Replacement Brake Assemblies and Hubs for Dual Axle Boat Trailer
Hi there, As you can see from the pics attached, the brakes on our boat trailer are completely gone. All I can pull off the original bill of sale for this trailer is it is a Roadrunner 8,500 dual axle trailer, built here in Vancouver, BC....
How Often Do Seals Need to be Replaced on Bearings with Bearing Buddies
I’ve had bearing buddies on my shoreland’r trailer for about 18,000 miles over the past few years, with ZERO problems. When traveling, it’s not unusual for me to travel 600-700 miles per day on longer trips. Almost without exception, all they...
Bearing Buddy Recommendation to Replace Dust Cap that Measures 1.964 inches
trying to figure out what size bearing buddy to get for my utility trailer. I measured the dust cap. With digital calipers it is 1.917 to the inside wall and to the outside of the wall it is 1.964 and when I eyball it with a tape measure it...
Why A Bearing Buddy Is Not Recommended On A 1986 Dodge Ram D100
can i use the buddy bearing on my pickup truck/ a 1986 dodge ram d 100? OR is it impractical.? what size would i use sounds like a good idea thought i would ask thanks | The Bearing Buddy bearing protectors are designed for use on boat trailers....
Grease Cap or Bearing Protector for Axle with LM67048 and 25580 Hub Bearings
Hey etrailer, I have an axle that uses: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal Do you know what size bearing buddy or hub cap I would use? 2.44? Thanks | You are absolutely correct, your hubs will require a grease cap/bearing protector...
Bearing Buddies Recommendation for a Dexter P-11 6 hole axle 6K Axle
I want to replace existing dust caps with the Bearing Buddies but unsure of what to order. I can read Dexter P-11 on the 6 hole hub axle but the model is illegible. They are 6K axles on a Foster HD 1212 dump trailer. | In order to determine...
How To Determine If Trailer Hub Bearing Is Full Of Grease
Hi ! In the video he says to fill the remainder with a grease gun , When do you know when it s full . Thanks | If you have EZ lube spindles with the grease fitting on the end, as seen in the video you are referring to for Replacement Trailer...
Trailer Hub Seal with Inner Diameter 1.375 and Outer Diameter 1.98 inches
Hello, Im in search of a grease seal from a 1978 EZ loader trailer. The grease seals that I have are in pretty bad shape but are measuring 1.35 ID and 1.96 outer diameter. Any help is appreciated! | The closest option we have would be the part...
How to Pick Out Bearing Buddy Size for Trailer
2/16/17...I purchased a trailer #62666/1,195 lb. capacity/12inch tire a few days ago. It sounds like I should start off right by ordering bearing buddies. I looked through comments, but did not see my trailer model number. Do you have a recommendation...
I have 8000lbs axles can I get barening buddie for it | In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub....
Do Bearing Buddies Work Well on Travel Trailer Hubs
I have a 24foot travel trailer - 2017 Grand Design/Imagine Ultra Lite. Are bearing buddies a good answer for the trailer. Can they handle the longer trips and extended use? I had bearing buddies on all three of my boat trailers and they were...
Bearing Buddy to Fit 2.5 inch Hub Bore of Lippert 5,200 lb Axle
I have a 10k dump trailer with tandem 5,200 lippert axles. I would like to install bearing buddies. First is this possible/smart, and secondly, the manual says that this lippert hub has a 2.5 in OD dust cap. Does Bearing Buddy make a 2.5 OD? Thanks!...
How To Measure For Correct Bearing Buddy Size
Im looking at adding BBs to my 35ft 8.5k travel trailer. Ive seen where you said to remove a bearing and get the number of the bearing. Also, seen where youve said to measure inside of hub with digital caliper. Id like to do it without removing...
Bearing Buddy Bearing Protector For a 2021 Triton LT WCI-X PWC Trailer
I have a 2021 Triton PWC Trailer model LT WCI-X and looking for a set of bearing buddys. Do you know the correct part # that would fit? Thank you. | According to the parts department at Triton your 2021 Triton LT WCI-X will need the Bearing...
How to Pick Out Bearing Buddy for Trailer
I have a 2015 carry-on 5x10 trailer and I would like install a bearing buddy but I’m not sure which on will fit my trailer. Do you know which one will work? Thank you | In order to pick out the correct bearing buddy you will need know the pilot...
Which grease seals for 2005 Hi Lo Travel Trailer with Torflex Axles
have a 2005 hi lo travel trailer has 10 x 2 .25 brakes with torque flex axles the tekonasha part # is 5604 for the grease seals.Could you tell me which one of yours fit and the price. | Since you have 10 x 2.25 brakes on Torflex axles, your...
Available Sizes of Bearing Buddy Grease Cap Bras
just received bearing buddy bras. one set fits my jet ski trailer but the other is too small for the boat trailer. I got the model 17-b. do you have one that is larger? the diameter of the boat trailer bearing is about 2 1/8. | We offer three...
What Size Grease Zerk Is On The Bearing Buddy?
What size grease fittings are used in bearing buddies? | The standard grease zerk fitting is 1/4" and that is what comes with most if not all the bearing buddys # BB2047SS. I've only had to mess with one standard size and use the Performance...
Dimensions of Bearing Buddy Bearing Protectors # BB2047
Hi there, Im needing a 52mm bearing cap for a special non trailer application. These BBs are the ONLY thing I can find that is that size and are major overkill. First, Do you have anything else that is 52mm in a plain old cap, preferably...
How To Measure to Pick Out Correct Bearing Buddy for Boat Trailer
Hello: I have a 1979 shoreline trailer and a 16foot boat. How do I measure for the correct buddy bearing size? Thanks | In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel...
Bearing Buddy Covers for Trailer with 2-Inch Bearing Buddies
looking for a bearing dust cover for my trailer the 1.98 is too small and 2.32 is too big I assume i need a two inch but can not find this size any suggestions? | The Replacement Bearing Buddy Bras (dust covers) # BB19B that you referenced are...
When Using Bearing Buddy Bearing Protectors Do I Need To Repack Bearings Periodically?
Does having a Bearing Buddy installed negate the need to take apart the wheel hub and repack the bearings with fresh grease periodically? | When you use the Bearing Buddy Bearing Protectors like # BB2441, so you do not need to take apart the...
Can Bearing Buddies Be Used on Travel Trailers
I always used bearing buddies on my boat trailers, but as I am new to the travel trailer scene, I dont see them on travel trailers. Why couldnt you use them on that application? or am I missing something? Thanks | Bearing Buddies can absolutely...
Will Bearing Buddies Fit on EZ Lube Trailer Axles
I have the EZ Lube spindles with the zerk fitting on the end, and ordered these new caps. Had a lot of trouble getting them on, and ended up cleaning the old metal caps and installing them with the new rubber plugs. They look identical but I...
Filter Your Search
Contact and Help