How To Choose Correct Ramp Door Spring for a Nitro Toy Hauler Trailer
I have a 2022 XLR Nitro Toy Hauler will this ramp door spring work on my model camper | The Conventional Ramp Door Spring part # CB250D96SHD is designed for a trailer door measuring 80" to 96" wide with a hinged weight up to 250 lbs. In order...
Why Would Lippert Cross Shaft Landing Gear Bolts Keep Shearing
What size bolts are used in this cross shaft? Mine broke on my camper from the previous owner and I keep going thru bolts that I replace them with | If you are going through bolts of the # LC334096 that would indicate you actually have a bad...
Availability of 10 inch Brake Assemblies with 4.4k Capacity by Dexter
I have 2012 trailer Acadia to Forest river and I am look for a dexter brand brake kit 4.4k 10x21/4. Can not find this model. Does he still exist. Tank you | We do have the Dexter 10 inch brake assemblies you are looking for. For that the part...
Replacement Fan Blades For Elixir S545A3
I need to buy a replacement blade for Elixir S545A3 rest of the sticker is gone. Doesnt have to be same brand but work. What are my options? | Most of the Elixir motors have a D shaped shaft that the fan blade fits onto which is an outdated...
How To Determine The Corecct Replacement In-Wall Slide Out Motor For Your Trailer
Hi, I have a 2017 forest river xlr nitro. The motor on the bedroom closet slide went out. I need to replace it but am not sure if it is the 300:1 or 500:1. Are these slides usually equipped with 300:1 given their size? Its the slide in the photo. Thanks!...
How to Pick Out Replacement Bearings for Trailer with Unknown Axle
Looking to replace my wheel bearings on my 2003 29 Keystone Cougar travel trailer I am seeing if you can helpe with the right part. Thanks | I wasn't able to determine which axles you have on your trailer, but since there is a chance they could...
Can the Right Rear Landing Gear for Lippert Ground Control 3.0 Be Purchased Without Motor?
Can I buy just the right rear landing gear with out the motor my motor is fine just a bent landing gear | No, the Replacement 24-1/2" Right Rear Leg # LC344792 is only sold with the motor attached, unfortunately. This comes from Lippert already...
Is There an Internal TPMS That Will Work With Aluminum Liger Trailer Wheel
Hello, We have the Lionshead Liger and are looking for TPMS for them with the goal of being able to connect to Chevys trailering system. Question 1 do you sell a TPMS that would work for this wheel? 2do you know the sensor size required for...
Landing Gear Fitment on 2021 Forest River XLR Nitro 35141 5th Wheel Toy Hauler
I have a 2021 XLR Nitro 35141 ft 5th wheel, will the MORryde MR72ar fit my toyhauler? I measured between my jacks and it is 81 inches. | Since the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR fully extends up to 80" and the...
Replacement Dometic with Furrion
I have already purchased and replaced my Dometic acs w/ 2-Furrion 15,500 BTU ACs, which they were plug n play. Im looking to upgrade to the Furrion everything, thermostat, controller, etc. I know i need the muti-zone thermo. and controller....
Powered Awning Setup For 2020 Boost XLR And Other Toy Haulers / RVs
We saw a 2018 Forest River for Nitro toy hauler with an automatic Thule awning on the rear of the trailer. Can you tell me which one it is? We have a 2020 Boost XLR we want to put one on. | We do have a few options that you could consider...
Recommended psi for Ride-Rite Air Helper Springs on a 2000 Coachman Catalina Towing a Minivan
I have a 2000 Coachmen, Catalina Class A motor home. I have the Ride Rite Air Helper Springs. I tow a mini van and would like to know how much PSI is recommended when traveling? | The Ride-Rite Air Helper Springs from Firestone should always...
Is Adco Olefin HD RV Cover Best Cover for 2022 Forest River XLR Nitro 28DK5
Cover for 2022 Forest River XLR Nitro 28DK5. I live in south central Texas 100 miles from the Gulf and the sun is brutal in the summer. Is this the best cover for protecting my toy hauler from the sun and rain? What is the useful life expectancy...
Which MORryde Suspension Upgrade Kit for Tandem Axle Trailers Fits 2022 XLR Nitro 28DK5
We have a new to us XLR Nitro 28dk5 5th wheel 2 axle toy hauler. The suspension is pretty noisy despite having a Morryde CRE 3000 on it. I poked at it the other day and realized it doesnt have wet bolts on it. Looking at a wet bolt kit for it...
Can Valve Stem of Aluminum Viking Series Valhalla Trailer Wheel Handle 120 psi
What are the valve stem rated for on Item # AX02665865HDBMMFL. My G rated tires recommend 120psi cold. Also, are all trailer axles with 8 lugs, 8x6.5 spacing? | A cold psi of 120 is absolutely no problem for the Aluminum Viking Series Valhalla...
Do I Need A Support Jack To Replace A Gearbox For My 5th Wheel Trailer
Do you need to place a support jack under trailer before you remove gearbox ? My tube on the gear side did not retract the same amount as the non gearbox side. I suspect gearbox may need replaced. | If you can level your trailer it is not...
Which Torklift Stairs for Forest River XLR Nitro 5W Toy Hauler
I want to order today/tomorrow the torklift revolution steps and would prefer uplift. Our toy hauler is a Nitro XLR T27QWA. The step area under the door is 27 inches wide x 12 deep. From the ground to the bottom of the door is 28 inches. Which...
Filter Your Search
Contact and Help