Do The Marlboro Continuous Hinges Come With Pre-Drilled Mounting Holes
I was looking at your 6 wide continuous hinge 1/2 pin diameter but in your picture I didnt see any holes for the screws or I have drill my own holes. | The 6" Wide Continuous Hinge - 8' Long - 1/2" Pin Diameter # MA32VR you referenced along...
Does 3" Wide Continuous Hinge # MA75VR Have Holes Pre-Drilled
Does it come with pre drilled holes? | The 3" Wide Continuous Hinge # MA75VR that you referenced does not come with holed drilled. We do not have any similar options that are pre-drilled. |
Hinge for Folding Nose of Trailer
Hello, I would like assistance in ing the appropriate hinge for my application. The application is we have a 200+ lb metal cover, which will be used to protect equipment. The only support the hinges have are the front lip of the trailer, where...
Can the 4" Wide Continuous Hinge MA85VR Be Cut To a Different Length?
Can this hinge be shortened? And would this be suitable to be used for a ramp door extension or would there be a better product? | Yes, the 6' Long, 4" Wide Continuous Hinge # MA85VR can be cut down to the length needed. It is a 270 degree...
Can The Marlboro 6' Piano Hinge Be Cut In Half?
Can this hinge be cut and used as two 3foot pieces? Or would the pin come out if its cut in half? | I reached out to Marlboro Manufacturing and they informed me that it is okay to cut their 4" Wide Continuous Hinge - 6' Long # MA42VR in half....
Recommended Hub & Drum & Brakes That Measures 10 x 2 1/4" and has a 5 on 4 1/2 Bolt Pattern
I need to mount to a 4 stud wheel flange. Can you point me in the direction of a 3500lb 10 x 2 1-4” brake w/ a 5 x 4.5 spacing? Does that exist. | Hey Derrick, the good news is yes it does exist. So what you're going to want is the Hydraulic...
Replacement Zerk Fitting For The UltraFab Weld-On Jumbo Steel Roller # UF48-979012
I need a replacement Zerk fitting for a skid wheel. What size do I need for the following model? and do you carry? 48-979023 UltraFab Weld-On Jumbo Steel Roller Weld On - 2-1/2inch Wide x 3inch Tall Item UF48-979023 | Hello Gaby. I reached...
Does Marlboro Weld on Hinge Have Weight Capacity
I was looking to weld on 2- MA59ZR 10 hinges and was wanted to know what the weight capacity they can support? Thank You | Marlboro does not list weight capacities for the # MA59ZR that you referenced. They state it will be up to the installer...
Can The Stainless Steel Piano Hinge # MA34ZR Be Cut To Fit?
Can this hinge be cut down? | Yes, the Stainless Steel Piano Hinge # MA34ZR can be trimmed down. You will be able to weld it or drill holes to mount the hinge for your application. |
Marlboro Manufacturing Continuous Hinge Material Type
Is the pinfoot also aluminum meaning that the entire hinge is made of aluminum. The intended application will be exterior and I need to avoid pins or any part of the hinge that will rust. Currently have installed a hinge not from Etrailer...
What Is the Weight Capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk
What are the weight specs for this hinge? Want to support a wooden barn door. Door will be approx 10 feet high by 6 feet wide. Door could be approximately 400 - 500 lbs I intend to use 3 hinges Can send pictures of intended hinge design tonight...
Can The Marlboro Continuous Hinge # MA64ZR Be Cut Down
Can this be cut down? My door is 5.5’ tall and has a 45 degree cut on the end to match the top part of frame | If you wanted to cut down the 2" Wide Continuous Hinge # MA64ZR you would want to first remove the pin and separate each part and...
Recommendations for a Transition Hinge for a Cargo Trailer Ramp
do you carry a cargo trailer ramp gap transition hinge? | The best hinge we have for your application is the 6" Wide Continuous Hinge - 1/2" Pin Diameter - Steel # MA32VR (8' long) or the # MA52VR (6' long). Since both of these hinges measure...
Are There Any 2" Wide Piano Hinges With A 1/4" Pin And 83-1/2" In Length
Im looking for a piano hinge for a 1995 Starlite pop up camper rear fold down door. It is 2x 83 1/2 with 1/4 pin. | We currently only offer a 2" piano hinge with a 1/4" diameter pin in a 72" length so you would need to purchase two and cut one...
What Size Grease Fitting Fits an RP94720 Reese 20K Goose Box
Need to replace the grease fitting on my Reese 20K Goose Box #94720. I tried a standard 1/4 x 28 grease fitting with no luck and can not find the correct size or pitch on the Reese or any other website. Any assistance would be greatly appreciated....
Weld On Hinges For a 70" Wide Trailer Door That Weighs 600LBS
I have a need for 2 sets of hinges 50inch long for a door 70inch wide constructed of stainless steel - overall weight 600# materials Stainless Steel Please advise if your hinges with 1.2inch pin will be capable of handling the load Mounting...
How To Pick Out the Correct Replacement Piano Hinge for a Cargo Ramp Door
Looking for a heavy-duty piano hinge for a cargo trailer door ramp. 58-60 in length. Thank you | The main factor in choosing the correct replacement piano hinge is pin diameter which then in turn, denotes capacity. The hinge width and material...
Replacement Hinge for Storage Door
I am looking for a replacement hinge for my storage door for my 2019 Forest River, Sandpiper 384QBOK 5th wheel ? | I would be happy to help you but I do not have any way of knowing what hinge is currently on your 2019 Forest River Sandpiper....
Can The Marlboro Continuous Hinge # MA74ZR Be Cut Down To Size
I need 19 hinges 36” long. Can these hinges be cut in half to make two hinges? | Yes, the 3" Wide Continuous Hinge - 6' Long - 1/4" Pin Diameter - Aluminum # MA74ZR can be cut down to fit your needs. I just recommend first removing the pin and...
What Lengths Are The Marlboro 6" Wide Continuous Hinge Available In?
Do you sell something similar that is shorter? I only need one that is like 13 inches long. | The 6" Wide Continuous Hinge we currently only carry in a 6' # MA52VR and 8' # MA32VR length. The 6' length is the shortest piano style hinge we carry...
What Size Zerk Fitting is Used on MORryde Shackle Kit MR46ZR
Hello, What size is the grease fitting on the wet bolts in the shackle upgrade kit from MorRyde MR46ZR | The grease zerk fitting for the MORryde # MR46ZR is M6 x1.0. |
Does Weld-On Barrel Hinge MA29ZR Have Weight Capacity? Thanks
How much weight can this hinge hold? Thanks | Hinges such as the Weld-on Barrel Hinge # MA29ZR are not given specific weight ratings as that is at the discretion of the fabricator. There's way too many variables to give a standard weight rating. I'd...
Does The Marlboro Continuous Hinge Come With Pre-Drilled Mounting Holes
The 72” continuous piano hinge you have for enclosed trailer that is 4 inches wide. Does it have the holes pre drilled in for mounting? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel # MA85VR does not come with pre-drilled...
Does The Weld-On Hinge MA66ZR Have A Weight Rating?
how much weight can these hold 3 of them on a 300 lb door | The Weld-On Hinge with Stainless Steel Bushing and Pin # MA66ZR you were looking at does not have a weight rating, but I reached out to my contact at Marlboro who makes this hinge and...
Filter Your Search
Contact and Help