Troubleshooting Right Blinker Taillight of # TLL9RK Not Functioning on Trailer
Installed new led lights, wiring on trailer. The lights work in reverse of blinkers on vehicle. I installed new tow wires on my 2008 Mazda Tribute. Everything works great on vehicle per tester I purchased. I tried to simply switch wires...
Trailer Lights Not Working When Headlights are Turned On with a 2003 Mazda Tribute
I purchased part # 118343 and installed in my mazda tribute 2003 as per instructions. When my headlight is off, break and turn signals work fine in my trailer. But, when I turn on the headlights nothing works. Any help would be appreciated....
Instructions For Tow Ready T-One Wiring Harness, # 118343, On 2001 Mazda Tribute
Instructions are easy, but not clear. Please answer the above question. The instructions in note four say to unplug center black. My center is gray. My vehicle is a 2001 Tribute. Step 3 reads from the passenger side so my understanding is green...
Fastener Kit Needed for the Draw-Tite Trailer Hitch # 36501
How can I get the fastener kit 36501F for this hitch? | The proper mounting hardware can be ordered for the Draw-Tite Class II Trailer Hitch, item # 36501, by using item # RHK, replacement hardware kit, in the search box and then entering the...
Will the Draw-Tite Max-Frame Class III Trailer Hitch Fit on a 2005 Mazda Tribute S
will this hitch fit 2005 Mazda Tribute S? I have read conflicting reports. I am ready to order but need to make sure it will fit. Thank you | I verified with my contact at Draw-Tite that the Draw-Tite Max-Frame Class III Trailer Hitch, # 75751,...
Trailer Wiring Harness for a 2008 Mazda Tribute without Factory Tow Package
Have bought your 118251 only to find my car does not have relays and is not wired for relays. Can I buy the other parts I need to make my 1 18251 into your 118551 Thanks | If your 2008 Mazda Tribute did not come with the factory tow package...
Installing Draw-Tite Class III Receiver # 75751 on 2005 Mazda Tribute with Factory Receiver
Will I have to remove the factory 1.25 receiver hitch to install this or can I leave the factory hitch in place and add this product? | According to Draw-Tite, their Class III receiver, part # 75751 will indeed fit on a Mazda Tribute equipped...
Will the Draw-Tite # 36501 Receiver Fit with an OEM 1-1/4 Receiver on a 2005 Mazda Tribute
Will this work if you already have the factory installed, 1 1/4” hitch on your vehicle? I have seen some models that install underneath the factory hitch and dont require modification. 2005 Mazda Tribute V6 w factory hitch | Since the trailer...
Recommended Roof Rack That Can Work With A Kayak Carrier For 2004 Mazda Tribute
Can the Thule ride on adapter be used to carry 2 j style kayak racks? | Rhe Thule Ride-On Adapter part TH532 has been discontinued but will only work with bike carriers. This adapter uses plastic mounting hardware and cannot handle the stress...
Trailer Wiring Recommendation for a 2003 Mazda Tribute
Will 48895 work on a 2003 Mazda Tribute LX? | We have several trailer wiring options that are confirmed to fit your 2003 Mazda Tribute, but the part # HM48895 that you referenced is not one of them. Instead you would want the part # 118343...
Does the Replacement Pin and Tether # P307 Have a Ball Bearing
Is this the pin with ball bearing ? | Yes, the Replacement Pin and Tether # P307 that you referenced has a ball bearing in the pin to keep it from sliding out. I attached a picture that shows the pins pointed out on a Swagman XC Bike Rack...
trailer Hitch Recommendation For 2005 Mazda Tribute To Tow Small Boat And Trailer
Hi, I have a 14-ft aluminum boat/motor/trailer package total weight less than 1000 lbs. The trailer has a two-inch ball receiver - what is my best option for pulling this with my little SUV? | The trailer hitch I recommend for your 2005 Tribute...
Trailer Brake Controller Recommendation for a 2009 Mazda Tribute
mazda tribute 2009 what is the best brake controler i can buy for my tribute | For a 2009 Mazda Tribute the most popular brake controller, and the one I recommend, is the Tekonsha P2, # 90885. This controller is reliable, easy to use, and easy...
Why Does T-One Vehicle Wiring Harness Need to Be Connected to Both Taillights on 2002 Mazda Tribute
Hi if i only need the tail and brake lights on my trailer dont i only need to connect wiring to one of the tail lights of the car? the brake lights on the trailer are on one system of wires | You will want to connect the Vehicle Wiring Harness...
Trailer Left Brake/Turn Signal Goes On then Shuts Off w/Curt Wiring Harness on 2006 Mazda Tribute
I have a mazda tribute 2006 non-towing package. Purchase the curt connector for the vehicle to be able to plug it to my trailer. After i install the adapter to the vehicle side, I test it with a 4 pin flat trailer tester. The car was off and...
Troubleshooting Wiring Harness for 2002 Mazda Tribute With Tow Package
Hello, I have plugged in to the factory tow 4 way and I only have running lights. No turn signals and no brake lights? What should I do? Thank you! | I would first go to the connector behind the paneling in the cargo area on the driver side,...
Towing Capacity, Brake Controller, and 7-Way Trailer Connector for 2003 Mazda Tribute
I was looking at upgrading my hitch and adding a brake control with 7 way flat to a 2003 Mazda Tribute to tow a 1700 lb trailer with brakes and a couple of quads. I see the tow rating of this car is listed at 3500 lbs, but the factory towing...
Recommended Roof Rack Tent for SUV Roof Rack
Hey. Im new at the whole suv roof rack and tent situations. So I have some questions. I was looking at your roof bar options for the Mazda tribute 2002 and 2004. Also for the honda cv-r and was wondering if you can mount a rooftop tent on the...
Trailer Hitch Recommendation for 2005 Mazda Tribute
Will this hitch work on my 05 Mazda Tribute | The Curt # E-3S is meant to install on a full or medium size truck step bumper, and wouldn't work on your Tribute. We do offer custom designed hitches meant to fit your vehicle, and that's what...
Is a Trailer Hitch Receiver Adapter Needed to Tow a Boat With 2009 Mazda Tribute?
I have a 1 1/4 inch receiver and i need to pull a boat so id like to put on an extension with a 2 inch receiver, any thoughts | Using an adapter to go from a 1-1/4 inch receiver to a 2 inch receiver will have zero impact on whether or not your...
Troubleshooting Driver Side Turn Signal Not Working on 4-Way for 2009 Mazda Tribute
I bought your harness for a 2009 Mazda Tribute about 2 years ago. A month ago my D.S. turn signal went out intermittently. Now the whole drivers side is out. I plugged the socket back into the OEM connector on the left side for the time being,...
Fit of Curt Class III Receiver Part # 13650 on 2005 Mazda Tribute with Full-Sized Spare Tire
Can the 13650 tow hitch be installed in a 2005 Mazda Tribute with a full sized spare tire? My spare tire mounts under the vehicle, is a full size, and extends out almost to the back edge of the bumper. Will this fit? | Any of the class III...
Roof Rack Recommendation for a 2005 Mazda Tribute Flush Rails
am i able to attach Rhino Rack Roof Rack - DK28 on to my 2005 Mazda tribute with flush rails | The only roof rack designed to fit the flush rails on your 2005 Mazda Tribute roof is made by Inno and includes the following parts: - 42" Square...
Can a Taillight Converter Module Go Bad After Working Properly for Months
Is it possible for the Circuit Protected Modulite Powered Taillight Converter to go bad? I installed this several months ago and now it does not work. Using a test light, all circuits work beforeinch the converter, but nothing works afterinch...
Filter Your Search
Contact and Help