Recommendation for Class V Hitch Lock and Coupler Lock
I’m looking for a keyed set of class V hitch lock or hitch pin lock and 1/2 inch coupler lock. Do you sell anything like that? | There are many hitch receiver sizes available in Class V. For a 2 inch receiver, I recommend the Bulldog Lifelong...
Can Same Weight Distribution System and Settings be Used Between Two Trailers
I purchased PN FA94-00-0600 for my 2008 Toyota Tacoma. I also have a 2015 Toyota Highlander that has the ability to tow and would be using it to tow the same trailer. I am wondering if when you switch the system from one vehicle to another,...
Solution for Diversi-Tech/Fastway Adjustable Ball Mount that Keeps Breaking Keys
Locking pin on the ball mount is frozen. I can remove entire thing from the truck receiver upper key turns, but cannot adjust the height of the ball because the key will only rotate about 80 degrees. I broke one key off in the lock and ordered...
Can Fastway Weight Distribution System Install on Trailer with Sheet Metal On Top of Frame
My horse trailers tongue has a flat, sheet metal plate covering the area between the frame rails. The rails themselves are rectangular tubes. Can the Fastway e2 8K hitch mount to that tongue? How? Must I drill through the frame rails to...
Recommendation on a Weight Distribution System Tongue Weight 400 lbs and GTW 4000
I have a 2015 Tacoma V6, manual tranny, with tow package, quad cab, short bed towing a 2013 trailmanor 2720QB with a tongue weight of 346 plus whatever gear I will put behind the real axle maybe 100 lbs, 200 max. Trailer weight is 2742 lbs...
Recommended Weight Distribution System for a 5,500 lbs Winnebago Micro Mini FLX Trailer
I have a 2021 Grand Cherokee Trailhawk with V6 engine and auto leveling. I am planning on purchasing a Winnebago Micro Mini FLX trailer with a GVWR of 5500 lbs. Which Weight Distribution hitch is recommended? | Congrats on the new travel trailer!...
Additional Replacement Keys For Fastway Coupler Locks Keyed to Lock 310
Can I get some additional key for this? | Yes, we do have Replacement Keys # FA-KEY-310 which will fit the Fastway Universal Coupler Lock # FA86-0015-310. The lock itself will come with 2 keys and the replacements come as a set of 2 as well. |
Recommneded Weight Distribution Hitch For a Forest River Rockwood Roo 235S
I have a 2020 Toyota Tundra. My travel trailer is a Rockwood Roo 235S. The UVW of the trailer per Rockwood is 5639 lb. Likely will be between 100 and 300 pounds heavier once I fully load it . The tongue weight per Rockwood is 738 lb., but I...
What Size are the Balls with Flash E Series HD Adjustable 2-Ball Mount # FA42-00-2925
I have a 2017 Dodge Ram 2500 SLT I have a 7” or 7 1/2” BW receiver hitch and my little utility trailer travels to high in front This hitch here is 10” which would solve my problem But the trailer requires a 2” coupler Is the smaller ball...
Are the Balls on the Diversi-Tech Solid-Tow Adjustable Ball Mount # DTSTBM6800 Replaceable
Can the balls be easily removed and replaced? If so, does etrailer carry replacements? Thanks! | The hitch balls for the Diversi-Tech Solid-Tow Adjustable Ball Mount, # DTSTBM6800, are easily removable and replaceable. You simply thread the...
Recommendations for an Adjustable Ball Mount with Multiple Balls and Height Adjustments
OK so I am trying to decide how much rise / I want with my ball mount. I have read all your articles on how to determine what I need for a given trailer. But the reason I am purchasing an adjustable ball mount is to cover all trailers that...
Comparing Equalizer, Fastway e2, Reese Steadi-Flex and Reese SC Weight Distribution Systems
Im considering a weight distribution system. My tongue weight is 400 lbs. Your thoughts on Reese RP66151, Reese 66558, Fastway FA94-00-0600 and Equal-i-zer EQ37060ET. For Toyota Highlander SUV. | The Equalizer system part # EQ37060ET of the...
