Are There Any No Drill Custom Installation Brackets for Curt 5th Wheel Hitch C16130
Hi I am looking at you Curt 20K 5th wheel hitch. It looks like it comes with a universal install kit. Do you have a vehicle specific install kit. I dont want to do any drilling. I have a 2008 Ford 350 dually with an 8foot bed. Thanks for you...
Troubleshooting No 12V Power on 7-way Wiring on 2000 Ford F-350
What need to do get 12v working. No 12v on my plug ford 2000 f350 just added fifth wheel wiring kit | If the 12V power circuit on your original bumper-mounted 7-way trailer socket on your F-350 worked before you installed the 5th wheel harness...
Parts Needed to Upgrade the Dacromet Calipers of # K2HR526D to Stainless Steel Calipers
I have a set of 12inch Kodiac disc brakes K2HR526D. Im planning on replacing the calipers KDBC225DAC with stainless steel calipers. KDBC225S. Since the original brake kit was designed for regular calipers is there an issue? For instance do I...
Recommendation for Weight Distribution for 2009 Ford F-250 Super Duty Towing Horse Trailer
Hi there. Im pulling a horse trailer as well as carrying a Lance Camper. The truck does pretty well, but it does sag a bit. Can you make a recommendation as to what I might install for stability? Thank you | The Timbren Rear Suspension...
What is the Difference Between the Ultra-Fab Stabilizer Jacks # UF48-979002 and # UF48-97006
Are these two identical, with the exception that UF48-979002 with the handle? If so, isnt it cheaper to buy the handle separately? Also, my 5er when level sits 20inch off the ground. Are these jacks the best length? Ill be using a block/pad...
Is There a Timbren Front End Suspension Enhancement for the 2018 Nissan Titan xD
Can we get front timbrens only ...??? | Yes. There are Timbren SES available for the front axle of your 2018 Nissan Titan xD using part # TFXF1004A. This Timbren kit is designed for Nissan Titan xD's with heavy off-road front bumpers or snow...
Options for Correcting Sag on 2010 Ford F-350 Hauling 48 FT Haulmark Gooseneck Trailer
I have a 2010 Ford F-350 DRW Crew Cab 4x4 that I haul a 48ft Haulmark enclosed gooseneck trailer. My question is when hooked up my rear axle weight is is anywhere from 8,000-8,900lbs and all though ive never measured it ive noticed that my...
Recommended Weight Distribution System With Sway Control For 33-Ft Heartland Travel Trailer
question about a load leveling hitch. I have a 2015 Ford F-250 and just purchased a 33foot heartland wilderness travel trailer with dry weight of 6780 lb I told them i have been researching the load hitches and I wanted the good Equlizer hitch...
Front Axle Suspension Kit to Reduce Impact on Factory Jounce Spring on 2014 Ford F-250
I have a Ford F 250 2014 4 wheel drive I do not have equipment on the front I do pull about 5000 pounds on the back I am installing Firestone ride-rite on the back I Drive over speed bumps to leave and come home every day I want to install these...
Trailer Hitch Receiver Compatible with 2018 Nissan Titan XD without Factory Hitch
Can you please tell me what trailer hitch will fit my 2019 Nissan Titan XD. Thank you. It does not have a factory hitch. | For your 2019 Nissan Titan XD without the factory hitch the Curt Class III Receiver Hitch # C13317 will work perfectly....
Long Ball Mount to Gain Clearance Between Trailer Jack and Tow Vehicles Lift Gate
I have a funmover motorhome which is a toyhauler with a lift gate on the back. The problem is when hitched to a trailer the trailer jack is very close to the lift gate. I have part # C45900. It would be nice to be able to have the ball about...
Can This Unit Be Installed With An Auxiliary Switch To Function When Truck Is Off?
Can the unit be left on between power cycles such that I can turn it on via an aux switch on my dash, instead of flipping the switch on the unit itself? | The Performance Tool 12-Volt Heater and Defroster can be left on between power cycles...
