Adding Tail Lights To A Travel Trailer. Is The STL90RB Brighter Than The PE64AR?
I am adding tail lights and mounting them high on the back of a travel trailer because bikes on a carrier block the low factory lights. Comparing STL90rb optronics to PE64ar Peterson lights, in your opinion which would be brighter or rather...
Magnetic Tow Lights Stay on When Connected to 4-Pole Connector on Tow Vehicle
Hello, On the vehicle side I have a T-connector with 4 pin output connected to a 7 pin socket that works correctly with my camper and when double checked with a test light. The problem is that when I hook up a set of 4 pin towing lights 2 magnetic...
Replacement Amber Clearance Light Lens for Roadmaster Tow Dolly RM3477 Fenders
I need the small lense cover that sticks out from the RM 3477 fender. I think it is a running light. I need one for each side I think they are the same. Email me and I will send a picture. Thank You | It sounds like you need the oval amber light...
Peterson Model 428S Tail Lights Without License Plate Illumination
Hello customer service team. I need to purchase 2 x Peterson model 428 taillamp assemblies. I see you make a distinction between RH and LH. I DO NOT wish to utilize the license plate illumination feature. Is there any reason I couldnt order...
Correct Base Plates and Other Parts Needed To Flat Tow a 2013 Mini Roadster
i inherited a bx1303 and want to modify it to fit my 2013 mini s Roadster. couple questions: other than the base plate what will i need to buy to be able to tow behind my Mercedes sprinter 3500 Navion ? what are the obvious modification issues...
Available Document/Certificate Holder For Trailers
I was told that I need a document holder for my trailer. Do you carry any of these or know where I can find them. | We actually carry a few different document holders for your to choose from for your trailer. Here is a list you can choose from....
Replacement Lens For Peterson Square Trailer Light # 440151
need a snap on reflector not a screw in type do you have those. | Per our contact at Peterson, the original lights came with a snap-on lens. The replacement lens is part # 55-15R you came from. They said that they do not make a replacement...
Compatibility of Light Guard and Trailer Lights
Is the Light Guard - Unpainted Steel for 440 Tail Light - LG440N compatible with the ONE LED Trailer Tail Light - 7 Function - Submersible - Square - Red Lens - Driver Side - STL009RB? | The Light Guard # LG440NP would not be compatible with...
Recommended Tail Light Replacement Lens for Vintage Glass Lenses
I have vintage tail lights on my chopped car. I dont know what theyre from. They have cracked glass lenses. Id like to get two replacements and from what I can gather, glass is no longer an option. The lenses measure 3.46 diameter or 87.9mm....
Parts Needed to Flat Tow a 2013 Honda Fit Sport Automatic Behind a Motor Home
Can the 2013 Honda Fit Sport automatic be towed behind a motorhome? My purchase is dependent on your answer. | The best place to check to see if a vehicle can be flat towed behind a motor home is the owners manual. I found one online for the...
Does The LumenX LED Trailer Tail Light # PE77ZV Have or Need a Mounting Gasket?
I was wondering if the PE77ZV part number comes with a mounting gasket. If not, does it need one and what would that part number be? | The LumenX LED Trailer Tail Light # PE77ZV does not have a mounting gasket and in most situations it does...
LED Replacement Trailer Taillights for Peterson 440-15R
Hi. Replacing both tail lights on a newly rebuilt / painted trailer. It has angles turned down where the lights attach. It had Peterson 440-15 tail lights. The angles only allow, at best, 2 1/8inch from the center of the bolts to the top of...
Is There A Specific Angle Necessary To Meet Side Reflector Requirements?
What angles could this reflector be mounted at that would still fulfill the requirements for a trailer side reflex reflector? Can the reflector be installed at a 45-degree angle? | The Amber Rectangular Microprismatic Reflector # B489A can be...
Troubleshooting Trailer Wiring Turn Signals Not Functioning
I have two plug ins for my trailer. One in the bed of my truck and one on the bumper. When I am plugged into the bed of my truck the Left turn signal doesnt work. When I am plugged into the bumper my Right turn signal doesnt work. What...
Is There a Light Bezel for the Peterson Piranha LED Clearance and Side Marker Trailer Light
do they make a chrome bezel for these lights | There is one option, though there isn't an exact chrome bezel made for the Peterson Piranha LED Clearance and Side Marker Trailer Light with Turn Signals # M353R (Red Lens) or # M353A (Amber Lens). The...
Do I Have to Replace the Wedge Lights on my Boat Trailer with Wedge Lights for LED Upgrade
I have been upgrading my boat trailer to led lights but can not find one style to complete the job I have what look like a wedge amber light M116A mine is a westbar. my question is does it have to be wedge or can i use a rectangular light like...
Installation of Replacement Trailer Lights on Boat Trailer with Multiple Ground Wires
Hello, I need to replace the tail lights on the trailer for my jon boat Trailstar trailer. I removed the tail lights and noticed a ground wire from my trailer connected to the ground wire on the light on each light see attached picture. I looked...
Dinghy Tow Wiring for 2018 Chevy Silverado 1500
I sold my 13 gmc truck. Had a wire harness that plugged into the taillight area factory connection. Harness went to front of veh and plugged into motorhome for flat dingy tow lights . I now have 18’ chev Silverado 1500 4x4. I need another plug...
Does Battery Need To Be Disconnected When Flat Towing A 2011 Ford Fiesta Automatic
What happens if I tow a 2011 Ford Fiesta automatic without disconnecting the battery? | It is recommended to disconnect the battery on your 2011 Ford Fiesta automatic when it is being flat towed. Your vehicle has a feature that will not allow...
Can 14 Gauge Wire be Used with Trailer Stop/Turn/Clearance Light # 432200
Hello, Im looking for a set of trailer lights to replace my old ones. I am looking to use the wiring I already have installed on the trailer so, Im only searching for the light, light housing units for both right and left sides. My question...
Replacement Round License Plate Light with Ear Mount Bracket and 2-Prong Plug
Hello, I need to replace the License Plate Light actually two of them on my Motor Coach. The Light fixture has 9044 ASAEL 75W. Hopefully, you have a direct LED replacement. Thanks for your help | Hi Dave, I have an option for for you, however,...
Availability of Peterson Clearance or Side Marker Trailer Light with Single Wire Design
My trailer has lights similar to the 425000 but is a single wire light, do you offer such a light? | We do not have a light assembly similar to the Peterson # 425000 that features a single wire design. It sounds like your existing light uses...
How Does Wiring Run to the Peterson Trailer Light part # 432400
I dont understand how the wires connect to the back of the light. Do I simply take the braided wires, shove them into the holes and they magically stay there? Ive never seen this type of connection before. Also, how do your release the wire...
Replacement Tail Light for 1988 Jayco Jay-Series 1008 Pop Up Camper
Good Morning, I need to replace my broken driver side tail-light lens cover for our 1988 Jayco J-Series 1008 DD Pop Up Camper. The bulbs and all work just fine. I am looking for a compatible piece unless we need to replace the entire component...
Filter Your Search
Contact and Help