Free-Backing Drum Brakes for M101A2 Military Dump Trailer
Will these brakes fit? Im having a hard time finding info on replacement parts for this trailer. | To check the fit and compatibility for a set of replacement hydraulic drum brakes on your M101A military dump trailer you will want to match up...
Ladder Rack and Tonneau Cover for 2005 Nissan Titan
is there a tonneau cover that is compatible with the above in the subject? | I may have a solution for you, however because of how the Thule TracRac Universal Ladder Rack # TH91000 attaches over the bed rails of your Nissan Titan, there is not...
Lights for the Light Guard # LG440NP Mounting Bracket
HOW DOES IT LIGHT UP THE LICENSE PLATE AND SIDE MARKER. OR IS THERE ANOTHER PART # . THANKS | The Light Guard # LG440NP is actually made for the Peterson Square Lights # 432400 (Left Hand) and # 432200 (Right Hand). These lights come with...
Slipper Spring Trailer Suspension Hanger Spacing
what are the spacing of hangers? | There is not a fixed spacing for the hangers in kit # APT6SE-36 since this depends on the length of the particular springs used. The hangers need to be close enough together that the curved ends of the slipper...
Replacement Oil Caps for AL-KO 10,000 lb Axles
1989 TWI gooseneck trailer with AL-KO 10lb axles! Having trouble finding the right oil caps for these axles! Mine has very fine threads and it’s a deep cap! Outside says Quality Running gear Inc. on it ! | We have what you are seeking. It...
Is Grease Zerk Fitting on Redline Step Wet Bolt for 1-3/4" Double Eye Springs 34007-187-00 Threaded
wet bolt grease fitting does it thead in or press in | Redline Step Wet Bolt for 1-3/4" Double Eye Springs # 34007-187-00 is fitted with a threaded grease zerk; this is why the zerk fitting has wrench flats. I confirmed with my contact at Redline. |
Can the Redline Full Size Locking Steel Flush Door Latch be Ordered Keyed Alike
I need to know what the key code is for this latch and if I order more than 1 if they will be keyed the same? Thanks | The key code for the Full Size Locking Steel Flush Door Latch # L3980 is random and they don't all have the same code plus...
Installing Vent in 6x12 Enclosed Cargo Trailer To Keep Interior Cool When in Storage
I have a 6x12 enclosed cargo trailer with the typical manual roof vent. My trailer sits more than it is used and I need to keep the hot air out as much as possible while it is sitting not connected to power. | The # UF53-945001 solar-powered...
Horse Trailer Ramp Spring For Helping Lift Heavy Ramp
Hi, I just got my brand new 2020 Titan Horse Trailer. I paid good money to have a ramp installed but I can barely lift it up. I had a Bison trailer with ramp and it was awesome and I had no problem lifting. I asked how heavy the ramp was...
Where Does Replacement Buckle Ends # PARTS-356A0001 Install on BAKFlip Tonneau Cover
Is this the strip that attaches on the back end of the cover next to the rear window? if not do you have that strip that attaches to the back end of the cover close to the rear window? Also I need the weather stripping for between the bed rails...
Replacing 6-Leaf Springs on 12K Axles with 7-Leaf
I was wondering I can replace the 6 leaf spring on my 12k dexter axle trailer with a 7 leafs spring part # SP-270275? Both are 3 inch leaf spring. Also is it necessary to replace the U-bolt, if so what is part number for them? As per the measurement...
Matching Lug Nuts to Use with Wheel Stud # RG03-140
need 12 RG 03-140 plus 12 nuts | We have the part # RG03-140 you are looking for and then for lug nuts you'd want the # 6-109 and you'd be set. | Thanks Jameson . please confirm the dia. Of the splined/knurled area. Matter urgent | The spline...
