!Cherokee Alpha Wolf Travel Trailer  x   >   !Impala  x   >   !American Freedom  x   >   Wheel Masters  x   >  

I installed the stainless flexible tire valve extenders on my dually rear wheels but the hose is a little snug for the outside wheels. Can I install an additional 90 degree extension in series with the flexible hose that has a 90 on the end...

Need rivets to repair | While we do not have a specific rivet repair kit for the Brophy Camper Scissor Steps, # AS03, we do have the Rivet Gun # PT99ZR and Replacement 1/8" Rivets, # WM9026-40 available. |

The quantity says 1. Is that a single mirror, or is that one pair? Im a little confused. | Ordering the Wheel Masters Extendable Towing Mirror, part # WM6600 would provide you with one mirror. If you wanted one for the driver and one for the...

Hi I need help choosing the correct “Wheel Masters 4-Hose Inflation Kit” Thanks | Items like the Wheel Masters 4-Hose Inflation Kit # WM8001-135 are not something that we can determine just from your motorhome information. The correct kit is...

On the Wheel Master Eagle Vision Universal Extendable Towing Mirrors VM6600-2 I was wondering is the 17 extension measured from the door to the centerline of the mirror or to the furthest edge of the mirror? | The measurement of 17" is from...

Can you supply a replacement nut cover for P/N Dicor V160FOLNC Single Lug Nut Cover Thx | I found your Dicor V160FOLNC lug nut cover, and while we do not have a direct replacement we do have something that is pretty close that should work. Check...

Will you be offering a towing mirror for the Lariat F-150? | We offer a set of two custom-fit towing mirrors from Longview, part # LVT-2300-C, that will fit your F-150. These fit manual mirrors, powered mirrors with heat and powered mirrors...

Do these work on a ford with factory internal TPMS? Thanks | Yes, the Wheel Masters 4-Hose Inflation Kit # WM8001-135 is compatible with a TPMS system like what you have on your Ford motorhome chassis. |

how long are the extenders | I spoke with my contact at Wheel Masters about valve extensions # WM8007. They measure 7 inches from the end that attaches to the valve stem to the start of the threads on the other end. I made a picture showing...

Have a 2000 Tiffin allegro bus on Freightliner chassis with 22.5 wheels. Need lug nut covers in tin not plastic. | The lug nut cover part # WMRMT9061 is made from stainless steel and could work if you have a 20 mm lug nut on your wheels like...

Just curious what is the max psi these valves can hold | We've checked with Wheelmasters in the past and they have told us their valve stem extenders like the part # WM80292 are rated for up to 160 psi. |

will these mirrors fit a 2012 Nissan pathfinder? | Yes, the Wheel Masters Eagle Vision Universal Extendable Towing Mirrors # WM6600-2 do fit your 2012 Nissan Pathfinder. They attach at the top and the bottom of the door. I also attached a review...

the front wheel cover that I have has six nut covers attached to the cover the other two are for the screw nuts that hole on the cover to the wheel. I have several nut covers that are dented and I would like to replace them. I f I remove the...

class C rv E-450 with 16 in wheels. I need to find a removal tool to get the wheel liners off the rear. Do you have them? Its a t-handle with a cover that fits over the lug nut Cap. | While we do not have a T-handle type tool, we do have...

I have a 2001 Coachman Aurora Motorhome with 19inch steel wheels! They are covered with chrome wheel covers that have two chrome false covers that unscrew to remove the covers, They look like lug nuts. Will your tool grasp these nut covers sufficiently...

I have a 2020 ram 4500 with wheel simulators on it. The hand holes on the simulators are much smaller than the actual ones in the wheels so you cant really inflate/deflate the tires very well. Can you recommend what I will need to put extensions...

I have a 2012 Ford F450 Super Duty chassis on my Winnebago Access motor home. I need to obtain the correct tire valve extender and bracket to replace a missing one, for the inside duals. Photo attached of the current one, I have 16” wheels....

Is the 45 degree a better option than the 135 degree on ford transit 350 he dually outside tire? | This will generally depend on the wheel on your vehicle and we don't have specific fits for individual vehicles in this case. I personally like...

Im almost positive that these will fit my Ford E350 chassis motorhome, but can you tell me the height of the cover, just so I can be sure? Thanks, | I ran out to our warehouse to measure the height of the Wheel Masters Lug Nut Covers # WM8011...

Im looking for two replacement jam nuts for my wheel liners. These look like the correct ones but I want to make sure before ordering. They are for my HR Vacationer, on the Workhorse chassis, 22.5 inch wheels with the WM9072F Namsco wheel covers. If...

Will this fit a 2017 F-150 ? Replacement Wheel Master Lug Nut Cover for Wheel Liner - Qty 1 Item # WMRMT9061 | In order to determine if # WMRMT9061 will work for your 2017 Ford F-150, you'll need to measure or remember what size socket you use...

wm 8011 fit a 2006 f 350 dually 4x4 with aluminum oem wheels and oem lug nuts front and rear | The Wheel Masters # WM8011 lug nut covers are designed for Ford 1-1/16 lug nuts, they're sold in sets of 8. |

Hello, I have a 2022 F350 XLT dually pickup with alum 17 inch rims on the outside duals. I am just looking for some type of valve stem extenders for the inside duals that wont flop around while rolling down the road that are somehow secured...

Looking for a valve extension and stabilizer to fit my 2016 F-350 DRW - coming from the inner rear tire valve used with a TPMS cap. Thank you. | We have valve stem extension kits like the part # WM8001-135 which were designed for use with dually...