster Comfort Ride
- Q&A: Can I Use a 8K Roadmaster Comfort Ride Kit on a Trailer w/ 7K Axles?
- Q&A: What is Needed to Install 8k Roadmaster Comfort Ride System on 7k 3 inch Axles
- Q&A: Longer U-Bolts for Installation of Roadmaster Comfort Ride Leaf Spring Suspension Kit
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Measure a Trailer Axle
- Article: Best Air Bag Suspension 2025
- Article: How to Tell the Weight Rating of a Trailer Axle