!Expedition  x   >   !Stallion  x   >   Ark  x   >  

where can I buy one? | When it comes to adding a dual wheel sidewind jack to your trailer I would recommend using The Removable Extreme Off-Road Swing-Up Trailer Jack - Dual Wheel - Sidewind - 10 inch Lift - 1,650 pounds # ARK57FR. We sell these...

I have the Ark extreme swing up jack is there a replacement handle available? | There is a replacement handle for the Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels part # ORJW750D with Replacement Jack Handle for Extreme Off-Road Trailer...

How much does each stabilizer jack weigh? | The Ark Drop Down Corner RV Stabilizer Jacks - 2-1/2' Long Corner Steadies item # AR94FR weigh 13 lbs a piece. |

What type of grease is recommended for the Ark Articulating Off Road Coupler? Should the 2inch ball on the receiver side be greased as well? As I am not familiar with any ball type hitches I have always used military style Pintle hitches any...

the vehicle info is not needed as the trailer is a homemade unit. My question is can this jack be fitted with a pair of pneumatic tires instead of the foot? I would like to have the trailer movable as needed and the wheels would be helpful....

do you have anything heavier for my 16foot dump trailer. what are these raited for ? thanks | I do have an option for you but drop down/swing down stabilizer jacks like part # AR94FR aren't really designed for dump trailers, in order to properly...

Need you opinion to cure movement in rear of trailer. I have a 5th wheel 2022 Columbus River Ranch 42 long. I have already installed a king pin stabilizer jack which has helped in the front but still get shaking in the rear. Looking at these,...

Hi etrailer, two questions about these stabilizers, want to ensure I understand the product. 1. Would you say these are an upgrade over a basic scissor jack that comes installed on a travel trailer? 2. Is it okay to use a socket and power drill...

Love the jack but the tire is a little chewed up. Are replacements available? | For your Removeable Extreme Off-Road Swing-Up Trailer Jack # ARK57FR the only replacement parts we offer are: -The Replacement Jack Handle for Extreme Off-Road...

Hi, do you have a ratcheting trailer jack that will work for a trailer that is used in saltwater on a frequent basis? It looks like it has a lot of moving parts with the knobs and everything so it seems like it would be very susceptible to any...

I bought mine through a private party. It turns out the springs are too stiff for the weight of my boat. These are for a 16 to 20 foot. I would like to buy the springs for a 10 to 16 foot and replace the ones on this. Do you sell just the springs...

What are the mounting bracket dimensions and hole centers of the mounting bracket? | The mounting plate on the ARK Removable Extreme Off-Road Swing-Up Trailer Jack # ARK57FR is 5-1/2" wide and 7-1/2" tall. It is designed with several bolt hole...

Looking for a pair of weld on down legs for the rear of my UTV trailer as not to have to hook it to me truck to get my machine on and off | We carry a few different weld-on camper jacks to help stabilize your trailer and allow you to easily...

Hey! I picked up a trailer recently that came with an ARK articulating coupler. I reached out to them about a lock that is compatible and they recommended I ask if you have any that you recommend. My plan otherwise is to just remove the coupler...

I have 13 foot Smokercraft Alaskan boat it probably weigh more than a lot of 14 foot boats, 20 hp suzuki motor batteries and with bow trolling motor. how much pressure does it take to push down the rollers? | The Ark Ezi-Guides Self-Aligning...

Will the AR48FR work as well on semi-v boats as v-bottom boats. | They sure will! The Ark Ezi-Guides Self-Aligning Boat Trailer Loading System - 20' to 28' Long Power Boat # AR84FR will work perfectly with a semi-v bottom boat, as the spring...

I have a car dolly and the plastic wheel on the jack sinks in soft surfaces and won’t roll over stone surfaces. The trailer is light with nothing on it but on those surfaces I have to lift the tongue shoulder high to move it which is hard in...

Without being able to look at the products first hand like I could in a store I wanted to see a good product for my jack on the front of my 21' ski boat. I have a new 1000 pound swivel C Clip jack on the front of the boat that didn't hold up...

Can I use a standard trailer dolly with a Lock N Roll hitch? | A standard trailer dolly like # RA20 is not directly compatible with the Lock N Roll hitch system. There is not a dolly designed to work with that system, however if you were to...

does anyone produce a slide in coupler on the trailer side for a regular 2inch coupler. | I have another option for you, but there is not a trailer coupler that already has a 2" receiver tube for installing an off-road coupler like the Ark Articulating...

2 questions about your Ezi-guides. 1 My cross bar a square tube 2.5 inches high, 3.5 inches wide. Thats over your 2.57 inches - will that be a problem? The 2nd question - according to your question/answer this will not work an an angled...

What is the Country of origin for the ARK87FR | The Ark XO Drop Down Corner RV Stabilizer Jacks # ARK87FR, along with all of the ARK brand products, are made in Australia. |

Want to make sure I can fit a Battle Born battery inside. The dimension for the battery is 12.75inch x 6.875inch x 9inch L x W x H | The interior measures 13 inches long x 7 inches wide x 9-3/8 inches high. Given the dimensions you provided,...

Does the Jack pivot both directions, basically meaning that it can pivot 180°? In other words, can it pivot to the left and to the right? This would allow it to be mounted in the same manner on both sides of the trailer. | It sounds like what...