Options For 3" Weight Distribution Shank
I’m looking for a 3 inch Weight Distribution shank, this is for a class 5 hitch, with a 3inch opening. I’m trying not to use the reducers due to it being sloppy. | I suggest the Weight Distribution Shank for BulletProof Hitches Adjustable Ball...
Compatibility of Tall Trailer Coupler Height With 1-1/4 Inch Receiver
I have a sled trailer that measures 10 inches from the bottom of the coupler and my receiver 1 1/4 measures 10 inches from the ground. I am looking for a set up as close to a 10 inch rise as possible. I believe the highest rise available is...
What Are the Weight Ratings for the 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mounts
What is the tongue rated for in lbs? | The 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount # 358CLEVIS itself is rated for 20,000 lbs. This piece alone is not going to have a tongue weight rating, the channel mount with drawbar is...
Is The Fastway Lock Set Compatible With e2 Weight Distribution Hitch?
Fastway Flash 86-00-3660 Flash E-Series Can my Fastway E2 adjustable hitch height be adjusted by using these adjustment pins? Its not clear to me if they are compatible with my older E2 hitch system. I have two tow vehicles with very different...
Distance Between Mounting Holes of Replacement 2-Ball Platform for BulletProof # 358REPLACEMENTBALL
Balls # 358REPLACEMENTBALL so long as your channel is 3inch wide and has mounting holes 1-1/4inch apart and 3/4inch in diameter. this doesnt seem correct on the spacing between the mounting holes. can you measure center to center. 3/4 diameter...
Availability of Adjustable Ball Mount for 2-1/2 in Hitch in All Black
Is this hitch available in all black? | Fastway has an all black adjustable ball mount that fits 2-1/2 inch hitches and has 6 inches of drop with the part # FA49-00-5625. Fastway is made by same company as # DTALBM6625-2S as well. Or for a...
Ball Mount For 2 Inch Hitch With 13 to 14 Inches of Drop
I have an 11-1/2 drop down, but my trailer still rides a little high, i need a couple more inches of drop. is there any product similar to this for use on travel trailers? C27KR | While we do have a solution for you, there isn't an adapter like...
Where Are Bulletproof Hitches Made?
etrailer.com Representative, Where are the BulletProof Hitches Shackle 358smallshackle materials sourced and the shackles manufactured? Thanks for the prompt reply. | Bulletproof Hitch products, including the # 358smallshackle used to be made...
Can BulletProof Hitches 2-Ball Mount Be Used for Pintle Towing
Is there an attachment so I can tow pintle hook style with the HD256? | Yes, to tow a pintle hook style trailer with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch # HD256 you just need the Pintle Lock # 358Pintleattachment |
Can I Use Weight Distribution Shank for BulletProof Hitches with Equal-I-Zer Hitch
Will this adaptor fit the 12k equalizer wd system ,I already have the bullet proof hitch | Yes. The Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount # 358WEIGHTDIST can be used with an Equal-i-zer weight distribution...
Availability of Adjustable Ball Mount With 13 Inch Drop for Lifted Truck With 2-1/2 Inch Receiver
Hi, I have a 2016 GMC 2599HD with a 6 inch lift my receiver is 2.5” and measures 27inches to top of opening I pull a 7x14 tandem axle enclosed haul mark trailer that measures 14 inches from ground to bottom of coupler when level. I’m looking...
Why is the Rise Measurement Different From the Drop Measurement on Ball Mounts
explain why the and rise for this product are not the same dimension. The 4inch rise will work for my application but the description states 4inch , 2 3/4inch rise | The reason why ball mounts like the # EBMK4 have a different rise and drop...
Hello, I was curious if some of the ball/pintle combos can be flipped to get some rise for the ball mount. Specifically these 2 Curt products: C48007, CU37FR. Thanks, Steven | According to the folks at Curt, when the # CU37FR and # C48007...
Recommended 8 Inch Drop Ball Mount WIth Over 12 Inch Length
Im looking for something specific that I cant seem to find. Im looking for a 8 ball mount, but I would like a minimum of 12 length, 14-16 would be preferred. My GTW is 7500lbs. Shank can be 2 or 2.5. How can I achieve this setup? | It sounds...
High Capacity Ball Mount Recommendation for Heavy Boat Trailer
Im going to pull a large boat and want to know which ball mount is the strongest. My boat has a trailer tong weight of about 7,000 lbs. And the boat with the trailer weighs about 18,000 lbs. | The highest capacity ball mount we offer is the...
Recommended Locking Pins for a Shackle Hitch
Can you recommend two locking pins for this specific hitch I bought new recently? I need to lock the hitch to the truck and the clevis to the hitch. This is a very large expensive shackle and I want to prevent theft, thank you! | You will need...
Compatibility of BulletProof Hitch HD2010 Adjustable Ball Mount on Ford F250
will this part work on my f-250 to tow a 20-ft equipment trailer 7000-lb hauling a 5545 4x4 mahindra tractor with loader. | The BulletProof Hitch # HD2010 adjustable ball mount has a 12K capacity when used with the 2 inch ball or a 30K capacity...
Weight Capacity of Bulletproof Hitches Shackle Hitch part # ED20SHACKLE
The specs list the weight capacity at 30,000lbs. Just to confirm, is that the working load rating or the break point rating in which case the working load rating would be around 10,000? Thanks! | The weight capacity of the Bulletproof Hitches...
Replacement 2-Ball Mount Platform for 30K BulletProof Hitches 2-Ball Mount
Is the part with the hitch balls replaceable? Long story short I won't be asking my wife to mess with the hitch anymore... | Yes, the ball platform on the BulletProof Hitches 2-Ball Mount # ED204 is replaceable with the following part: - Replacement...
Adapter Needed With A BulletProof Hitches Ball Mount To Level The Trailer
I have a bulletproof 9inch hitch HD258 which works great for ping the ball except for a new 16foot cargo trailer I purchased. I need a additional inch or two of to alleviate the disproportional weight on the rear axle of the tandem set. The...
Why Does BulletProof Adjustable Ball Mount # HD258 Have Different Drop than Manufacturer
You say the Buller Proof HD258 has a 9 inch / rise . The Bullet Proof site states its an 8 inch / rise ? I need a ball hitch for my Chevy Silverado 2024 2500HD with a 2 /1/2 hitch that can tow 20000lbs and have a 7 inch . | Not every place...
Recommended Heavy Duty Adjustable Ball Mount For A Recessed Trailer Hitch
Hello, The trailer hitch on my vehicle is recessed behind the bumper by about 5". I am looking for a heavy duty adjustable ball mount that will clear the bumper. I tried a friends weigh safe ball mount and it was much too "short" and it hit...
Recommended Adjustable Ball Mount For A 2023 Mazda CX-9 With Draw Tite 76020 Hitch
Hello, I recently purchased a hitch from you for my 2023 CX-9 Item # 76020 The hitch is very low and recessed a good bit. I need to get an adjustable receiver to raise the ball. The challenge is how far the receiver is recessed. I own...
What Locking Hitch Pin Fits the BulletProof Hitches Adjustable 2-Ball Mount # ED2510?
What locking hitch pin will work with the BulletProof Hitches ED2510? | For a great compatible locking hitch pin for the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitches # ED2510, I recommend the InfiniteRule Hitch Lock for 2-1/2"...
Filter Your Search
Contact and Help