What Size Cutout Is Needed To Mount The Locking Floor Mounted Storage Box # M387FR?
What is rough opening to mount box | The Locking Floor Mounted Storage Box # M387FR will require a cutout of 27-3/4" x 18-7/8". |
Is The Locking Floor Mounted Storage Box for Enclosed Trailers # M387FR Waterproof?
Is the unit water proof of does water get into box | The Locking Floor Mounted Storage Box for Enclosed Trailers # M387FR is not waterproof. The latch and lid were not designed to be waterproof as it is to be mounted inside an enclosed trailer....
Ramp Door Spring Assembly For a 8' Ramp Door on Cargo trailer Weighing 90lbs
What size spring assembly do I need for a 90lb. 8ft ramp door for a cargo trailer Door weighs 90lb on a bathroom scale when lowered | The Ramp Door Spring # M354FR is our closest setup for your cargo trailer door. This system is rated for a...
How are the Torsion Ramp Springs Weight Capacities Rated
The 160 lbs capacity this unit is rated for is that total ramp weight or one end weighing 80 lbs? | The weight capacity of the Enclosed Trailer Ramp Spring # CB250D96SHD that you referenced is the capacity of the spring as a whole. It wouldn't...
How To Choose the Correct Dual Ramp Door Spring for an Enclosed Trailer
I have a duel spring trailer ramp door spring assembly that I am trying to replace on my enclosed trailer. At what points on the spring assembly do you measure to get the correct length? | In order to replace the ramp door spring on your enclosed...
Wider Trailer Ramp Spring Recommendation for Toy Hauler
I need a ramp door spring for a toyhauler camper.It measures 74 1/2 inches from the outside of the mounting brakets that are around the bar.What procduct do I need?Thanks | The dimensions you listed for your ramp spring door mounting brackets...
Replacement Drum Compatible with Conventional Trailer Ramp Door Spring
Will DRUM-M-3LH fit on this: Conventional Ramp Door Spring for 8 Wide Enclosed Trailer - Single Spring - 150-lb Capacity - 362SA8 I need two drums on one side for my application. Thank you. | Replacement Drum for M-3 Dual Ramp Springs - Left...
Overhead Ramp Spring for Use with 80 Lb Trailer Ramp
Ive got a 6x10enclosed trailer the door was made for motorcycles its heavy would the 80# spring just one be enough its all I can do to pick it up and shut by my self should I go with 120# spring Im starting from nothing doesnt have any thing...
Can a Trailer Ramp Door Spring System Be Used on a 12 x 16 Foot Building
IVE BEEN TRYING TO DO RESEARCH AS TO WHAT TYPE OF LIFT SYSTEM WOULD BE BEST FOR MY NEW UTILITY BUILDING. MY BUILDING IS A HAND MADE 12foot X 16foot SIZE AND MADE HD ON SKIDS. THE LARGE LIFT DOOR I HAD MADE OUT OF LAYERING 6 SHEETS OF PLYWOOD...
Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
Could I please get a copy of the installation instructions for the #CAB1-8CB150 cables if you have them. Thank you | The installation instructions for this product are recommended for individuals who have experience winding torsion springs....
Ramp Spring Recommendation for 92 inch Wide that Weighs 200 lbs
will the 362sa8hd work on a 200lb door with a 92inch opening? if not, what spring willl work? I currently bought the 250 duel spring and when the tension is set for the door to stay down, it will not wind all the way up. | Your door is a little...
Are Mounting Brackets on Enclosed Trailer Ramp Spring # CB250D96SHD Adjustable
Ive just purchased a new 8 foot wide trailer and would like to upgrade to the double spring for safety the ramp door is HEAVY. There are brackets welded to the frame where the weld points are 83 inches apart. Is there any adjustability in the...
Troubleshooting Ramp Door Spring Not Opening Properly After Snapping Cable with Reinstall
had a cable come off. Got new cable on reattached and tightened spring. door opens about a 1 1/2 and stops?? | Sounds like the torsion spring of your ramp door assist hasn't been wound properly and that's why the door isn't opening properly....
What is the Torque Specifications for Heavy Duty Trailer Ramp Spring # RS16933RH
What is the torque rating on these springs? | Ramp spring # RS16933RH is designed for heavy duty equipment trailers and it is rated for 2K torque rating. The matching left side is # RS16933LH. For light duty trailers these springs would be...
Ramp Spring Recommendation for Enclosed Trailer that is 8 Feet Wide
I need an Enclosed Trailer Ramp Spring - Dual Spring. My trailer width is 8ft. The door width is 7ft. What spring setup do I need? | For an 8 foot wide trailer you'd want to go with the ramp spring part # CB250D96SHD which is exactly 8 feet...
How Many Turns of Spring is Recommended for M-3 Enclosed Trailer Ramp Spring # ERS120D81
How many turns of the spring is recommended for this when installing? | I checked with M-3 and when you are ready to wind the spring on the Enclosed Trailer Ramp Spring # ERS120D81 you will need to use two 1/2 inch diameter bars (of around 18...
1990 Kingston Trailer Ramp Lift Assist Options
Hi I have a 1990 Kingston horse trailer ramp load that I believe the spring under the ramp needs to be replaced. the ramp feels unusually heavy to lift once its down and I wouldnt be able to lift it in emergency if I had a horse in the trailer....
How To Wire the Exterior LED Utility Light Part M337FR
Could you tell me the wiring of the lights | The Exterior LED Utility Light part # M337FR has three wires, one for power, one for ground, and one for neutral. I spoke with M-3 and they informed me that the light follows EU Wiring Specifications...
Will Replacement Drum For Trailer Ramp Springs Work On 2006 Haulmark Trailer
My cargo trailer was manufactured by Haulmark in 2006. The unit is a wide body enclosed 20foot with rear cargo door. The markings on our unit dont match up with this unit, but maybe it doesnt matter. Could you provide an answer on whether...
Replacement Springs for Ramp Door on Continental Cargo Enclosed Trailer
I have a 20x8.5 Continental Cargo enclosed trailer with the overhead springs and cables on the rear ramp door. I use the trailer daily, and open the door 20+ times each day. The cables seem to wear and fray relatively quickly. Today, the right...
How to Pick Out Replacement Cable Length for Trailer Torsion Ramp Spring
How do you figure out what length of cables I need for a 6x12 enclosed trailer with a rear ramp the spring is there and works but when I purchased it it needed cables | You would want to measure from the bottom of the ramp door all the way up...
Availability of Enclosed Trailer Ramp Spring Like # CB250D96SHD With 300-lb Lift Capacity
Hi, I have a Isuzu Van that we have retro fitted a rear tailgate/ ramp system. At the moment we have a sketchy winch that lifts and lowers it. I would like to put a garage door spring on it like whats listed on your web site. Do you stock a...
Availability of Bushing/Bearing for M-3 Dual Ramp Springs
Hey,I just bought some drums for my spring on my enclosed trailer and I’m having a an issue with installing it. I believe I have found the issue. Do y’all sale the bushings separate from the spring mount? | The Replacement M-3 Universal Mounting...
Dimensions For Trailer Ramp Spring On 18 Foot Haulmark Trailer
WHAT SIZE SPRING GOES ON THE RAMP DOOR FOR THIS TRAILER 18FT HAULMARK TRAILER | You will need to measure to be sure, but I believe the Enclosed Trailer Ramp Spring - Dual Spring, 81" Wide # ERS120D81 will fit your 18 foot Haulmark Trailer and...
Filter Your Search
Contact and Help