Result: fitting

The right part depends on your leveling system: # RV24FR fits standard 2" square jack legs, # RV57FR fits standard 2" round jack legs, # RV34FR fits Lippert Level Up and Lippert Titan systems, and # RV84FR fits Equalizer systems with 12" round feet. |

Slipper spring, Item # SP-177275. Will this fit a Harbor Freight 4 foot x 8 foot folding trailer? | Slipper spring, Item # SP-177275. Will this fit a Harbor Freight 4 foot x 8 foot folding trailer? The current springs are about...

Can you recommend what parts would fit? I found a CE Smith 1800lb axle that would fit but I could not find a compatible hub assembly for the 8” tire. | I am refurbishing a small boat trailer that needs...

The difference is the jack leg shape. The # RV24FR fits standard 2" square leveling jack legs, while the # RV57FR fits standard 2" round leveling jack legs. | What is the difference between RV24FR and RV57FR?...

I cant seem to find anything that fits, not sure if the 30 inch flat ends would accomodate, or the reversed upper facing hook style ends can fit there. | I need to replace a pair of 4 leaf Slipper Hanger springs...

We have a few options that will fit, but we need to pick out the spring that matches the capacity needed for the trailer. | Im repairing my Dads Cox boat trailer. I need to replace the leaf springs. They are app. 24.5in...

You'd have to move your hangers to allow this to fit though. Your size is an unusual one and not something we have. | Hello, I am looking to purchase new leaf springs for my canoe trailer. Breadth between eyelets is exactly...

Is there a heavier spring set that fits in the same brackets and bracket spacing? Thanks | Hello, I recently received and installed your leaf springs SP-177275 on a chassis for a tear trailer Im building. The shell is feeling...

This axle has the brake assemblies and hub and drum assemblies already fitted, so you will just need to assemble and install. | Hello, My pop up camper has a Dexter Axle, Tag Reads: Dexter Axle P- 11 Model SLR Can...

how thick is the leaf pack so I can determine if my current u bolts will fit.I currently have 2 leaf 500# each springs | how thick is the leaf pack so I can determine if my current u bolts will fit.I currently have 2 leaf 500#...

Can the bushing be replaced to fit 1/2bolt? and do you have the needed bushings and bolts 3? | Do to the design of trailer frame,I need to use a half inch bolt. Can the bushing be replaced to fit 1/2bolt? and do you have...

Hanger Kit # APS1 works with 1-3/4-inch wide leaf springs like # SP-210275. U-Bolt kit # APUBR-1 fits your 2-3/8-inch axle as does Spring Seat # TRSS238. | Providing my axle is 2 3/8 are these the parts I need to mount it?...

Yes, the 4-Leaf Slipper Spring w/ Radius End # SP-179275 that you referenced will fit and work well on your trailer that currently has flat slipper ends. | I have a utility trailer with a load capacity of 1360 lbs that has...

You might need longer U-Bolts as well to fit the larger 6-Leaf 12K # SP-269275 leaf springs. | Weak springs on a 20+5 gooseneck trailer used on a farm Is their a way to upgrade 5 leaf 2 1/2 inch wide springs for 10k axles...

These are the ones that I think will fit, but the springs on my current trailer are stacked 4 high and are flat at the bottom, not rounded off. | Hello, I am currently trying to find leaf spring replacements for my Continental...

We have the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-G-EZ-1K which fits a BT8 straight spindle which is 1" in diameter or a Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-G-EZ-2K which fits a BTR straight spindle which is 1.063" in diameter. |

The springs are 24 inches long pin to pin and have an open hook on both ends. they are double leaf. Do you have any to fit this? | Hi i have an old Cox trailer for a 13 foot Boston Whaler. The springs are 24 inches long pin...

Just want to know if I should add a bolt with grease fitting or without. Also is there anything around sleeve such as rubber/poly like a normal press in bushing. | Can I add a grease bolt to this? Is the sleeve of bushing metal...

Do you have springs that would fit my application? Thank you. | I have a boat trailer with a 5000 lb gross capacity. It has 30 inch slipper springsmeasured while still attached from center of bolt to end of slipper . 3 leafs...

Which RVpaws pads fit my Equalizer leveling system? | Which RVpaws pads fit my Equalizer leveling system? | Hi Robert! For an Equalizer leveling system, you’ll want the RVpaws V2 Premium Articulating RV Jack Pads # RV84FR. These...

The # SP-113275 I listed has a flat length of 25-1/4" which is probably closer to what you have now and a better fit than a leaf spring like # e66SR. | Hello - Im replacing the axles and suspension on my trailer from 1987...

Are there any available that will bolt up and fit? The label says Dexter Axel P-16 SLR sn D 6671796 Thank you | I have a trailer with two 3500lb Dexter torsion axels. I’d like to replace them with a higher capacity axel....

The current leaf springs on my trailer have the bolt threaded up from the bottom in order to fit on the trailer axle. | Can the center bolt that holds the 3 leaf springs together be turned over? The current leaf springs on my...

Do you carry ones that would fit? Thank you in advance, | Hello, I am looking for a set of 2,000 lbs leaf springs for my Keystone trailer identified in the subject line. Do you carry ones that would fit? Thank you in advance,...