Recommended Trailer Hitch for 1985 Chevy C20 That Works With Rear Spare Tire
Hello, I am looking for a receiver hitch and bumper for my 1985 Chevy c20 Stepside, 8ft bed. I want to be able to keep my spare tire mounted under the bed as well, my last hitch wouldnt allow that. Might you have the correct items? Thanks,...
5th Wheel Trailer Hitch Custom Install Kit for 1993 Chevy K3500 Without Drilling
Will this kit work on a 1993 Chevrolet K3500 with 6.5 turbo diesel? No drilling on the frame? | The # HT31412 Husky bracket kit fits specific Ford Super Duty trucks from 2005 to 2010 but not your 1993 Chevy K3500. The Husky kit for your truck...
Which Hitch Fits 1994 GMC 3500 with Roll Pan Rear Bumper
Hello, Which receiver will fit on my 94 gmc dually crew cab with roll pan? Drilling required? | For your 1994 GMC 3500 with a roll pan bumper we have the Curt hitch part # 13942 as a confirmed fit. This fits without drilling as well. |
Transmission Cooler Recommendation for a 1998 Chevy K1500 Series Truck
just wondering if my stock trans cooler is better than a aftermarket one | Factory transmission coolers are adequate at best at keeping the transmission fluid within the optimum 160 to 200 degrees F range. Adding a supplemental cooler is a good...
What Is Your Longest 2-1/2 Receiver Tube For Hitch Fabrication?
Do you have any of these 2 1/2” receivers 24” and longer | The Buyers Products Plain Receiver Tube # 337RT255818 is 18" and the longest 2-1/2" receiver tube that we offer. |
Recommended U-Bolt Mounting Hardware for 3,500 lb Axles
I need new u bolts for my trailer axels that are 2.5 inches round | It sounds like you have 3,500 lb axles that are typically 2-3/8 inch diameter and could easily be rounded up to 2.5 inches. For your U-bolts, I recommend the CE Smith U-Bolt...
Does Trailer Hitch for 1975 Chevy C/K Series Pickup Bolt On
Front mount. I was wondering if this unit would bolt to the front frame so I could install a hitch to put a generator on | The Curt Trailer Hitch Receiver # 13028 does bolt onto your 1975 Chevy C/K Series Pickup, but it is a rear-mounted trailer...
Hidden Hitch for my 1978 Chevrolet C-10 that Will Fit Behind my License Plate
does curt make a hidden hitch for a 1978 c-10 to be hidden behind the license plate? | The Curt Trailer Hitch Receiver part # 13028 is the only available Curt Class 3 hitch for you 1978 C-10. It is designed to sit under the bumper. The other...
How to Add 7 Way to 1998 Chevy Truck with 5 Way Plug
Hi: I have two trucks. 2018 Chevy Silverado 7 round that connects to my 2021 Rpod RV 7 round. This is the main towing vehicle and the setup works fine. The other truck is a 1998 Chevy Silverado that has a 5 flat that towed a boat, that I...
B&W Gooseneck Hitch For 1998 Chevrolet C/K 3500 Extended Cab Dually 8 Foot Bed
I am looking at the BandW gooseneck hitch # GNRC909 and need to now what installation kit i need for a 1998 chevrolet 3500 extended cab dually? | The appropriate kit for your 1998 Chevrolet C/K 3500 Extended Cab Dually with the 8 Foot bed is...
Recommended Trailer Brake Controller And Wiring Needed To Install On a 1996 Chevrolet Silverado 1500
Will it work on my 96 Chevy Silverado 1500 | The Pigtail Harness # 7894 will allow you to wire in your Draw-Tite Activator brake controller on your 1996 Chevrolet Silverado 1500. You will need a Universal Installation Kit for Trailer Brake Controller...
Recommended Trailer Hitch for 1976 Chevy C/K Series Pickup with Drop Receiver
Is there a hitch with the same mounting dimensions as the 13028 except with 71/2inch ? | It looks like you have a 1976 Chevrolet C/K Series Pickup and need a trailer hitch with drop receiver to clear something such as a deep drop bumper. If...
