What Locking Hitch Pin Works with My BulletProof Adjustable Ball Mount # ED254?
I have the bulletproof hitch ED254. What locking hitch pin fits? | For a great locking hitch pin for your BulletProof Hitches Adjustable Ball Mount # ED254, I recommend the InfiniteRule Hitch Lock for 2-1/2" Hitches - 3-1/8" Span # 34061072-D....
Adjustable Ball Mount Recommendation for 2017 Ford F-350
I need to purchase a trailer hitch I have 3 models Im looking at and would appreciate some expert advice. Thanks | It sounds like from your history on our site that you're looking for an adjustable ball mount for your 2017 Ford F-350. Of the...
Width of BulletProof Hitches 2-Ball Mount # HD254 For Ball Mount Locking Pins
What is the width of the hitch/least hitch pin length it will accept? | The BulletProof Hitches 2-Ball Mount # HD254 is 3-1/2" wide from the outside of the channel to outside of channel. I have included an image showing you where I measured...
Can the BulletProof Hitches 2-Ball Mount # HD204 Be Placed In a Rise Orientation?
I need the hitch to raise not lower, trailer 21in, car is 17 in, can I reverse and raise vehicle, trailer 3500 lbs. | Yes, the BulletProof Hitches 2-Ball Mount # HD204 can be placed in the rise orientation allowing for a maximum 5-1/2" rise....
What Locking Hitch Pin Fits the BulletProof Hitches Adjustable 2-Ball Mount # ED2510?
What locking hitch pin will work with the BulletProof Hitches ED2510? | For a great compatible locking hitch pin for the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitches # ED2510, I recommend the InfiniteRule Hitch Lock for 2-1/2"...
Ball Mount for 3 Inch Trailer Hitch Receiver With the Most Drop
I am looking for a three inch receiver with a 11 inch drop with a 2-inch ball | We can get you close to an 11 inch drop, but there isn't a ball mount that fits a 3 inch trailer hitch receiver that has that much drop; the most drop for a ball...
Is the Shank for the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch Sold Separately
Do you offer just the HD256 shank w/o the two ball mount? | The BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch part # HD256 is sold as a complete unit, the shank is not available separately. |
Will Bulletproof Hitch Adjustable Ball Mount Allow Truck Tailgate to Open without Hitting Jack
do you know if any of the bulletproof hitches will allow you to tailgate without hitting trailer jack on a standard utility trailer with a 2022 f 150 thanks | That's going to depend a lot on the trailer setup as well which we can't know but...
Keyed Alike Locking Pins For Securing BulletProof Hitches 2-1/2" Adjustable Ball Mount To Receiver
What locking pins will I need to secure the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch - 13-1/4" Drop, 13" Rise - 36K Item # ED2512 to my truck? | The InfiniteRule Locking Pins # 34061674-D will allow you to secure the BulletProof Hitches...
Where Are Bulletproof Hitches Made?
etrailer.com Representative, Where are the BulletProof Hitches Shackle 358smallshackle materials sourced and the shackles manufactured? Thanks for the prompt reply. | All Bulletproof Hitch products, including the # 358smallshackle are sourced...
Does BulletProof Hitch Item # MD256 Include 2 and 2-5/16 Inch Trailer Balls
BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2inch Hitch - 6inch /Rise - 14,000 lbs Item # MD256. Does this hitch come complete with a 2inch and 2 5/16inch ball set up or is it sold separately. | The US made # MD256 BulletProof hitch...
Ball Mount with 10 Inch Pin to Hitch Ball Distance Minimum for 2-1/2 Inch Receiver
what is the distance from center of ball to center of pin that attaches hitch to receiver. need min 10 inches | For your 10 inch minimum I recommend the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch - 6" Drop/Rise - 22,000 lbs...
Clevis Hitch For a 2" Hitch with a 2,000 lb. Tongue Weight Capacity and 2-1/2" Tang Spread
I need a 2inch receiver Clevis hitch that the tongue is rated for 2,000lbs and has 2-1/2inch between the tangs. Do you make this hitch? Thank you | The 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount # 358CLEVIS has a spread of 2-1/2"...
Are BulletProof Hitches Receiver Locks Keyed Alike
These are all 3 Key number #13, please contact me and let me know if I can get another one keyed the same so I have 4 total. | The BulletProof Hitches Receiver Lock for Adjustable Ball Mount # BPH94FR are keyed alike, so unfortunately, even...
Where is the Bulldog Winch Big Dog Hook Made
where is it made? | The Bulldog Winch Big Dog Hook part # BDW20182 is made overseas but it does have a lifetime warranty so if there were every any issues with the tow hook, you'd be covered. It's not the same style but if you're looking for...
Recommended Weight Distribution Shank For a 3" Receiver Without Needing a Reducer
I recently upgraded to an 2019 Ford F350 from a RAM 1500. Have a husky centerline weight distribution hitch and purchased the reducers to get from the 3” ford receiver to the 2” shank. Using a 12” drop Experiencing quite a bit of sway using...
What is the Rise/Drop on BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch MD256
The ad in one place says the is 8inch and in the same ad 6, which is it I need an 8inch for one of my trailers. | The BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch # MD256 has an 8-1/4" drop and 8-1/2" rise. BulletProof Hitches does not...
Recommended Locking Hitch Pin for BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch
Hi, Im looking for the highest strength locking pin for my bulletproof hitch Im ordering through you guys. Can you please help? Im going to be buying 3 so keyed alike would be a bonus too. THANKS! | The InfiniteRule Locking Pins for BulletProof...
What Size Channel Does BulletProof Hitches 2-Ball Platform Fit
I need a channel style adjustable ball mount for my semi truck . I have my dimensions off the truck but I am not sure if the ball for adjustable bulletproof ball mount in your catalogue will work . I have a pic and its dimensions that I can...
What Does It Mean by Designed For Flat Towing Only For Blue Ox High-Low Adapter BLU53XR
Your video and description says for flat towing only and not to tow a trailer. What exactly does that mean? I want to this into the receiver on my truck and put my actual Hitch that hooks up to my trailer into this in the drop position. Can...
Does BulletProof Hitches Adjustable 2-Ball Mount # MD256 Come with Hitch Pin
do I receive a pin to attach to my receiver or do I need to buy that separately? | You will need to buy a hitch pin separately from the BulletProof Hitches Adjustable 2-Ball Mount # MD256. For that we have an option for a locking hitch pin like...
What Locking Hitch Pin do You Recommend for My BulletProof Adjustable 2-Ball Mount # ED256?
what locking hitch pin works with the BulletProof Hitches Adjustable 2-ball mount ED256? | For a locking hitch pin that works with the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch - 6" Drop/Rise # ED256, I recommend the InfiniteRule...
Locking Pin For Adjustment Connector of Fastway Flash Solid Steel HD Adjustable Ball Mount
need larger locking pins for ball, 2. 1/2” receiver, Your guys 20k flash steel, 2 inch to 2 5/16 flip ball, I want the same diameter locking pins that the hitch came with but they have cotter pins, Thanks Locking the ball to the receiver I...
How to Lock BulletProof Hitches 2-Ball Mount to Receiver and Lock Ball Mount to Shank
I love this bulletproof hitches ball mount. adjustable, heavy duty, and looks cool, which I see comes with a price. I'm willing to spend for quality, but I do want to make sure what's mine stays mine. So what can I get that will let me lock...
Filter Your Search
Contact and Help