Does the Ground Need To Be Re-Done When Installing a New Trailer Connector
Im wiring a tow harness but after wiring and plugging into existing connection it acts as if my ground is not doing its job. Do I need to ground it to the frame or should it be grounded through the existing connections. The vehicle is a 95 f250...
Will the B and W Hitch part # BWHDRH25198 Fit a 1996 Ford F-350 with a Deep Drop Bumper
Included is a picture of my truck the black one. Recently my hitch broke from a stress fracture and I need to replace it. Local accessories shop said they couldnt get a hitch for my truck because of the bumper. Will the BandW class 5 fit my...
Fit of Stromberg Carlson VG-100 5th Wheel Tailgate on 1996 Ford F-350
is this model a direct fit on a 1996 F-350 7.3 | According to the folks at Stromberg Carlson, their # VG-100 5th wheel tailgate is fit for the following Ford trucks: • 1987 - 1991 Ford F-150, F-250, F-350 • 1992 - 1996 Ford F-250 and F-350 •...
Can Gooseneck Hitch And Fifth Wheel Adapter Work For 1995 Ford F-350 Flat Bed Truck
i have a 1995 f350 flat bed the hight of the flat bed is 48in to the top of the bed. is it possible to mount a fithwheel htch and goose neck hitch to a truck that high? thanks: | You are going to want to take a couple of measurements to see...
Replacement Parts for Towing Mirror on 1995 Ford F250
I have a 95 F 250 with extend a mirrors. The Plastic? bracket connecting and allowing the slide for extension has broken. Can I locate one of these or is my only option to replace the entire mirror other than bolting the slide arm to the frame...
Do you Have the Replacement Hook Side for a Truxedo Deuce on a 1994 F350 8-Foot Bed?
I have the Truxedo Duece on my 1994 F350 long box 8 foot. I am looking for the replacement hook side. Can you help? | I went ahead and called TruXedo, and they said that the part you are looking for is the Replacement Velcro Shur-Bond Fastener...
Rear Suspension Helper Springs for a 1996 Ford F-350 Dually 2-Wheel Drive w/B&W Gooseneck Hitch
Hi there, I have the B and W turnover gooseneck hitch attached to my truck. I have been told that air bag suspension helpers will greatly help keep my truck from sagging. Question I have is that I have been told that air bags are not available...
Can Carr CARR210111 Light Bar Rotate So Light Bar Points Rearward
Does this bar rotate 180 degrees? So lets say, does it pint forward and then is it capable of rotating and have it facing backwards? If not I would have to by 2 mounts and another bar. | According to the fine folks at Carr, the # CARR210111...
Recommended Trailer Hitch for Ambulance on Ford Chassis
I have an ambulance built on a 1992 F-350 chassis. I need at least 6 inches of from the bottom of my frame to the top of the receiver. It looks like the other dimensions work. Does this hitch fit my needs? If not, is there another one that...
Can the Demco Hijacker SL Series 5th Wheel Trailer Hitch be Used on a 1996 Ford F-250 Long Bed
I have a DM6076SL-16K hitch and am wondering if I can use it in my 1996 Ford f250 with the 8 foot bed, because I know that hitch, and rail kit are listed for the 6 1/2 foot bed. | While the Demco Hijacker SL Series 5th Wheel Trailer Hitch w/...
Trailer Hitch Recommendation for a 1996 Ford F-250 that Allows Spare Tire to Be Kept
looking for hitch that allows me to continue using the spare tire carrier. what do you recommend? | The Draw Tite Hitch part # 75038 has been confirmed as a fit for your 1996 Ford F-250 and will allow you to keep your spare tire mounted underneath...
Brake Controller Install Harness Recommendation for a 1996 Ford F-350
I have a 1996 Ford F350 Super Duty with 7 way plug. It has a voyager XP controller is this the correct unit | The correct brake controller install harness for a 1996 Ford F-350 to install the older version of the Tekonsha Voyager # 39510 that...
