Why Doesnt LED Work Light # UCL24CB have Replacement Bulb/Filament
What are the replacement bulbs for the UCL24CB? | The LED Work Light # UCL24CB that you referenced does not have replaceable filaments or bulbs. Since it's an LED style light that lasts almost indefinitely you wouldn't have to worry about replacing...
Troubleshooting Wiring Harness on 2003 Chevy S-10
I just purchased part #118359 wiring harness and trailer connecter for my 2003 Chevy S10. The lights come on and the turn signals work well. However, when I press the brake, all of the lights go out. Can you tell me how to fix the problem?...
Suspension Enhancement for a 2003 Chevy S-10 4x4 ZR2
do these fit my 2003 chevy s10 4x4 zr2? | The Air Lift Vehicle Suspension, # AL59531, is designed to fit the 2003 Chevy S-10 4x4 as long as it does not have a track bar. A track bar is a part of vehicle suspension on some vehicles that is designed...
Which MagnaFlow Exhaust Cutout Will Fit a 1996 Chevrolet S-10
Would a MagnaFlow Exhaust Cutout #MF10784 Fit a Chevy S10 Pickup? | According to my research, if you have the 2.2L I4 engine on your 1996 Chevrolet S-10 then you have 2-1/4" diameter exhaust pipe which means you would need to use the MagnaFlow...
Does Spare Tire have to be Moved to Install a Trailer Hitch on 1992 Chevy S-10 with Roll Pan Bumper
Do you have to relocate the spare tire? | According to Curt, when installing trailer hitch # 13920 on a 1992 Chevy S-10 with the factory roll pan bumper you only have to relocate the spare tire if the truck is a short bed model (6 foot bed)....
Installation of Tekonsha Electric Brake Controller in a 2003 Dodge Dakota
Do you have any instructions or video available?? Is there an under dash quick connector available? THX | We don't have a video of a Tekonsha brake controller, like the P3 # 90195, being installed into a 2003 Dodge Dakota like yours but I've...
What Prevents HyperFlashing of Trailer Turn Signals When Converting to LED Blinkers
I have an aluminum flatbed on my pickup. The taillights/brake lights are 6inch oval incandescent. If I switch to LED do I need to install resistors to avoid rapid flashing? | Yes, when switching to LED taillights on a vehicle that will be...
Can Stainless Steel Spring Latch be Welded to Steel Trailer Frame
I have a 6 x 12 trailer with a down gate can these be welded instead of bolted on? Or do u have one like this that can be welded on? Im including a pic of my trailer. It has a 4 ft gate | While you can weld stainless steel to regular steel...
Distance from Center of Hitch Pin Hole to Start of Hook on MaxxTow Tow Hook # MT70028
How far is the center of the pin hole from the back of the hook face plate? | I went out to the warehouse to take that measurement on the MaxxTow Tow Hook # MT70028 for you. From the center of the pin hole to plate where the hook starts to come...
Replacement Tarp for Extang Tuff Tonno Tonneau Cover on 1986 Chevy S-10 with 7 Foot Bed
I purchased the Tuff Tono 111 for my 1986 Chev S10, 7 foot bed several years ago. An animal has chewed off one corner of the tarp.So I need to replace the tarp only - I still have all the otaher parts and they are in good shape. This is a...
Correct Westin Chrome Rear Bumper for a 1986 Chevrolet C10 Pickup
Hello I had a quick question about one of your parts. Its Item # 76000-97200. I wanted to know if the bumper would fit a 1986 Chev Silverado c10 pick up truck or what part would fit perfectly for the truck. Thank you! | The correct Westin Fey...
How to Wire an Electric Winch on a Utility Trailer
I have a 16’ utility trailer and want to put a winch on the trailer along with a 12v battery to run it. I want to be able to charge the battery while driving. I have a 2011 Ram 1500 with a round 7 pin connection on the rear. Can I use this to...