Will the Curt Trailer Hitch Receiver Part # C15325 Fit a 1999 Chevrolet K3500 Dually with Spare Tire
I have a 99 Chevy 4 door, short box, dually that I would like a class 5 hitch with 2x2 receiver stock replacement. Will a Curt #15325 allow for my spare tire to remain in stock location? Can you give me the measurement from the center of most...
Correct Air Bags for a 1994 Chevrolet C/K Series 1500
will these air lift bags work on a 94 chev 1500 extended cab 6.5 ft bed 1/2 ton? | Yes, I checked with Air Lift and the Air Lift LoadLifter 5000 Air Helper Springs part # AL57216 are listed as a fit for a 1994 Chevrolet C/K Series 1500 (All...
How To Add In-Bed Gooseneck Wiring To a Chevrolet C/K Series
i have this connector install in my 1994 silverado. I want to get a goose neck hitch for my truck and put another 7 pin connector in the bed of my truck. Im wondering how I would hook up the wiring so that i will have a 7 pin connector in...
Troubleshooting Brake Output and 12V Power Not Working at 7-Way on 1993 Chevy 3500
Trying to get trailer breaks and Ax power to trailer plug. I have traced down the problem with trailer break wire blue need new break controller i have power going in with nothing coming out. My question was I have a 3 way connection think is...
What B and W Gooseneck Hitch Would Fit 1996 Chevy 2500 Extra Cab
Will a BandW hitch out of a 2004 dodge 3500 extra cab fit in my 1996 Chevy 2500 extra cab | Gooseneck hitch fits are very specific so one that fit a Dodge truck would not fit your 1996 Chevy C/K 2500. Instead you'd need a new hitch like the...
Replacement Tarp for TruXedo TruXport on 1994 Chevy C/K Series Pickup with 8' Bed
Looking for a replacement to fit a 8 ft. Bed on 94 Chevy | If you have the TruXedo TruXport # TX241601 on your 1994 Chevy C/K with the 8' bed then the replacement tarp is part # TX2416-CVR. If you have a different tonneau cover then I'd need...
Needing Base Rails for a 5th Wheel Hitch to Fit a 1994 Chevrolet C/K Series Truck
I purchased a 94 Chevy C2500 long bed pickup. The previous owner used a 5th wheel hitch. But I received none of the hitch equipment, but I do have a Reese 5th wheel hitch. Now I need to purchase hitch rails that will line up with the four holes...
Recommended Trailer Hitch Receiver For 1990 Chevy C2500 Short Bed With Ranch Hand Bumper
Hi, I have a 1990 Chevrolet c2500 short bed and it has an old school ranch hand bumper with a plate on it, I believe its 10inch , do yall have any reciver hitches that would work with that bumper? Thank you | For your 1990 Chevy C2500 with...
Class IV Trailer Hitch that Fits 1971 Chevy C20 Truck with Standard Bumper
Hello I am looking for a CURT trailer hitch for my Chevrolet C20 1971 with standard bumper. Can you recommend me a trailer hitch class 4 for my car that will fit? Thank you | For your 1971 Chevy C20 with a standard bumper the Curt Class...
Gooseneck Hitch Plate that Curt Gooseneck Rail Kit # C31301 Fits
Can this work with the curt 61100 fixed ball | The most similar gooseneck plate that the Curt rail kit part # C61301 that you referenced is designed to fit is the Curt Gooseneck Plate part # C65500. The part number # C61100 would not fit this...
Does Bed Need to Lift Up to Install Draw Tite Gooseneck part # 8339-4440
I have a 95 Chevy 2500 diesel 4WD Cheyenne single cab with 8foot bed . I plan to install this myself. Truck used to have a gooseneck hitch installed which was removed to accommodate a bed camper. There are already holes drilled in the bed. Looks...
Should Bike Adapter Bar Be Used for Yakima OnRamp and Aventon Level E-Bikes
We bought the Yakima 2 bike on ramp carrier from e-trailer. We have one step through and one step over Aventon Level in 2 different heights. The clamps will not fit on the frame so we have attach them to the seat post. Very unstable. Would the...
Filter Your Search
Contact and Help