Selecting Correct Ball Mount for Use with Class II Hitch on 2010 Dodge Avenger
How do I know what height drawbar to get and what length? They have different heights and different lengths. Do you have to measure to see which one to use? | Your 2010 Dodge Avenger can be fitted with either a light-duty 1-1/4-inch Class I...
Right Turn Signal/Brake Light Wire on Trailer Wiring Harness Hot All the Time on 2009 Dodge Avenger
2009 Dodge advenger Have tested the four way flat connector at the trailer hitch, OUTCOME: White wire ground: OK Brown wire running lights hot only with headlights...
Where Does Block Heater on 2012 Dodge Avenger With 3.6L Engine get Installed
Does it get installed on the RL or the RR? And does the coolant need to be drained? | On your 2012 Dodge Avenger, the Kat's Heaters Custom Fit Engine Block Heater # KH11814 will be installed in the RL position that you see in the accompanying...
Will the Hopkins # HM11142274 Wiring on a 2013 Dodge Avenger Work with a U-Haul Trailer
Is this harness compatible with a Uhaul Trailer are the connectors the same or would I just need to get a adapter of some sort. | As long as the U-Haul trailer has a 4-Way Flat connector then yes, the Hopkins Plug-In Simple Vehicle Wiring Harness...
Trailer Right Brake Light Goes Out with Left Turn Signal and Brakes On
So I got the Curt trailer lighting kit for the car and a trailer light kit. So the issue Im having is that all light functions work exept when the left signal is on with and without the lights on and the brakes are on, the right light turns...
Lowering Exhaust and Using Fishwire to Install a Trailer Hitch on a 2013 Dodge Avenger
Hello, I would like to order and install a hitch on my 2013 Dodge Avenger, however your instructions state the exhaust must be lowered, and your videos and instructions are not really clear on exactly how to lower the exhaust? Ive looked under...
Replacement Lid For A MaxxAir MaxxFan 4751KS
We just had a bad hail storm and the cover for our 4751ks vent fan broke. Do you have some kind of replacement that will work? Thanks | The correct replacement lid for MaxxFan 4751ks is the Replacement Lid for MaxxFan and MaxxFan Plus Roof...
Availability of 2" Hitch Receiver for a 2013 Dodge Avenger
I need a hitch with a 2 in hole not a 1 1/4 hole | The only trailer hitch receiver size available for your 2013 Dodge Avenger is 1-1/4" like what you find with the Curt # C11133 and Draw-Tite # 24871. Out of these 2 I recommend the Curt because...
Can Old Cable be Used for 1-1/2" Waste Valve System
Where is the grey tank cable measured from? My cable seems to be 132" for the entire set-up. Can I just order the 1.5 vavle and use my existing cable? | Potentially - it just depends on how your current valve is connected to the cable as well...
Troubleshooting Trailer Wiring Harness Installation in 2014 Dodge Avenger R/T
I purchased a hitch and wiring for my 2014 Dodge Avenger R/T. I had it installed by a Dodge mechanic. The wiring works with a test light, but when hooked to a trailer, nothing. Weve double checks the wires and ground. Thoughts? | Since you have...
Trunk Mount Bike Rack Recommendation for a 2013 Dodge Avenger SXT with Rear Spoiler
Looking for a Bike Rack for my 2013 Dodge Avenger SXT with rear Spoiler.Looking for a rack for 2 Bikes only.Thanks. | The trunk mount bike rack that I would recommend for your 2013 Dodge Avenger SXT with the rear spoiler is the Hollywood Racks...
Recommended Hitch and Bike Rack for a 2021 Alliance Valor 5th Wheel Trailer
I am looking to install a trailer hitch on my 2021 Alliance Valor for a bicycle carrier I will need one of those as well ??. If you can provide me with some options of both I would greatly appreciate it. Thank you, | To add a hitch to your...
Rhino-Rack Roof Rack Options for a 2008 Dodge Avenger
2008 Avenger will these fit and if so what kit will i need | The Rhno-Rack legs that fit your 2008 Dodge Avenger are the 2500 Series Legs # RRRLKVA. To complete the roof rack you need crossbars # RRVA126B-2, and fit kit # DK046 to install...
Troubleshooting 2010 Dodge Avenger Wiring Harness # 118445 That Has Stopped Functioning
I checked the fuse and it is ok. What else do you suggest. What is the warranty and can I get a replacement. | When you say that the # 118445 T-connector stopped working on your 2010 Dodge Avenger, was it just one function, or are none of the...
What Size Thread Is On The Ends Of The Lippert Replacement Hydraulic Cylinder # LC354176?
What size nuts are needed for threaded ends ? | The ends of the Lippert Replacement Hydraulic Cylinder # LC354176 are threaded for a 3/4"-10 nut size. |
Finding The Correct Gen-Y Goosebox For A 2022 Alliance Paradigm 340RL
I have a 2022 Alliance Paradigm 340RL. I would like to install the new Gen-Y Executive gooseneck hitch on my trailer. When I search on your site it brings up three options. How do I know which one fits. I have seen on Youtube that people have...
WeatherTech Floor Mats For a 2008 Dodge Avenger RT
Hello, I was wondering if there was a chance that weather tech can make 2008 dodge RT avenger weather tech mats. I have looked everywhere for car mats, but none of them seem to compare to your companys floor mats. If you are not making weather...
Will the Edge Insight CS2 Gauge Display Monitor EP84030 Work Well on my 2013 Dodge Avenger 2.4L
I have 2013 dodge avenger 2.4l I wonder if that chip will work well in my car and there will be no problem | The Edge Insight Monitor, # EP84030 will work well on your 2013 Dodge Avenger 2.4L. Using this monitor will allow you to keep a close...
Bike Rack That Will Clear Bumper on 2013 Dodge Avenger
Hello, I have a 2013 Dodge Avenger. Im looking at the Curt # C11133. My question is, will the masts of the bike rack clear the rear bumper when fully seated into the hitch? Thanks! | There are a number of bike racks that will work with your...
How To Lubricate the Pivot Points On A Curt Rota-Flex Pin Box
How do you lubricate the pivot point on the Curt RotaFlex? Preferred lubricant? | To lubricate the Curt Rota-Flex 5th Wheel Pin Box # LC328329 pivot points you'll just need a can of dry grease like part # RM-747 to grease the points without...
Does Installation of a Trailer Hitch Void Vehicle Warranty
Does installation of this hitch on a 2013 Dodge Avenger void the Dodge warranty? | When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states,...
im looking for the front cap led light strip that is 7, im not seeing this on the etrailer site. can you help me ? |
Where Does Kats Heaters Oil and Coolant Immersion Heater Install?
was looking at engine block warmer,KH30904,just where do you insert it to properly work? | The Kat's Heaters Oil and Coolant Immersion Heater # KH30904 is a 3-3/4" long immersion heater which simply screws into either the oil pan or engine block...
Looking for a sliding drawer that has a lower bolt down, weight limit 150 lbs or more. I was on a web site talking to a guy who said he bought it from your company. | We carry a bit of a variety of RV sliding cargo trays, like the MORryde RV...
Filter Your Search
Contact and Help