!Liberty Travel Trailer  x   >   !GV70  x   >   !FR3 Motorhome  x   >   Polar Hardware  x   >  

Do you sell the bar that fits the door locking system? | You will need to go to a hardware to get a 3/4 inch inside diameter pipe to complete the installation of the Universal Cam-Door Lock for Enclosed Trailers, item # 383200. Some welding...

Looking for the mounting hardware for part PLR6618-. | The mounting hardware needed to install the Easy Grip Assist Handle part # PLR6618-A is not included with the handle and we currently do not offer it separately. The reason for this is because...

I need a continuous hinge 1-1/4x1-1/4 x 6foot with the knuckle about 1-3/4, do you have anything close. | The best option we have for you is the Continuous Stainless Steel Hinge part # SH300. This hinge is 6' long, 3" wide, and has 1" long knuckles....

I have a 2006 Carry-on 6x12 enclosed trailer. Is there a companies that has similar parts? Door hinges? | We do offer door hinges for enclosed trailers, in order to choose the correct one you'll need to note the type and measure its length....

I need hinges for the back door on my 1998 exiss maximum horse trailer they are broke. | We do offer replacement door hinges for horse trailers, in order to choose the correct one you'll need to note the type and measure its length. The T-Strap...

The kit 38320 has the handles that I need but I need the ones that the handle is welded to a hinge and you use two one on each side. do you have any like that. thanks | If you have a ramp style door that swings down and becomes a ramp what I...

Do you have a stainless with holes or can you drill them Do you sell screws with them also | I wish we had a hinge kit that had hole drilled in it already but none of the ones we offer do and we do not have any screw kits designed specifically...

What should be the proper spacing from the pipe to the part that the cam fits into at each of the ends? I am not using the system on a trailer, but on a heavy wood door and wish to compress a weather strip to seal the door. | When you install...

We are looking for a 84 inch rear cam lock for our trailer door. Unfortunately, not seeing any that are long enough. Curious if you make any that are 84. Inches or know where I could get one. Thank you | Based on your image it looks like you...

Picture below shows a garage/workshop I am building and I am making the workshop outside entrance from surplus siding and 1x4s inside and out to reinforce it. Photo below shows the first door I made yesterday. I am not going to put handles on...

BUILDING A BARN DOOR FOR MY DUMP TRAILER NEED TO KNOW WHAT HANDLE TO USE ON BARN DOORS ????? ALLREADY BOUGHT THE HINGES | For the barn door on your dump trailer, I recommend looking at the Cam-Action Lockable Door Latch Kit # 383200. This is...

Can I get this latch in black? | The Polar Hardware 55" Lock Side-Door Bar Lock Assembly # 3057-55 that you referenced is not currently available in black. This assembly, along with the other door lock parts from Polar Hardware, feature a rust-and...

whats the difference between the regular butterfly vent and the butterfly vents for polar roof ventilators besides pricing? do these vents rust? | The only differences between the vents is that part # PLR24-004 comes with a rubber gasket and...

Does the cam lock latch come with hardware? | I believe you are asking if the part # 158-102 comes with mounting hardware. It does not, you would need to provide the hardware needed to attach the latch to the door. |

What is the hole spacing? | There are 4 mounting holes on grab handle # PLR817-SS; 2 on each end. The holes on each end are spaced 1 inch apart on center. The top-most hole to the bottom most hole is 12 inches apart on center. And the other...

what is the length of the holes where the bar fits into the lock | The handle keeper for 55" Lock Side-Door Bar Lock Assembly # 3057-55 has mounting holes spaced 4 inches apart on center. The keeper itself can be positioned after the hinges...

Do trailer builders use just 1 6foot piano hinge on car trailer ramp doors if the door is 94inch wide? Or do they hinge the entire length? Maybe they use a heavier hinge? | The way a trailer ramp door is hinged is going to depend on how the...

I am looking for a small cam action lock, only 24inch vert, that is already welded up and ready to go. Do you sell? | The Polar Hardware Cam-Action Lockable Door Latch Kit w/ Narrow Hasp # 383200 is designed for smaller enclosed cargo trailers,...

Hello, I am customizing a cargo trailer with barn doors. I want to hang tools and equipment from the doors if possible and am wondering how much weight the hinges can handle and whether I should add extra hinges. | I reached out to Polar Hardware...

Can this vent be painted? | The Vent for Enclosed Trailers # PLR20 is zinc plated aluminum so you would need to pretreat the vent to remove the zinc coating to prevent the paint from peeling off as the zinc reacts with the paint's binder. |

What is the width of the mounting bracket? I have an awning and that is 2inch away from the door. | I went and measured the mounting bracket of the 55" Lock Side-Door Bar Lock Assembly # 3057-55 that you referenced and found that the actual...

Is there an inside component to this vent or only an outside piece? | The Vent for Enclosed Trailers # PLR20 would only mount on the outside of the trailer and would not have a piece to go inside of the trailer. I recommend using some butyl...

Does 158-102 come with the replacement mounting bolts and nuts, if not could you provide part numbers for those also. Thank You | It does not, you would need to provide the hardware needed to attach the latch to the door. You'd want to find...

Hey there I have a compartment door on the outside of my rv. The hinge was a thin metal piece and it broke. I can send a video for better reference. I just need the hinge replacement to screw the door into. | In order to find the correct replacement...