Mounting Two Yakima ShowDown Kayak Carriers on 1996 Ford F-250 Extended Cab
1996, F250, extended cab, 2-door. I have 1A towers and 58inch bars that BAIRLY fit, 1/16inch sticks out. I realize I will need longer bars, but how long to put two ShowDowns on? | The Yakima ShowDown Kayak or SUP Carrier # Y04081 requires at...
Determining Where Receiver Tube End Will Be On 1995 Ford F-350 With CM Flatbed Conversion
I’ve got a 1995 ford f350 dually that had a dually bed on it but was converted to a CM flatbed before I bought it. I’m needing a bumper pull hitch that will fit it and stick out past or even with the flatbed.frame width is 37-1/2 inches. Do...
Recommended Underbed Gooseneck Hitch and 5th Wheel Hitch For 1994 Ford F-250/350
Like som specs and reviews on the Putnam hawkeye15091 and some info for under bed brackets | I have another option for you that has great reviews and is similar to the hitch you mentioned, but we do not currently carry Putnam products. I recommend...
Determining Which Trailer Hitch Receiver Fits A 1995 Ford F-450 Cab and Chassis
I am looking for a hitch to install on my 95 F450. I am trying to weigh the benefits of maximum weight capacity vs. having a 2-1/2 inch receiver. Do you have any suggestions or am I missing a product. If this is a good choice hitch, can you...
Recommended Class IV Trailer Hitch Receiver For 1992 Ford F-250 Extended Cab 4WD
I need a class 4 hitch if available for 1992 F250 Extended cab 4WD. I previously had a 1992 F350 4 WD 4 door pickup truck and saved the hitch. It is not the same bolt pattern as the same year F250 Extended cab | We have just what you...
Transmission Cooler Options for a 1996 Ford F-250 with 7.3 Liter Diesel Engine
will this cooler work for my truck? | We currently have 6 transmission coolers that are recommended for your 1996 Ford F-250 with 7.3 liter diesel engine. I have included a link to them below. Even though the Derale Hyper-Cool Remote Transmission...
Class V Trailer Hitch Fit for 1993 Ford F350
does it clear this rivet 1993 f350 frame rivet at rear | Because the mounting flange of the Curt # C15511 Class V hitch has 3 tabs on each side, rather than a continuous mounting flange like many other hitches, it'll fit around the rivet shown...
Which Torklift Tie Downs are Correct Fit for 1996 Ford F-250
Hey there. I was just making sure these part number will fit my truck like they say they will I have a 96 Ford F-250 extended cab 8’ bed with NO running boards an for what I believe it’s an aftermarket hitch hidden hitch is the brand Will...
Is A Trailer Supposed To Have Two Diameter Axles?
on my 1993 terry fleatwood the front axle is a 3 inch and the back is a 2 3/4 is this a problem or is it safe and how do i figure out what should be on it ? | That's odd, typically a trailer doesn't have two different diameter axles since...
Towing Mirror Extensions For a 1996 Ford F-250
looking for mirror extensions for a 1996 ford f-250, what do you recommend? | We have 2 different styles of towing mirrors extensions for your 1996 Ford F-250 dependent on the mirrors that you do have. First the CIPA Custom Towing Mirrors...
Mounting Hole Dimensions For Drawtite Remov-A-Ball Gooseneck Trailer Hitch
What is the spacing between the mounting holes on the Draw-Tite 6300? Thank You! | I was able to go out to our warehouse and measure the Remov-A-Ball Gooseneck Hitch # 6300 for you. From center to center the holes were 11-1/4 inches apart...
Jack With Wheel Compatible with 500 Gallon Water Tank Trailer
I have an ABI 500 gal water trailer that I would like to fit with a wheeled jack instead of the standard pedestal style jack. The trailer weighs 1600 lbs and with 500 gal of water, it would be about 5600 lbs. Can you suggest the jack that...
Does the Draw-Tite Front Mounted Hitch for 1996 Ford F-250 or F-350 Come With Mounting Hardware
dose hitch come with any bolt, nuts, washers needed to install ? | Yes. The Draw-Tite # 65015 comes with all of the hardware and instructions needed to complete installation. |
Which Curt Front Hitch Fits 1993 Ford F-250 Diesel
Does front receiver hitch 31311 work for a 1993 f250 diesel? | If your 1993 Ford F-250 diesel is a 2 wheel drive then yes the # 31311 is a fit. If you have a 4 wheel drive instead you'd want the part # 31310. |
Which Westin Fey Surestep Rear Bumper Fits Old Body Style 1997 Ford F-250 HD
In 1997 Ford built 2 different f-250 trucks. The early model is now called the OBS old body style. If you enter 1997 Ford F-250 it shows the newer model of the two. Which chrome rear bumper with the black step pad will fit my 1997 Ford F-250...
Going from 4-Way to 7-Way on 1996 Ford Super Duty
Hello, i recently bought my dads old 1996 powerstroke. It has an older four prong round trailer plug and I’d like to update it to the modern 7 and 4 plug. I was hoping you could help me figure out what I’d need. Thank you | To adapt the 4-way...
Using T-1 Connector # 118316 and 4 to 7-Way Adapter # 37185 to Provide 7-Way for 1996 Ford F-350
Is part # 118316 the only harness you have ? Ive seen seven wire harness for later years, or do I have to use the 118316 and splice into brake controller wirerunning through the frame..Thanks | For an easy installation that would require...
5th Wheel Trailer Hitch Recommendation for a 2004 F-250 Super Duty Short Bed and Heartland Sundance
with heartlands 88 degree front trailer cap , is it safe to use this hitch or still go with the slider? | In this situation I recommend going with the best hitch for the truck rather than for the trailer if for no other reason than you might...
Whats the Difference Between Towing Capacity and Weight Distribution Towing Capacity?
What is the difference between Weight distribution towing capacity? And towing capacity? Thank you | I can help explain the difference between the listing for towing weight and weight distribution towing capacity for you. Let's use the Draw-Tite...
Measurements for Placing Fifth Wheel Rails in Bed of 1994 Ford F-350
I was wondering what the measurements for 5th wheel rails for 1994 f350 longbed are. | When installing a fifth wheel rail kit like the universal Reese kit part # RP30035 the rear rail edge will measure 32-1/2 inches from the rear edge of the...
Replacement Landing Gear Lead Leg Gears for 1996 Jayco Designer Series 5th Wheel
Needing repair kit for landing gear main jack | If the existing landing gear on your Jayco Designer Series 5th wheel is labeled Venture, Stromberg Carlson or Lippert, you can use the Repair Kit # LG-146059 for the Lead Jack or # LG-146060 for...
Are There Any Custom Fifth Wheel Install Kits for a 1995 Ford F-250
Looking at your website is the only frame support kit available the universal kit which has only angles that bolt to frame??? Thanks | Correct, there isn't any sort of custom fifth wheel install kit for a 1995 Ford F-250 because there aren't...
Difference Between Different Pace Edwards Contractor Rig Ladder Rack Part Numbers
Hello. I was just wondering what the difference between some products were. I was looking at the Pace Edwards Contractors ladder racks and they have model number 311-CR6007 , 311-CR6008, 311-CR6005. The model numbers are different but I cannot...
Distance from Adjustment Holes to End of Demco 5-Position Adjustable Channel Bracket # DM13867-52
What is the length from the adjustable part with holes to the end of the tongue channel? Inside length? | From the center of the holes on the vertical adjustment bracket of the Demco part # DM13867-52 to the end of the channel on opposite end...
Filter Your Search
Contact and Help