Custom Fifth Wheel Install Kit Recommendation for a 2008 Ford F-250
will the reese rail kit rp50073-58 fit on my 2008 f250 super duty with short bed | I have a similar custom fifth wheel rail kit that has been confirmed to fit your 2008 Ford F-250, but the part # RP50026-58 fits newer Ford trucks than yours...
7-Way and 4-Way Combo Recommendation for a 1999 Ford F-250 with 4-Way
99 F250 Super Duty- I want to use something like Part #:HM40975 but need a wiring harness like Part #:118243 that will plug in without splicing wires. Dont see a part that fits my needs... | It sounds like your 1999 Ford F-250 has a factory...
Base Dimensions and Mounting Hole Spacing for Quick Fist Super Clamp # QF20020
What are the outside dimensions length and width and hole spacing on the base of this large Quick fist holder? Looking forward to hearing back from you. Thank you so much for your time. | The base on the Quick Fist Super Clamp # QF20020 is...
What is Needed to Install the Hopkins Smart Hitch Backup Camera and Hitch Aligner System
I am interested in Hopkins Smart Hitch Backup Camera and am wondering if there is any thing more I need to install this in a 2012 f350 super duty truck? | The Hopkins Smart Hitch Backup Camera and Hitch Aligner System part # HM50002 comes with...
Rear View Backup Camera Compatible With Ford Rear View Mirror Plugs
Hi I was wondering if you could suggest a good backup camera I have a 2016 ford f250 xlt crew cab it has the self dimming mirror is there a kit with camera and a mirror I can buy like a plug and play Im sure theres pig tails on the wire harness...
Mounting Hole Spacing on Chrome Grab Handle # GH12-713
What is all the hole spacing on GH12-713 grab handle? | The hole spacing on the Steel with Chrome Finish Grab Handle, # GH12-713, is 10 inches center to center on the inner holes and 12 inches center to center for the outer holes. I have included...
Which Way Should the Kingpin Coupler Block Face on the Andersen Ultimate Part # AM3200
I have a Ford SD swb, should the block be facing forward or back?wards | The orientation of the kingpin coupler block that comes with the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter part # AM3200 will depend on which...
Disc Brake Kit Availability Compatible with the Dexstar Conventional Steel Wheel # AM20766
I am looking for a rotor/caliper combination that works with the AM20766 wheel. What truck or trailer disc brake setup works with this wheel? | The Dexstar Conventional Steel Wheel # AM20766 has an 8 on 6-1/2 inch bolt pattern. To see a list...
Trailer Rim and ST215/75R14 Taskmaster Tire Recommendation
I am in search of a couple of spares... I need to know if I can deviate on one of them. I would really like to get a Taskmaster ST215/75R14 LR C on a silver mod rim 5 on 4 1/2 bolt pattern. Your site only shows white.... | Check out the Provider...
7-Way Trailer Wiring Recommendation for a 1999 Ford F-250
your part number 20119 is supposed to fit a 1999 ford f250. the plug that connects to the oem harness does not at all look the same in the video as the original. mine is square wit rounded corners and has different sizes and lenght pins in it....
Can Trailer Tire Size 205/75-15 be Replaced with 225/75-15
Have 205/75 15 on camper can I go to 225/75/15 ?Wonder about width. | When trying to upgrade to different sized tires, you will need to be aware of both width and height clearances between the new tire size and your trailer. A trailer tire...
Best Camco Wave Heater for a Trailer with 234 Square Feet of Space to Heat
Hi I have a 2017 Rockwood Forest River ultra lite 2440WS. It is 27 feet long with 2 slides. The one in the bedroom is just a closet. I calculated 27 X 8 to get 216 Sq Ft and 6 X 3 for the dinning room slid to get 18 for a total of 234 Sq Ft....
Filter Your Search
Contact and Help