Removing Broken Lippert Electric Stabilizer jacks
My Lippert electric stabilizer jacks are extended out and will not retract. The electric motor has power, as when you push the button, the motor starts. The jacks are located on the rear, I lowered the front of the trailer so the rear jacks...
Replacement Spring-Loaded Landing Gear Drop Leg Pull Pin with 3/8 Inch Diameter
I would like to know what part you recommend to replace the fifth wheel landing gear pins that came in the box seen in the attached picture. | The Ultra-Fab Spring-Loaded Quick Pins for Landing Gear Drop Legs - 3/8" Diameter - Qty 2 # UF17-943031...
How To Fix Out Of Stroke Error When Leveling Camper
Hello we have a sidewinder with Lippert ground control system and we are having trouble getting all six jacks to retract and level can you help me. It shows Out of stroke on the touchpad. | If you are getting an "Out of Stroke" error message...
Does 5th Wheel King Pin Tripod Help Reduce Side to Side Sway
MINE HAS MOVE OF SwAY FEELING WHEN PEOPLE WALK IN CAMPER. SEEMS MORE OF SIDE TO SIDE. I USE WHEEL CHOCKS. DOES THE TRIPOD HELP | If you are still feeling a bit of side-to-side sway even with a leveling system in your 5th wheel camper, the Ultra-Fab...
Recommended Stabilizer Jack For A 2020 Keystone Hideout
Any idea who makes a J-2500 stabilizer jack on the 2020 keystone hideouts? There is no brand name listed on the jack. Needing a direct exact replacement since mine is welding on so I was going to leave the base and just RandI 2 bolts then swap...
Electric Stabilizer Recommendation for Stabilizer Set with Damaged Side
Can you buy just one stabilizer, the left to replace. Or do you have to buy the complete unit with both stabilizers on it. | The individual sides of the stabilizer kit you have on your trailer are not available so now would be the time to replace...
Front Hitch and Motorcycle Carrier for Ford F-350
Vehicle is a Ford F-350 with a 5th wheel trailer, and I want to carry my 2008 Suzuki SV650 motorcycle which weighs 370 lb dry, 435 lb wet. With the 5th wheel, I cannot put the bike in the truck bed. Is a front mount hitch for the F-350 my best...
Availability of 3-Receiver Trailer Hitch for Mercedes Sprinter
Do you have a 3-Receiver Hitch similar to Code SC9000 3-Receiver Hitch for Blue Ox Sport Carriers which is compatible with the Mercedes Sprinter? My load will be a cargo carrier containing extra fuel canisters. We will be traveling on rough...
Grease Fitting Replacement Info for the Ultra-Fab Power Twin II Electric Stabilizer # UF39-941705
What size are the grease fittings for this unit? I need to replace them and do the fittings screw in and out? | I spoke to my contact at Ultra Fab and the Ultra-Fab Power Twin II Electric Stabilizer # UF39-941705 uses threaded grease fittings...
Can Ultra-Fab Universal Access Door be Bent to Match Curvature of a Trailer
I plan to mount this to the front of our enclosed trailer. the front has a curve to it and Im planning to mount it there. Do you think I could carefully bend the frame and door to match the curve? Maybe theres some way to mount a trim kit...
Bolt Diameter For The Curt Adjustable Trailer Hitch Receiver For A 2019 Vilano 5th Wheel
What is the diameter of the bolts you use? My attaching frame is 73 in. | The Adjustable Width Trailer Hitch Receiver for RVs # 13703 only fits frames up to 72" so you would need a trailer hitch receiver like the Ultra-Fab 2" Trailer Hitch...
Can the Ultra Fab Carrier # UF48-979033 Carry a 2013 Triumph Bonneville T100
Id like to carry my 2013 Triumph Bonneville T100 behind my 1996 Fleetwood Jamboree 29ft motorhome. Will this be sufficient? Im a little worried about it bouncing around back there... | Ultra Fab has confirmed that the Ultra-Fab Motorcycle...
