!Eagle Super Lite Travel Trailer  x   >   Pavement Ends  x   >   SeeLeveL  x   >   GCH Automotive  x   >  

The pump switch is just another place to turn on/off the water pump. Or is there another reason for it? | Correct, the pump switch of the SeeLeveL RV Holding Tank Monitoring System # SE39VR provides an additional way to activate the water pump. |

The pump switch is just another place to turn on/off the water pump. Or is there another reason for it? | It is a 3-way switch. The SeeLeveL RV Holding Tank Monitoring System, # SE39VR includes a panel that incorporates readings for sensors...

how can i use the aux switches instead of the supplied toggle switch | The Custom Third Brake Light Camera # 3460002 uses the supplied toggle switch as a power input to signal the module for switching to the optional 3rd brake light camera....

Im looking to purchase this Custom Third Brake Light Camera System w/ Rear View Mirror - Night Vision - 4.3 Screen Item # 3460005. My concern is that I have a headache rack and I will not be able to see the bed because of the way the camera...

My camera was installed at a dealership. During colder weather, the camera is very distorted and doesnt have a clear picture and eventually says camera not available. No issues in regular weather, any thoughts? | The way the Custom Third Brake...

I have a 1998 jeep wrangler and the stock windows are stitched around the metal frame. How will this windows work for installation? | Since the current skins on your upper doors on your 1998 Jeep Wrangler are stitched around its frame you would...

Is it possible to buy just the rear window of a 1998 chevy tracker in black? If so how much would it be and what side does the zipper start on? | I wish I had something I could recommend for you, but we don't carry just the rear window of the...

Do I need this part of I just wanted to install the camera and only use it when in reverse. Dont really need to have the ability to view the camera anytime. 2012 Ram 2500 | I contacted GCH on your behalf and they confirmed for your application,...

What does the installation of this involve and what if any installation instructions are available/provided? | If you check out the second half of the review video I attached for the Truck Bed Cargo Camera for Factory Monitor # 3460015 you'll...

How would the camera be connected to a Kenwood DMX9706S. It has 3 camera inputs. I was wondering where would the camera get power from? My truck has the uplifter switches. So was wondering if I connect it to the battery would the image show...

Is there clearance to use a factory style tow hitch with this bumper, like 13432 | Yes, replacement rear bumper # PE4591101 has about the same height (6 inches) as the stock bumper on a 2015 Jeep Wrangler. This means you can install trailer...

Looking for a meter to tell how much water we have consumed in our RV. We are dry camping and need to conserve the water in our fresh tank. The sensors in the RV are simply 3 lights. I would love to have something that shows gallons consumed,...

I am looking to put in the replacement holding tank sensor system. I have a a 2022 Alliance RV Paradigm 5th wheel 35 ft. Which sensor system should I get? | This really depends on if your 2022 Alliance Paradigm has an RV-C, multiplex wiring...

Can you hook this to one of the auxiliary switches that come on an F250 instead of adding a separate switch? | Yes. There is no reason that you can't just use the upfitter switch in your Ford F-250 to connect the power of the Custom 3rd Brake...

2017 Ford F250 Super Duty Looking for a bluetooth capable RV backup camera that will work with my existing Samsung bluetooth capable or Microsofy Surface tablets. Camera will be used for two setups: used for rear facing bed view lookinch when...

will this product fit a 2021 Ram HD 2500 with 8.4 uConnect without Navigation | From what I could find, it looks like the OBD Flasher for Truck Bed Cargo Camera Kit # 3460019 will work with your 2021 Ram HD 2500 with 8.4 uConnect without Navigation....

I have a aftermarket tailgate camera that is hooked to a 4inch factory display via the control module behind the glove box. I would like to add a tail light camera. Could I Y the video and apply power to the red and hook the ground to a SPDT...

will this 3 light system work with the console monitor in my 2018 ram 2500 4x4 | Yes, the Truck Bed Cargo Camera for Factory Monitor - 3rd Brake Light # 3460015 that you referenced is confirmed as a fit for your 2018 Ram 2500 that has the console...

will camera FOS43TASF work on a 2019 Montana 3121rl 5th wheel , or is there one that might have 2 cameras ,one for back of camper and one you can put in bed while hooking up to trailer. I have a goose neck hitch? | The Furrion RV Observation...

could this be attached to the topper that I have? Can this be used remotely instead of the third brake light camera? I loved having the higher camera for putting my boat in the water but now with the topper, I have lost that view. | The GCH...

My 2022 F350 lariat has the auto dimming feature. There is a plug in the back of the mirror. Can this be used to power the mirror or does it need to be tucked out of the way? Will it cause any codes to come up if the factory mirror is disconnected?...

Installation instructions for this camera | I have attached a couple images below of the installation manual for the GCH Truck Bed Cargo Camera # 3460010 that you referenced. I have also included a full install video on the 2018 GMC Sierra that...

If I use this PE5681201 rain cover, what covers the door windows of my 2006 Wrangler with half doors? | Since your Jeep does not have windows and the cover, # PE5681201, does not have anything that comes down to cover the opening, there is nothing...

My camera in the tailgate is viewed in the rear view mirror, will this camera require an additional monitor? | I spoke with GCH Automotive and the Truck Bed Cargo Camera for Aftermarket Monitor part # 3460016 for the Ram trucks is designed to...