B&W Turnover Ball Installation Kit For a 1994 Ford F-250
Will this rail kit fit this truck? 1994 Ford F250 2wd 8ft bed 7.3 diesel We already have the hitch plate and would like to install into this truck. We bought the set-up used and the rail kit that came with the hitch is for a newer Ford and will...
Parts Needed to Install Prodigy P3 Trailer Brake Controller 90195 in 1993 Ford F-350
I am interested in the prodigy 3, It would be installed on a 1993 Ford F-350 - 7.3 non turbo Diesel. It is equipped with a factory brake control 4 pin wiring connection under the dash, After reviewing your available wiring adapters it appears...
How To Install A 7-Way Trailer Connector On a 1997 Ford F-350
I need to install a 7 blade trailer hookup on this truck so can have brakes and all the other necessary wiring. Is there a quick plug for tapping into truck wiring or do I have to cut and splice. Hoping for easy clean solution | The process...
Parts Needed to Install Brake Controller In 1993 Ford F-350 with Factory 7-Way
I have a 1993 Ford F350 pickup. The truck is setup to haul with 7 pin and 4 pin trailer connections. I want to buy and install a trailer brake controller. I cannot find a hook in under the dash. How would the trailer brake controller hook...
Cable For Fulton High-Performance 2-Speed Trailer Winch F142400
Does the Fulton High-Performance 2-Speed Trailer Winch - Rope Only - Zinc - 2,000 lbs come with the cable? | We have the correct cable, but it does come separately from the Fulton High-Performance 2-Speed Trailer Winch # F142400. The correct...
How To Install a Pro Series 15K 5th Wheel Hitch on a 1996 Ford F-250
I have a Pro Series 15000 Head and need to mount it to a 1996 Ford F-250 8foot bed. Should I get the Universal Kit or is there one specific to this vehicle. | In order to install the Pro Series 15K 5th Wheel Hitch that you have now on your 1996...
Parts Needed to Flat Tow a 1996 Ford F-350 7.3 Behind an RV
i need a setup for a 1996 f350 7.3 i am a return customer | Welcome back! There are no confirmed custom base plate fits for the 1996 Ford F-350 trucks so in order to flat tow it you would need to have Blue Ox universal base plates # BX88266...
Adding a Fan to the Vent of a Lance Truck Camper
my older Lance truck camper has a vent only. If I want to install a fan vent, can I Tie into the wiring from the bathroom light? Thank you | Yes, you can tie into the wiring from the bathroom light to install a fan for your vent. This vent...
Parts Needed to Add 7-Way to 1996 Ford F-250
1996 F250 PSD XLT LONG BED, 4X4, A/T. Had a lot of work done on this vehicle. Vehicle originally was tow-ready, with a 7-blade flapped connector on rear bumper. During work, the connector from the two plugs on the drivers side, containing...
Is The Curt Wiring Adapter Compatible w/ Hayes Energize III Trailer Brake Controller For 1996 F-350?
Will this adapter work on my Hayes energize 3 control that has the plug on the back to connect to my 1996 Ford F350 factory port? | The Curt Wiring Adapter # C51322 is compatible with the Hayes Energize III+ Trailer Brake Controller # HA81742B....
Can Curt Assure Brake Controller Install in 1992 Ford F-350
Does this work om a 1992 ford f350 | Yes, the Curt Assure brake controller part # C49UR can work on your 1992 Ford F-350. All you need is the correct install harness part # C51312 which plugs in under the truck dash. |
Does The Curt Double Lock 5TH Wheel Hitch Fit a Frame 37-1/4" Wide on a 1996 Ford F-250?
I have a 1996 F250 long bed 7.3L diesel Extended cab In the ad it says it does not fit 34” frames Is that the inside or outside dimensions? The inside frame dimension of my F250 is 34” outside dimension 37 1/4” Will this kit fit my truck? Thank...
Filter Your Search
Contact and Help