Replacement Hub Needed for Dexter Axle 8-256
I need hub for my trailer detex 8-256 | Your Dexter Axle hub 8-256 should use an # L68149 inner bearing and an # L44649 outer bearing which means you have a #84 spindle and you'll use one of the following hubs: 5 on 4-1/2" - part # 84545BX 5...
Compatibility of Westlake Tires and Wheels for 1998 Stratos Bass Boat with Tandem Axle Trailer
I have a 1998 stratos 201 pro elite 20ft bass boat with a 200hp and tandem axle trailer would these have the weight capacity to work without any problems? | For your 1998 Stratos 201, the Westlake ST205/75R15 Radial Tire w 15" Lynx Aluminum...
Trouble Removing Lug Nuts on the Kenda Karrier S-Trail w/ 12" Aluminum Wheel # AM31215
Will this fit the AM31215? When mounted with lug nots in place there is very little space to fit a lug wrench in the recessed holes to change a tire. I have four or 5 tire wrenches at home and none of them will fit in the holes. | Thank you...
Recommended Removable Ladder Rack and Tonneau Cover for 2016 GMC Sierra 2500HD
Looking for a removable ladder rack and tonneau cover combo recommendations? | The ladder rack system that is easiest to remove from your truck is the TracRac SR which uses bed rail mount tracks that let you not only quickly remove the uprights...
How to Select 8-on-6-1/2 Hub Drums for Triple Axle Trailer
Looking at a trailer that has 3 dexter axles with the Dayton rims. What would it cost to do the conversion on all three axles? I was looking at the kits you have but couldn’t tell if it was a per axle kit or per wheel kit. 8 lug hub drum conversion....
Correct Hanger Spacing for the Tandem-Axle Trailer Hanger Kit Part # APT4
What is the hanger spacing required for this APT4 kit with 4 leaf 25 1/8 double eye springs? Part number on the springs e54SR. | The position of the axle should dictate the position of the springs and hangers not the other way around. With that...
Tonneau Cover Recommendation for 2018 Ford F-250 that TracRac SR Ladder Rack to Install
I have a 2018 F250 with a 6- 9inch bed. Can I install this rack with a Bakflip MX4? | There's really only one tonneau cover we can recommend with a TracRac sliding ladder rack like the part # TH43002XT-501 which is a fit for your 2018 Ford F-250...
Grease Seal Availability for Trailer Hub with Outer Diameter of 3.0 inches
I have an older 1950 trailer. I just had the bearings packed, probably for the first time in very many years. He didnt have and couldnt at least quickly find the correct bearing seals. They say Nationalinch and 5970. My calipers say O.D....
Trailer Brakes To 2008 Scamp Deluxe with Dexter Number 9 Axles
Hi! I have a 2008 13foot Scamp Deluxe with a Dexter #9 axle, with brake mounting flanges. Brakes were never installed. Do you sell a complete kit brake shoes, drums, nuts and bolts, etc. for installing electronic brakes on this axle? Thanks....
Fixed Ladder Rack to Install in 2016 GMC Sierra Stake Pockets with and Fit with a BAK Revolver X2
Any ladder racks that keep the low profile of a BAK Revolver x2 tonneau cover by just using the stake pocket holes and not add the sliding rail system on top of the bed side rails. I know about the trac rac system but wanted something that...
What is Weight Capacity of BAKFlip G2 Hard Tonneau and Can it Be Taken Through Car Wash
Do you have to remove this cover if you go through a carwash? Is there a specified weight limit to the cover? looking at this for a 2017 RAM 1500 short bed thanks | The BAKFlip G2 Hard Tonneau Cover # BAK26207 referenced in your question is...
Recommended Folding Tonneau Cover for 2017 Honda Ridgeline
what is better? Hondas OEM or a BakFlip g2 or MK4, or another manufacture? thanks | I am not too familiar with the OEM tonneau cover for your 2017 Honda Ridgeline, but I did do some research on the cover so I could compare it to the aftermarket...
Filter Your Search
Contact and Help