Does the Westin Fey Bumper # 66001-97200 Come with a Hole to Access the Spare Tire?
Please verify that this bumper has a hole left of the license plate area to access the spare tire hanger for lowering. Thank you | I have an answer for you. Unfortunately, our installation team here at etrailer confirmed that the Westin Fey...
Blue Ox Base Plate Kit - Fixed Arms for 2001 Chevrolet S-10 Pickup
does this fit the above 2x2 LS 2.2L engine? | The # BX1633 is for bigger trucks like a 1500 but the Blue Ox Base Plate Kit - Fixed Arms Item # BX1625 is the confirmed fit from the manufacturer for your vehicle. |
Tonneau Covers that Fit 2003 Chevy S-10 6 ft Bed Stepside
Do you sell the LEER HARD, 1 Piece Fiberglass tonneau cover for my 03 S10 Pickup with a Standard 2 door cab and the 6 stepside bed ? Thanks | For your 2003 Chevy S-10 with the 6 foot bed and step side we only have soft roll-up style tonneaus...
Parts Needed to Flat Tow a 2002 Chevy S-10 Manual Transmission
Can I flat tow a 2002 S-10 5 speed manual transmission without a lube pump or drive shaft coupling.I keep getting different answers.Transmission specialist says yes chevy book says no.Thanks for your help | From the research I did it looks like...
Recommended 50 Amp Circuit Breaker for Larin Hitch Lift
Truck S-10 model 2000, single cabin the installation manual request customer to provide for: 1. 50 amp circuit breaker and two 2 6 AWG battery terminals with 5/16 opening. Is this the correct breaker for application? Any recommendation is...
Parts for Flat Towing 1998 Chevrolet S-10 Pickup Behind Class C Motorhome
Hello, I need help getting set up to tow a 1998 Chevy s-10 2 wheel drive behind my 2005 Class C Coachmen Freelander. I need tow bar , wiring harness, braking system , base plates, locking hitch pin. Please let me know what information you need...
Where Does Replacement Buckle Ends # PARTS-356A0001 Install on BAKFlip Tonneau Cover
Is this the strip that attaches on the back end of the cover next to the rear window? if not do you have that strip that attaches to the back end of the cover close to the rear window? Also I need the weather stripping for between the bed rails...
Step Bars for a 2001 Chevy S-10 Extended Cab ZR2
I have a 2001 chevy S 10 ZR2, extended cab PU, with the 6 cyl engine. Do these fit this vehicle? | We have several step bars that will work for the 2001 Chevy S-10 ZR2, including # 25-0675. I have included a link to the ones that will fit for...
Can Trailer Ball Hole in Towing Bumper Be Enlarged to Accommodate a 2-5/16 inch Trailer Ball
hello, i have a trailer that uses a 2 5/16 ball but the hole in my bumper is to small. would i be able to make it bigger safely? the hitch that is in the pic is not any good and has been cut on or i would just use it. | I wouldn't recommend...
Trailer Hitch Receiver Compatible With 1992 GMC Sonoma Short Bed
I have a 92 Sonoma 2dr rear drive, why wont this fit my short bed truck? | The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13132 will fit your 1992 GMC Sonoma truck as long as you have a factory step bumper. It will require...
Recommended Wiring and Trailer Brake Controller for 1998 Chevy S-10 Pickup
Im looking for a Plug-In Wiring Adapter for Electric Brake Controller for a 1998 Chevrolet S10 Pickup. Also a wiring kit to the back and brake controller. | We have everything you need to install a trailer brake controller on your vehicle,...
etrailer Trailer Hitch Fitment on a 1995 Chevy S-10 for Light Duty Trailer Towing
I need to tow a small trailer with my '95 S-10. Will this do the trick? | Yes, the etrailer Trailer Hitch Receiver # e44KR fits your 1995 Chevy S-10 and is rated to tow up to 4,000 lbs with a 400 lb tongue weight. I really like this hitch because...
Filter Your Search
Contact and Help