Roof Weight Capacity of 2020 Honda Fit
Can 2 Kayaks be carried on the roof of a 2020 Honda Fit. I presently have no rails or rack but do have J style Thule Kayak holders that have previously carried 2 Kayaks on a 2010 Honda element. | Honda doesn't offer an official roof weight capacity...
Can LaSalle Bristol XTRM Butyl Tape be Painted
Can it be painted ? If so latex or oil base paint ? | Yes butyl tape like the # 344270341411-1 can be painted by any solvent free paint latex or oil based would be fine. |
Where is the Best Place to Mount the InvisiBrake Controller Box in a 2011 Honda Fit
WHAT IS RECOMMENDED LOCATION TO MOUNT THE RM-8700 in a 2011 Honda fit | The best place to mount the box/controller part of the InvisiBrake # RM-8700 on any vehicle is under the driver's seat if there is space. You can check if there is enough...
Does Rainfly Need to be Removed from Yakima SkyRise HD Roof Tent for Travel
Does the rain fly need to be removed in order to close the tent for travel? | Before closing the Yakima SkyRise HD Tent # Y07437 up for travel you will need to remove the rainfly from the tent. I did also verify this with my contact at Yakima....
How Many Pieces is the Replacement 88 Inch Scraper Blade for SnowBear Snowplows
Hi, Are these sold as 2 pieces, or three pieces? Thanks, | The Replacement Scraper Blade for SnowBear Snowplows part # SB324-067 contains three blades which when combined will provide a total length of 88". I confirmed this with my contact...
Tow Bar Wiring For 2011 Honda Fit Flat Towed By Motor Home With Combined Wiring System
I want to wire the car using the separate turn signals from brake light. What do I need to order and how to do this work. Thanks a lot, this is a great how-to web site. BY THE WAY, THE MOTOR HOME IS A COMBINED WIRING SYSTEM. How to wire a...
How Much Does the Draw-Tite Hitch for a 2016 Honda Fit Weigh
Just wondering how much the hitch receiver weighs? Thanks. | The Draw-Tite Sportframe Trailer Hitch Receiver part # 24920 which is a fit for a 2016 Honda Fit weighs roughly 22 lbs. This will be very similar with the other trailer hitch options. |
Fit of Thule TH88VR Gateway Pro Trunk Mount Bike Rack on 2013 Honda Fit
Your information claims that the TH88VR is suitable for the Honda Fit 2013 LX car. However a local dealer says that I cannot use this on my car as the clips/straps that mount on the hatch could break or weaken the spoiler which could result...
Recommended Bike Rack for a Priority Cruiser Step Through Bike
Just wanting to confirm that the Swagman Current platform bike rack would work with a 2019 Honda Fit and a Priority Cruiser step through bike | Unless your 2019 Honda Fit has the EcoHitch Hidden Trailer Hitch item # EH78VR installed then the...
Trailer Hitch Receiver and Wiring For a 2019 Honda Fit Sport
Will this hitch work on the Sport model? | Yes, the Draw-Tite Sportframe Trailer Hitch Receiver # 24920 will fit your 2019 Honda Fit with the Sport trim. This receiver is confirmed to fit all trim levels of your Fit. I do recommend installing...
Trailer Wiring Harness for a 2016 Honda Fit
Checking to confirm the Curt 56011 wiring harness will be a direct fit for a 2016 3rd generation Honda Fit. You list the 1st and 2nd Gen Fit but not the 3rd. Thanks | Trailer wiring harness # C56011 does NOT fit the 2016 Honda Fit. The 2016...
Trailer Hitch and Wiring Recommendation for 2018 Honda Fit
We have a 2018 Honda Fit and were thinking about getting a small camper, but I have no idea if you can even tow a small camper with a Fit. What is the towing capacity for the 2018 Honda Fit LX and, assuming it could tow a small camper, what...
