Needing a Replacement Trailer Tongue Ball Plate for a Husky Friction Sway Control
i have a huskey sway bar with a 6 hole ball mount and will need a new ball mount, the sway bar part | i have a huskey sway bar with a 6 hole ball mount and will need a new ball...
Replacement Trailer Ball/Plate for Friction Anti-Sway System
I have an easy lift sway bar and need the ball that mounts to the trailer. Will one that you show | I have an easy lift sway bar and need the ball that mounts to the trailer. Will one that you show work with...
Friction Anti-Sway Bar Ball and Plate Location on Trailer Tongue
How high to mount plate on trailer tonuge? | How high to mount plate on trailer tonuge? | The Replacement Ball and Plate Assembly for Husky Sway Control System # HT34842 should be centered on your trailer frame in most situations....
Can you Tow a Travel Trailer with a 2017 Chevrolet Silverado Without Using Weight Distribution Bars
system and using a ball mount like part # EBMK4 will be enough to get your trailer that two miles. I've | Can I tow my 5177lb travel trailer for a short trip about 2 miles to storage without using the weight...
Replacement Boat Trailer Channel Mount Coupler for 2 inch Hitch Ball Availability
Hi, I have to replace a broken trailer coupler for my Hustler boat trailer. The ball is 2 | Hi, I have to replace a broken trailer coupler for my Hustler boat trailer. The ball is 2. The model number is HLT13-1752. Will...
Which is Better for Ball Mount Height, .5 inch Too High or .5 inch Too Low
If you are referring to the hitch ball height relative to what would allow the trailer to be towed | i can either get it .5 inch low or .5 inch high, which one do you recomend? | If you are referring to the hitch ball height...
Replacement Sway Control Bracket for Friction Sway Control Arm
If you need a mounting screw for a ball plate assembly like the one in kit # 83660 you can use part | I had a minor incident in which I sheared off the built in bolt associated with the left away control bracket...
Recommended Weight Distribution System for 2018 Coleman Lantern Trailer
of trailer brakes. My biggest concern is that the propane tank is mounted close to the ball | I have a 2018 Pilot and a 2018 Coleman Lantern LT 17RD 21 1/2foot 3,200 lb trailer. I have not pulled it at all...
Replacement Head and Hardware For Husky Center Line Weight Distribution System
and the hardware are sold separately I will also list those. For the ball mount you will need part # HT32336 | Do you provide the hitch head and shank ONLY for Husky Center Line Weight Distribution w/Sway Control...
Pro and Cons of Air Bags Versus a Weight Distribution System for a 2018 Jeep JL Wrangler
Control - Includes Ball Mount/Hitch Ball - Lifetime Warranty Weight Distribution System Cons | Pros and cons for using air suspension or wt distribution for towing a 2000 lb travel trailer...
Height Settings of the Andersen Ultimate Connection 5th Wheel Trailer Hitch 3200
I need 1.5 inches more in height, I have the ball mounted in the third hole, it will still scrape | I need 1.5 inches more in height, I have the ball mounted in the third hole, it will still scrape the top...
Is a Weight Distribution System Needed for a Forest River Shamrock M-18
is spinning.If I upgrade to a WDH can I still use my adjustable ball mount with it? Can the WDH be attached | I recently purchased a 2002 Forest River Shamrock M18 to try out the camper life before going all...
Placement Of The Frame Brackets On the Husky Center Line Weight Distribution System
. The inside frame dimension to the ball hitch is right at 30.5. Will the width of the frame brackets be too | Some of the hardware dimensions arent given, so Im struggling to see if this will fit. Im doing a cargo conversion...
Husky Brute Electric Trailer Jack Dimensions And What Sets It Apart
to replace my current oem camper jack and was wondering if this model is long enough below the mounting plate | I have a 7inch A-frame with about 6-3/4inch between upper and lower jack supports. I need to replace my current...
What is the Tongue Weight Compatibility of the Husky Center Line HT32218 Weight Distribution System
would be 1000-lbs. This system's trailer frame lift brackets will mount on the frame approximately 29 | What is working tongue weight range for Husky HT32218 Center Line Weight Distribution | Weight distribution systems like...
Pole Tongue Adapter for Husky Center Line Weight Distribution System
brackets from all manufacturers that mount approximately 30" back from hitch ball. Since your Husky Center | Can you recommend a pole-tongue adapter that would be compatible with the Husky Centerline 32215...
Replacement Parts For Fulton Straight channel Coupler For 1-7/8 Inch Trailer Ball
could tell me if Repair Kit for Husky Channel Tongue Trailer Couplers - 1-7/8inch Ball - 2,000 lbs | Hello I have a trailer that has a Fulton 1 7/8 coupler and the latch broke. I was wondering if you could tell me if Repair...
Replacement Head for Husky Weight Distribution System
with the ball and all mounting hardware, but will it work with all the components of the 30849 system | I purchased the Husky 30849 weight distribution system and would like to get a second head to mount on...
Will a Reese Weight Distribution Shank Work With a Husky Weight Distribution System
I have a HUSKY class 3 trailer hitch for my 2015 Cadillac SRX. Can I use any class 3 REESE ball | I have a HUSKY class 3 trailer hitch for my 2015 Cadillac SRX. Can I use any class 3 REESE ball mount for this? | I think what...
Regular Straight Tongue Trailer Coupler to Replace Atwood 6K Hydraulic Brake Actuator
you could go with # HT87076 which also fits a 2 inch ball, fits a 3 inch tongue, and has the mounting | I have 84132 actuator on my trailer right now but have removed the hydraulic brakes and went with electric....
Fifth Wheel Install Rail/Bracket Kit for 2013 Ram 2500
Are you needing a Gooseneck Hitch which provides a 2-5/16 inch ball mounted in the truck bed | I would like to purchase a bed rail kit for gooseneck. NO DRILLING. Ram 2013 8 ft box 2500 4 door 4x4 5.7L. I...
Can Husky Center Line Frame Brackets be Mounted 1/4 Inch Outside of the Specified Range
inch to 30.5inch from the center point of the tow ball. I had to set mine at 30 3/4inch Is this extra | Question, On the Husky Weight distribution setup, it calls for the L brackets to be between 28.5inch to 30.5inch from the...
Is Weight Distribution Needed for a 2013 Toyota 4Runner Towing a 2015 Forest River Wolf Pup 16BHS
are much less likely to interfere with anything mounted on the tongue. I did some research on your trailer | I am buying a 2015 Forest River Wolf Pup 16BHS. Dry weight is 2,900 lbs. Tongue weight is 417 lbs. I am pulling it...
Compatibility of Reese # RP30845 Elite Series Gooseneck With Above Bed 5th Wheel Mounting Rails
with under bed rails only. If you have above bed rails, you'd want to use the # HT31368 gooseneck ball you | Hello. I am trying to find out which rails I need for a Elite series RP30845 gooseneck hitch. I want above bed rails....
Filter Your Search
Contact and Help