Rail Kit Recomendation for Use on a Reese Trail Boss hitch for 5th wheel in a 1981 Ford F-250
got a very good shape Trail Boss hitch but with no rails. Going onto 81 F-250 Ford pickup. Would a Universal rail work? Wanting to find used ones. thank you | Yes, you could use a Reese Fifth Wheel Installation Kit for the Ford F-250, 1981,...
Do I Need Weight Distribution when pulling a 1987 Coarseair trailer with my 2005 Ford F250?
I have a 2005 F250 Super Duty truck. I am going to pull a 1987 Coarseair trailer is it necessary to use the trunion distribution units to pull the trailer or is just the hitch sufficient I have noticed that the truck barely squats when hooked...
Replacement Bumper Recommendation for a 1996 Ford F-250
does the westin 61000 fit a 96 f250 4 wheel drive | I have a very similar bumper to the one you referenced that will fit your 1996 Ford F-250, but the # 61000-93500 is for older Toyotas. Instead you would want the part # 20000-92230. This is...
Fifth Wheel Rail Placement Location in Bed of 1995 Ford F-250
I bought a Reese rp30035 kit and am looking for instructions as to where exactly in the bed of the truck the rails are supposed to go. I was wondering if you guys coukd take some time and try to send them to me. The truck is an extended cab...
Mounting Hardware for the Easy Grip Assist Handle Part # PLR6618-A
Looking for the mounting hardware for part PLR6618-. | The mounting hardware needed to install the Easy Grip Assist Handle part # PLR6618-A is not included with the handle and we currently do not offer it separately. The reason for this is because...
How To Choose Correct Replacement Magnetic Door Switch
concerning series 28 electric steps which stopped working. locked steps open while going in and out, then moved to different location in the driveway, steps went in but would not come back out. Did the battery test so we know steps work...
Power Steering Cooler Recommendation for a 1985 Ford F-250 with a 460 Engine
Witch p.s. cooler can i use to replace the factory pre-bent cooling lines that come on a 85 F250 Ford Superduty truck with a 460 engine | The choice of a power steering cooler for your 1985 Ford F250 will be primarily dependent on how much...
How to Replace 9-Pin on Vehicle with 7-Way
Im converting a 1995 Ford F350 wired with a Pollack 9 pin PK12907 to a 7 blade 4 flat Hopkins #47185. Im have wiring for both from your site but am confused on the conversion - any help would be appreciated! | 9 pin connectors aren't normally...
Tonneau Cover With Compatible Ladder Rack for 1992 Ford F-350 Long Bed
Q : I have a 1992 Ford F350 long bed 96.5 inches inside front rail to tailgate. I would like a locking, weathertight tanneau cover that will work with a ladder rack, so I can haul 13foot long kayaks. It appears the Elevate rack system is great....
Should 1996 Ford F-250 Overload Springs Be Removed for Air Lift Air Bag Installation
Ahoy…Installing Air Lift 5000…1996 F250…Buddy who has a black belt in auto wrecking recommend removing overload spring entirely…Will this action would this create…MASTER. | Installing the Air Lift LoadLifter 5000 Air Helper Springs, like part...
Recommended Trailer Hitch Receiver for 1993 Ford F-350 Cab and Chassis
Hello, Im looking for a class V hitch for a 1993 F350 cab and chassis but have been unable to find one. Is there one you are aware of? I was looking at the Curt 15300 but it only fits standard bumper pickups. Thanks | For your 1993...
Gooseneck Trailer Hitch and Wiring for a 1993 Ford F-350 Dually with Overload Springs
1993 F-350 Dually with Overload Springs What is recommended for this Vehicle application? Also wiring kit for in bed installation of connector. | There are a few different gooseneck options available for your 1993 Ford F-350 with overload...
Multi-Fit Hitch Recommendation for a 1996 Ford Conquest Motorhome on E-350 Chassis
Hello, I have a 1996 Ford Conquest motorhome it was built on a E-350 Chassis, and Im looking for a class IV or V hitch that would fit. Thank You | I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit...
How to Install the Reese Universal Base Rails # RP30035 on a 1993 Ford F-250
Could you tell me the fifth wheel rail location measurements distance from rear rail edge to pickup rear bed edge for a 1993 Ford F-250 regular cab, 2wheel drive 8 foot bed. Using the universal installation kit. Thank you in advance for your...
Will Derale 8000 Transmission Cooler, # D13504, Fit A Ford F350 7.3L Diesel With Factory Cooler
Looking to purchase the Derale 8000 D13504 as an additional cooler to the factory one. The factory one is in between the air conditioning exchanger and the radiator. do I need any additional hardware other than whats supplied with the cooler?...
Slide-on CIPA Towing Mirrors for 1995 Ford F-350
Yes I have a customer with a 1995 Ford F350 and I'm looking for the CIPA slide on mirrors for towing. Needs for d/s and p/s. | The correct CIPA slide on mirrors that fit your customer's 1995 Ford F-350 depend on which mirror style the truck...
Recommended Gooseneck Trailer Hitch for a 1994 Ford F-250
i am looking into gooseneck hitches for my 1994 f250 single cab 7.3 idi and i have a four inch lift on her i was wondering if when looking would at products would that count as overload springs or not? thanks in advance. | The gooseneck trailer...
Mounting Surface to Top of Hitch Opening on B&W Trailer Hitch BWHDRH25198
I have a 1997 f250 old body style with a dump bed. The bed is a regular bed not a flatbed or a mason dump. Anyway the bumper tilts when the dump is operating so in order for this to work the hitch would need to be well below the bumper. Can...
Is Spare Tire Repositioning Necessary on 1992 Ford F-250 With Curt Hitch C15300?
I am trying to determine if I will need an after market wheel positioner for a 1992 F250 XLT 4x2 5.8L if it matters using the LT215/80R16 wheels including spare. Im sure the hitch will fit but there is a note that it may require an aftermarket...
Correct Roadmaster Exact Center Steering Stabilizer For 2018 Thor Hurricane 31S
I am thinking about getting the Roadmaster Exact steering stabilizer and I noticed that there are two different part numbers that could work on my 2018 Thor Hurricane 31S, according to your website. RM42RR or RM33RR, when I read the description...
Parts Needed to Install Brake Controller In 1993 Ford F-350 with Factory 7-Way
I have a 1993 Ford F350 pickup. The truck is setup to haul with 7 pin and 4 pin trailer connections. I want to buy and install a trailer brake controller. I cannot find a hook in under the dash. How would the trailer brake controller hook...
How Much Does The Adco Olefin HD RV Cover for Class A Motorhomes # AD74ZR Weigh
what is the total weight of the cover for my 2023 Thor Hurricane 37foot motor home? | The Adco Olefin HD RV Cover for Class A Motorhomes # AD74ZR weighs approximately 43lbs. I've attached a short video below where Adam will show you how to install...
Fifth Wheel and Gooseneck Wiring Harness for 1996 Ford F-250
PK11932 fitment with 1996 F250. Can you tell me if this will work on a 1996 F250. I installed the Ford OEM 7 pin connected at the back of my truck. | Though we do have an option for you, the wiring harness you mentioned will not work for your...
Brophy Camper Scissor Steps Weight Aluminum Vs. Steel
What is the weight of the S04 and AS04? | The Brophy Camper Scissor Steps - 4 Steps in aluminum, # AS04 has a shipping weight of 21 lbs. The Brophy Camper Scissor Steps - 4 Steps - Steel, # SS04 is 34 lbs. |
Filter Your Search
Contact and Help