Hitch and Ball Mount Compatibility on 2010 Pontiac Vibe
of the tapped holes. Problem: The ball mount - a replacement - hits a stop on the way in and I cannot put | Hi, I put my receiver on my 2010 Pontiac Vibe over the weekend. Easy, once I cleaned the rust out...
Hitch Balls that Fit Curt Ball Mount # C45521
For the Curt ball mount # C45521 you mentioned you'd want the part # A-82 for a 2 inch ball or part | I bought this from you, but bought the wrong ball for it. Which ball fits this? Curt Class...
Ball Mount and Wiring Recommendation for Draw Tite Hitch that Fits 2005 Pontiac G6
The Draw Tite hitch part # 36426 that you referenced does not come with a ball mount but we do | Does this come with a receiver? If not what receiver size does it fit? | The Draw Tite hitch part # 36426 that...
Is a 2 inch or 2-5/16 inch Ball a Standard Size for a Hitch Ball
recommend a Hitch Ball with 2 inch Diameter and Medium Shank, part # 19247. If you need a ball mount | We are picking up this camper from Florida and need to know the ball size of this camper....
Will My Hitch Ball Fit the Curt Class II Round Tube Trailer Hitch on my 2004 Pontiac Vibe
hitches are tested and rated with the specific ball mount for that hitch. Using a ball mount | Does this hithch come with a hitch-ball? I already have a U-haul hitch-ball I...
Where Does a Curt Trailer Hitch Install on a 1999 Pontiac Grand Am
some towing, the hitch comes with the correct ball mount, pin, and clip. For a 1-7/8 inch ball, you can | does this hitch get mounted on the bumper or on the frameof the car? | The short answer...
2 inch Hitch Ball Recommendation to Use with Ball Mounts 3593 and C45025
Helo, If I buy this drawbar #3593 or c45025, with hitch ball do I need to buy I need a 2inch | Helo, If I buy this drawbar #3593 or c45025, with hitch ball do I need to buy I need a 2inch ball, but I dontt know the diameter...
Trailer Hitch & Related Items for 2009 Pontiac Vibe
. An installation video for each hitch is linked. The recommended ball mount to use in either hitch is part # C | will hitch C12221 fit my 2009 Pontiac Vibe? | Yes, the Curt 1-1/4-inch Class II hitch # C12221...
What Ball is needed for a 1-7/8 Inch Trailer Coupler with the Class II Hitch on a 2009 Pontiac Vibe
The hitch ball for your ball mount will need a 3/4 inch diameter shank. You can use the Hitch Ball | which ball do we order with this hitch when the trailer uses a 1 7/8 inch...
Will Draw-Tite Hitch # 36426 Fit 2009 Pontiac G6
. If so, you will need a ball mount. I would recommend Class II ball mount with 3-1/8 inch rise, part | Im looking to put a hitch on my g6 but its a 2010, looking at the pictures...
Drawbar for Trailer Hitch of 2005 Pontiac G6
the drawbar/ball mount you'd want would be the # 36065. Then for a hitch ball you'd want the part # 19258 for a 2 | What draw bar would fit a 2005 pontiac g6? | For the Class II hitches that...
Trailer Hitch fit for a 2008 Pontiac Grand Prix GXP
for the GXP models of the 2008 Pontiac Grand Prix so it would work well on your GXP model. For a ball mount | Will this hitch fit the gxp model? | I checked with Curt and they do not have any fit exclusions...
Trailer Hitch and Wiring for a 2002 Pontiac Aztek
accessories. But if needed I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount | Is this hitch compatible with the 2002 Pontiac Aztek. It came up on the...
Trailer Hitch Recommendation for 2002 Pontiac Grand Prix SE Sedan to Tow Small Trailer
want the Tekonsha kit part # 18252 for a 4-way. Then for a ball mount you'd want Curt ball mount part | Hello just bought my first car and summer is coming up I saw a little...
Differences Between Class I and II Trailer Hitches Available for 2009 Pontiac Vibe
, but the properly sized ball mount and trailer ball are sold separately as part # 19256 for a 1-7/8 inch ball | Is there much difference from drawtie class 1 and class 2 hitches.I...
What Base Plate Do You Recommend for My 2005 Pontiac Vibe?
comes with a 3-year warranty. If you need a ball mount for your towing vehicle, I recommend the Curt | Have a 2005 Pontiac vibe. Looking for a base plate for it | For a great quality base plate for your 2005...
Trailer Hitch Fit and Towing Capacity for 2009 Pontiac G6
overall capacity. A hitch installation video is linked for you. Towing also requires a ball, mount | I need to install a receiver hitch to my Pontiac G6 2009. I saw that this model is the one for this car: 36426...
Hitch Recommendation for an All-Wheel-Drive 2003 Pontiac Vibe
: Trailer wiring # 118458 (install video attached) Ball Mount # 3593 1-7/8 inch ball # 19256 2 inch ball | Can I use it on all wheel drive model ? | The Draw-Tite Trailer Hitch...
How To Determine If 2009 Pontiac Montana SV6 Has Long Or Short Wheel Base
with your vehicle you will also need a vehicle wiring harness # 118396, and a ball mount. I have included | Hello, I have a 2009 Pontiac Montana SV6, and I do not know if I have regular wheel base, or extended....
Hitch Lock and Anti-Rattle Device Recommendation for Curt Ball Mount # C45015
Since the shank of the ball mount part # C45015 is solid you'd have to go with a standard hitch | I have the draw-tite class1 sport frame receiver hitch #24833 for my Pontiac Solstice GXP in combination with...
What is the purpose of the U-Shaped Block on Trailer Hitch 24613 for a 2002 Pontiac Sunfire
and for the vehicle capacities. The proper ball mount for this hitch and vehicle is # 3592. For a 1-7/8 inch ball use | Does this fit my Sunfire that is not a GT ? | The Curt Trailer Hitch...
Trailer Hitch, Wiring, and Accessory Recommendations for a 2003 Pontiac Montana
, I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball | Id like to know if the hitch #13344 will fit our 2003...
Draw-Tite 36288 Class II Trailer Hitch w/ Drawbar will Fit a 2001 Pontiac Grand Am SE Coupe
: Trailer wiring harness with 4 pin trailer connector # 119178KIT Ball mount # 36071 2 inch trailer ball | i have a 2001 grand am se coupe will this fit my vehicle | The Draw-Tite # 36288 Class...
Trailer Wiring Harness for a 1998 Pontiac Bonneville
recommend ball mount kit # 36061 which includes a pin and clip. For a 1-7/8 inch diameter ball use # 19257 | Is there a specific wiring hook up for the 1998 Pontiac Bonneville? I already have...
Filter Your Search
Contact and Help