General Height Rule for Setting up a Weight Distribution System
I trying to get the optimum settings for my weight distributing hitch and travel trailer, I have tried several different settings with the following results, I would like some advice on which is the best option to go with. stock weight of tow...
Weight Distribution System Recommendation for Pole Tongue Trailer that Weighs 5,400 lbs
I have an Ice Castle House that is a single pole tongue and the weight of the unit is approx. 5400lbs. I pull this with a 1/2 chevy pickup. What system would you suggest for my application? I have the air bags as well on the truck. Another...
Recommended Trailer Hitch and Weight Distribution System for 2004 Ford Crown Victoria
Please direct me to info on changing my stock 2004 Crown Vic to pull a large trailer and a loaded car with a total of about 4500 pounds. I understand a Police Interceptor would be better suited for this. Thank you | For your 2004 Ford Crown...
Is There A Weight Distribution Hitch Compatible w/McHitch On Obi Dweller 13 Pulled By 2022 Gladiator
I have a McHitch on my Obi Dweller 13, towed by my Jeep Gladiator Rubincon. Will this WDH work Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW Item # FA94-00-0800 | With the McHitch on your Obi Dweller...
Replacement L-Brackets for Fastway Weight Distribution System
Do you carry parts for fastway friction away L bracket parts | Yes we do have replacement L-brackets for Fastway weight distribution systems like the part # FA93-02-5150 for the l-bracket, part # FA92-03-9205 for the L-pin, and part # FA93-02-5350...
Recommended Weight Distribution/Sway Control for Small 3500 lb GVWR Trailer Trailer
Hello etrailer! I’m looking for a weight distribution system to tow a 2016 Starcraft AR-One Series M-16BH camper. I own a 2017 Hyundai Santa Fe SE V6. Do you have any recommendations? I’m new to all of this. Thanks! | Given the 3500 lb GVWR...
Keyed-Alike Trailer Coupler Locks
I would like two k is if it would fit any other couplers mine are all the same but one is diffent so Im looking two ha e one key that can go two 5 diffent trailers can this work or no if I supplied my own locks and one key | WE have many coupler...
Weight Distribution System for a 2014 Jeep Wrangler with 3 Inch Lift
Hello, I have a 2014 Wrangler with a 3inch lift. The current hitch I use is a 8inch but the jeep sags to much in the rear. I am thinking about going with a WD setup and an 8inch drop. My trailer has a tongue wait of 525 when loaded including...
Recommended 1,000 lbs Spring Bars for Fastway e2 Weight Distribution Systems
I have a fastway 800lb hitch for a travel trailer that has a tongue weight of about 850lbs but the trailer weight is 7350 is this the correct hitch and bar setup or should I upgrade the bars to the 1000lb bars due to the hitch weight? | Tongue...
Troubleshooting Vehicle Sag After Installing a Weight Distribution System on a Ford E-350 Van
Have a Ford E-350 w/ extended box van. Installed your e2 hitch 800# round bar. Everything installed perfectly, but I didnt anticipate correctly the weight that would be aft of the rear axle. Now the whole rig is not level and sags at the hitch....
Is Fastway FA94-00-600 Too Overrated for 2023 Coleman Rubicon 1200 RK?
I have a 2023 Coleman Rubicon 1200 RK. I pull it with a Fastway e2 94-00-0600. Limited travel so far, but I have not had issues turning or backing up. There is some slight trailer bounce when I look in rearview mirror, but I dont feel anything...
Availability Of Cover For Trailer 7-way Connector To Keep Water and Debris Out
Do you sell a cover for the loose non-mounted end of 7-pin connectors, to keep water out? Thanks! | We sure do! You will need the Fastway Tethered 7-Way Trailer Connector Cover with Tether # FA82-00-3315 which will slide over the open end of...
Filter Your Search
Contact and Help