Higher Speed Rated Tire for Malone Trailer MPG464-LBT
I own this trailer and love it. Im very safety conscious and wondering if its possible to upgrade the wheels and/or tires to increase my safety factor. Is there a larger, more durable, or higher rated option that would bolt on and allow slightly...
Will the Draw-Tite Hitch for a 2013 Honda Fit Cause Bike Rack to Scrape Ground
While driving over common obstacles like speed bumps, drive ways, etc. will I have any issues with clearance on this hitch or in general? Im assuming its high enough to not have to worry about scraping too much. I plan on adding a kuat sherpa...
Will the Kuat Sherpa 2.0 2-Bike Platform Rack Fit a 2013 Honda Fit
Will this fit a 2013 honda fit and avoid close contact with heat from exhaust so nothign melts? | The Kuat Sherpa 2.0 2-Bike Platform Rack part # SH12P is a great option for a 2013 Honda Fit which used with a trailer hitch such as the EcoHitch...
No Brake Lights With Ignition Off Using Roadmaster Brake-Lite Relay Kit On a 2010 Honda Fit
I have installed the brake light relay per instructions and it is not working. I pulled the brake light fuse. I hooked the green wire to the output from the brake light switch green with silver bands and the black wire to the brake lights, ...
Do Both The Curt And Draw Tite Receivers Require The Exhaust Hanger To Be Bent On a 2017 Honda Fit?
Will I need to bend the exhaust hangers for the Curt hitch # C11406 for my 2017 Honda Fit. I see in the questions and reviews that it is necessary for the Draw Tite sport frame that goes with a 2017 Fit but did not see any mention of it for...
Recommended Hitch w/ a 2" Receiver for a 2010 Honda Fit
I may purchase a bike rack for heavy ebikes that requires a class 3 hitch compatible for 2010 Honda Fit. I found hitches that work with this car but can’t identify the class as class 3. Which model fits all these requirements? | The only option...
Recommendation for a Towing a 2015 Honda Fit with CVT Transmission
Can a 2015 Honda Fit with CVT transmission be towed behind a motorhome - 4 down? or on a tow dolly? Thanks | I did some checking and it looks like the CVT transmission 2015 Honda Fits aren't recommended for flat towing with all 4 wheels down...
Recommended Bike Rack for EcoHitch Trailer Hitch Installed on 2016 Honda Fit
We are thinking of getting a swagman quad 2+2 with the 306-x7273 is there any accessories that I should get or could use or need that would make life easier with this combo ? | The EcoHitch # 306-X7273 is a fit for your Honda Fit, and has...
Recommended Solution for Vehicle Mounted Tow Bar Compatible with Roadmaster EZ Base Plates
Is there an add on part that will allow me to fold and lock the tow bar in the upright position so I don’t have to remove it every time we want to use the car? Thanks | I may have a solution for you, but the Curt Tow Bar with Adjustable-Width...
Recommended Flat Towing Components For A 2011 Honda Fit
What parts are needed to flat tow a 2011 Honda Fit | To flat tow a 2011 Honda Fit you'll need the following components: Baseplate: Demco Tabless Base Plate Kit # DM9519236. Tow Bar: etrailer SD Non-Binding Tow Bar # e34ZR. This tow bar comes...
Can Kodiak XL ProLube Kit Work on 7,000 lb. Idler Hubs
will this work for an 8 lug 7000 pound idler hub | The Kodiak XL ProLube Kit # XLPROLUBE2440KIT will work with your 7,000 lb. idler hubs as long as your existing hub features a 2.440 hub bore diameter. This kit includes 2 seals that have an...
Can a 2013 Honda Fit with Automatic Transmission Be Flat Towed
Can a 2013 Honda Fit with automatic transmission be flat towed behind an RV? | I did some checking and it looks like your 2013 Honda Fit with an automatic transmission can be flat towed as long as you keep it under 65 mph. I would recommend...
Filter Your Search
Contact and Help