Part Needed to Convert 1999 Ford F-350 Trailer Wiring From 6-Pole to 7-Way RV Blade Type Socket
I have a 97 Cardinal 5th wheel and 99 f350 dually. The truck currently has a 6 pole socket mounted in bed.as pictured. What part do I need to replace this socket to 7 pole flat to plug in my 5th wheelplug? And what is the process? | You can...
Washer/Sealant for Baggage Door Lock Cylinders
Can you get the seal on the outside separate? | The washer is not available but since you won't be taking this on and off, you can use some Loctite # LT37467 black gasket maker silicone to seal around that lock. This is also good for that black...
Is a 2018 Toyota Sienna Factory Wired for Trailer Wiring Harness and Converter?
Does 2018 Toyota Sienna XLE already have the power wire for wiring converter box or does it need to be run? | For your 2018 Toyota Sienna, the factory wiring harness at the tail lights is the extent of the wiring for trailer connections. This...
Availability of Replacement Hardware for Thule 250 Combibox
I have an old Thule 250 rooftop cargo box. Hasn’t been used for 20 years. The hardware doesn’t accommodate the 3” width of current roof racks. Which hardware would work? I have some holes 5” apart already drilled into the carrier | We do...
Is Sealant Required to Install Sealed, Mini LED Marker, Clearance Light # MCL-13CA2B
What kind of sealant should I use when installing these clearance lights on the side of an aluminum skinned cargo trailer? Is the foam gasket sufficient? Here is an existing one from the factory, and I plan to add 6 more. Thanks | The light...
What Type of Silicon is Needed for Draw-Tite Hitch On 2020 Subaru Outback
what kind of Silicone is needed for the installation? anything I can get from Lowes? | I recommend using the Loctite RTV 598 High-Performance Silicone Gasket Maker part # LT37467 in order to install the Draw-Tite Max-Frame Trailer Hitch Receiver...
Recommended Installation Method for Erickson E-Track in Enclosed Trailer
Im trying to find a permanent way to mount the track in this truck. We have tried self tapping bolts, but those popped out eventually as my coworkers over tighten straps a bit. Im including pictures of what Im dealing with. | Thanks for the...
Attaching Safety Cables to the Blue Ox Base Plate Kit Part # BX3824 2006 Volkswagen New Beetle
Using Blue Ox Base Plate BX 3824 and BX 4330 bar, where would safety cables be attached to VW? | There are two sets of safety cables that are required by law for all flat-towing application. There are what is referred to as short and long safety...
Trailer Wiring Harness Recommendation for a 2022 Kia Telluride
I already installed the hitch e45ZR on my 22 Telluride for my bike rack but now I'm needing to add some wiring so that I can do some towing. What kit do I use? Is the one from Stealth what I need? | Thank you for the purchase of the etrailer...
Recommended Complete Flat Tow System for 2017 Jeep Wrangler Unlimited
The cost of everything | For your 2017 Jeep Wrangler Unlimited, I recommend starting with the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-521448-4. This kit has removable arms to give you a very clean look when not flat towing...
What Vehicles Does the KSource Replacement Interior Mirror Fit
Will this mirror fit my car? | The KSource Replacement Interior Mirror part # DN080 comes with a metal insert that will be glued to the windshield using the Loctite Rearview Mirror Adhesive part # LT37438. Therefore, it will fit any vehicle....
Center to Center Spacing of the Car Top Kit U-Bolt for Older Yakima Cargo Box
What is the center-to-center spacing on the u-bolts for this ? Im trying to match the 2inch hole spacing on an old Yakima box and fit it to new wing-shaped factory cross-rails on a 2016 Toyota 4-Runner. It looks like the Rhino-Rack #S280...
How Should the 15K Truck and Trailer Winch # E52801 be Mounted to A Trailer
How do I mount E52601 to car trailer? Is it made to mount to the trailer bed? It looks like it should be mounted bolted to metal frame some how. It looks like the actual winch part should be as close to the bed as possible. | You are correct,...
Recommended Solution to Mount SportRack Vista XL Cargo Box on 2009 Subaru Forrester Factory Bars
I have a 2009 Subaru Forester with factory roof cross-bars. I recently purchased a SportRack Vista Cargo Box SR7018. The mounting holes of the cargo box line up with the outer, thick portions of the cross-bars. As such, the standard U-Bolts...
Recommended Trailer Hitch and Wiring for a 2021 Toyota RAV4
What hitch and wiring connector do I need to install on my 2021 RAV4? Does it make a difference if I have a hybrid because I do. I'm planning on using the Yakima exo swing away single cargo box and install that wiring kit for the rear lights...
Trailer Wiring Harness Recommendation for 2022 Kia Seltos
I already have the Curt hitch C65FR on my 2022 Kia Seltos but now I'm wanting to add some wiring so I can pug in the lights on my cargo carrier. What wiring kit do you recommend? Should I go with Curt since I have their hitch? | I would be happy...
Mounting Buyers Products Utility Storage Box to Cargo Carrier
How would you recommend attaching to a hitch mounted cargo carrier? Drilling holes with washers or a larger steel plate in the bottom of the cargo box? | If you want to secure your # 3371712250 to your hitch mounted cargo carrier my first recommendation...
Troubleshooting Rubber Pads Of B&W Biker Bar Coming Unglued From Metal Bar
The bar was tight on the frame but the rubber pads came unglued during transport. What glue do you recommend for regluing so this wont happen again? | With the pads coming unglued on your Replacement Bar for B&W Biker Bar Motorcycle Tie-Down...
Replacement Crossbar Hardware for Yakima Y01151 OverHaul HD Truck Bed Ladder Rack
One of the screws that holds the cross bar to the tower on one side fell out. Can you order replacement screws to secure the crossbars to the towers? | Although Yakima doesn't offer the M8 x 18mm security Hex Screw as a separate item, they do...
Replacement Mounting Hardware for Yakima RocketBox with 2 Inch on Center U-Bolts
I have a Yakima Rocket Box I purchased in 1999. I need four replacement u-bolts. Center to center dimension is 2 inches. The height is also 2 inches. Can you help me? Thanks! | For your old rocket box, you most likely want the U-bolt Kit...
Using Anti-Seize Compound on Trailer Hitch Mounting Bolts
Do you recommend using anti-seize on the trailer hitch mounting bolts? | Using anti-seize compound on the hitch mounting bolts is not necessary. Because of the lubricant properties, you'd need to lower the torque specs in order to not over tighten...
Is Sealant Required for the Replacement Rubber Grommet for RV Black Water Tanks
Hi. Ive read conflicting opinions on applying a sealant to the groove where the grommet sandwiches the tank wall. Is using a sealant advisable? Thank you! | In order to help prevent leaking between the grommet and tank on the Replacement...
How to install a 7-Way With a 4-Way Connector and a Brake Controller on a 2017 Toyota Highlander
I just bought a new 2017 Highlander with a tow package and wiring for a 4-way connector. Am looking to convert the 4-way to both 4-way and 7-way with a decent brake controller as well. What would be my best option with parts that you carry? Thank...
Parts Needed to Flat Tow 2020 Lincoln Nautilus
Thinking about buying a 2020 Nautilus 2.7L. What would I need in the way of wiring in order to flat tow behind a motorhome? Waiting for your response | There are a number of parts needed to flat tow your 2020 Lincoln Nautilus 2.7L V6 engine...
Filter Your Search
Contact and Help