Powered Landing Gear to Replace Ram 12K Landing Gear
On a 2018 ram 12k dual landing gear? | The Bulldog Powered-Drive Kit for Single-Speed Jacks w/ 12,000-lb Capacity # BD1824200100 is designed specifically for Bulldog jacks so I can't confirm that it will also fit your Ram landing gear, so the...
Trailer Hitch Recommendation for 2011 Heartland Landmark Grand Canyon 5th Wheel RV
We have a 2011 Heartland Landmark Grand Canyon 5th wheel RV which of your hitches will work on the rear of our RV. Thankyou | We offer a range of 2-inch RV trailer hitch receivers including both bumper-mount and frame-mount types. The bumper...
Stabilizing a Trailer Side to Side and Front to Back
I have 2009 surveyor 30inch trailer received x-chocks and thought their would be enough space between tires 1 and 3/8 inch was in description was wondering if their is a product out their you could recommend which will hold trailer from rocking...
Recommended Trailer Hitch Receiver and Motorcycle Carrier for 2012 Honda Odyssey
I have a 2012 Honda Odyssey EX and would like to transport a dirt bike weight approx. 320lbs. Can you please recommend the correct hitch and carrier for this purpose. Thanks. | For your 2012 Honda Odyssey EX, I recommend the Draw-Tite Max-Frame...
Front Mount Hitch and Motorcycle Carrier for a 2008 Ford F-350 4WD
I have a 4WD dually f350 2008. I want to front mount a carrier to haul my 1998 dr350 suzuki weight of 350lbs for bike plus the carrier.. still have not ordered the carrier as of yet, Pretty much like attached photo. Any sugestion? | For a front...
Trailer Hitch and Cargo Carrier to Hold Honda EU3000is Generator on Back of Jayco Travel Trailer
Hi, I have a 2008 Jayco Jay feather. I also have a Honda EU3000is. I want to bring my generator along when traveling. The generator is too heavy for me to lift alone. Can you suggest something for me to mount the generator on I cant find the...
Replacement Landing Gear for Frame Clamps That Measure 18-1/2 Inches Apart
I have a 99 Savannah that I need to replace the landing gear. I read some of your answers on this, you said to measure the distance between the underside if top bracket to to of the lower bracket. Mine is 18.5 inch The jack itself, not the part...
Scissor Jack Stabilizer Jack Compatible with 8,000 lbs
Is there any scissor jack with a LIFT capacity of 8000 lbs? | Scissor jacks are stabilizing jacks and not intended for lifting. Their rated capacity is only for stabilizing. We have kits with capacities above 8,000 lbs but the largest support...
A-Frame Trailer Jacks that Have Highest Lift Ability
I have a 1972 Prowler trailer. We have moved the axle to under the springs to give the black water and gray water tanks more clearance on the trails and hills of course the axle still clears the same. This has improved the entry and departure...
Solution for Preventing Car Hauler from Dragging
I have a 48 ft car trailer that carriees 3 cars at once. It rides so low even after installing new heavy-duty leaf springs to the trailer. It sits on a 5th wheel vs gooseneck. Im sure the gooseneck will allow it sit lower but we prefer the...
Can You Use Stabilizer Jacks Without Having To Mount Or Weld Them To The RV Frame
I have a 1970 vintage Aristocrat Lo-Liner camper trailer. There isn’t enough clearance to bold stabilizer jacks to the frame when traveling over uneven roads. Can I use stabilizer jacks without mounting to frame, and if not, what would you recommend...
Recommended Spare Tire Carrier for 4" Square Rear Bumper on RV
What is the spacing between the mounting bolts? Will it mount on a 4” square rear bumper? Thanks | The bolts on the Demco Spare Tire Carrier for up to 4" Trailer Tongue - Silver # DM15851-52 are roughly 4-1/2" apart; this carrier is designed...
Filter Your Search
Contact and Help