Ford  x   >   2017  x   >   !1988  x   >   !Gulf Stream  x   >   !1960  x   >   Fastway  x   >  

Hi....looking to tow a 2317 Rockwood with a ford flex ecoboost. Dry hitch weight of 300 and trailer is 2800lbs dry. Ive been told the 450 from local dealers but its advised on etrailer with similar specs that the 600 is the way to go....

I need to tow a travel trailer with a 2017 F150 that can tow up to 11,800 lbs. I MUST be able to back up approximately 90 degrees from truck to trailer. My tongue weight will be up to 600 lbs, and tow weight up to 7,000 lbs. Can you recommend...

Deadbolt locking pin rh5 xl - Do they offer these keyed alike pins in different lengths? I have a fastway e series flash drawbar with a 2 1/2” shaft for 2017 Ford F-250. The pin for the ballholder needs to be longer. 4 1/2” gap I believe If...

If I order more than one of these will they be keyed alike? I do not see an option for keyed alike on the page. | Yes the Fastway Universal Coupler Lock # FA86-0015-309 are going to be keyed alike. This will be keyed to the Fastway Key # FA-KEY-309...

Hi, Well Im glad I did a little bit more searching! I was looking at a Fastway E2 450 weight distribution hitch for my 2516 Rockwood being towed with a 2017 Ford Flex EcoBoost. But I have found out that I need a hanger kit as the a frame of...

Will this fit a Hopkins breakaway controller? | The only replacement pin I can recommend for a Hopkins breakaway kit is the part # HM20012. If you wanted the coiled design of the Fastway kit you'd need to replace the switch too with the part...

Do you have anything to help for a 2 wd application 2017 Expedition EL. Towing a 6700 lb . trailer | I may have a solution to help with the sag you're experiencing on the rear of your 2017 Ford Expedition with 2wd while towing, but there is...

I have a Roadmaster 9100 braking system on my 2017 F150. I want to install a breakaway switch. I have the cylinder and just need the switch and cable. Would part # FA80-00-2060 work? Thanks. | If you have the rest of the breakaway system...

What stays attached to the truck and what stays on trailer ? Do you have to disassemble the whole thing to unhook ? I dont get it. Basically what do I have to do each time I unhook or hook up ? | In regards to the Fastway e2 Weight Distribution...

I have a 2017 ford f250 and will be towing a 28 travel trailer, 7450 gross weight and 650 hitch weight. what is the right weight distribution hitch/anti sway? Thanks | I would be happy to recommend a weight distribution hitch for your 28' travel...

Hi I recently asked a question about the Fastway E2 600 being good enough for my trailers 300 pound hitch weight......made a mistake....My new trailer is now going to be 400 pounds in tongue weight dry. I am assuming that the Fastway E2 600...

Can I use a 2 inch hitch ball with fast way e2 92-00-0800. If yes, what ball do you recommend. Thank you | Yes, the Fastway e2 Weight Distribution # FA92-00-0800 can use a 2" ball. The only requirement is that it has a 1-1/4" diameter shank...

Will Item # BD580402 work on the new F250 three inch receiver hitches? If not, what do you have that will? | The lock you mentioned is designed for 2 inch trailer hitch receivers so it will not fit on your 2017 Ford F-250 with the 3 inch receiver. For...

want to buy flash e series adj ball hitch fa42002825. | We carry the Flash E-Series HD Ball Mount part # FA42-00-2825 that you referenced. This is an adjustable ball mount that can do either 8 inches of rise or drop designed for 2-1/2 inch...

I need a four inch drop to level my trailer. The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 6,000 lbs GTW, 600 lbs TW Item # FA94-00-0600 doesnt offer that big of a drop. Can I replace the Fastway shank with the C17124...

I have a 2107 Ford F-250 Super Duty Pick Up. It comes with a oversized hitch but includes a reducer to make it compatible to 2inch hitches. Is the locking pin long enough to go the hitch and reducer? Frequently I run into this problem. |...

I have a 2017 Ford F150 Lariat Super crew. The hitch is rated for 500 and 5000 without a weight distribution hitch and 1100 and 11,000 with weight distribution. At the time I purchased the hitch I understood the TW of the boat trailer I purchased...

It doesnt mention it specifically and the lack of a sizable gusset makes me wonder. Are shanks normally rated as supporting weight distribution or not? I have a Husky weight distribution hitch head assembly that I need a new shank for. | I...

I have a Fastway e2 14000 lb. Hitch. The round spring bars are only rated to 10000 lbs is this a mismatched system? | It looks like that capacity is for the shank so it's highly likely that the shank that originally came with the system didn't...

Just got off the phone with another expert. My truck has built in sway control. Its a 2017 F150. I am using a Equalizer E2 12,000 hitch. Supposed to have built in sway control on the hitch also. Trailer weighs around 8300 loaded. Experts...

I have a DM14976-52 and am interested in a coupler lock. I know that there are bolt trailer coupler locks, however I would prefer a coupler lock that would be similar to BLTL-20. Thank you | The most similar coupler lock we have to the # BLTL-20...

What is the length of the 2 inch receiver to hitch? I have a typical 8inch rise curt now and need a 10inch rise to level trailer are they the same length? | The distance from the hitch pin hole of the Flash Solid Steel Adjustable Ball Mount...

I need to purchase a trailer hitch I have 3 models Im looking at and would appreciate some expert advice. Thanks | It sounds like from your history on our site that you're looking for an adjustable ball mount for your 2017 Ford F-350. Of the...

Hello, I have a 2017 f150 super crew 4wd that I’m using to tow a 33ft travel trailer. Weight is around 8000lb with tongue weight about 850. I have the E2 trunnion style WD system rate for 10k I purchased 10k because it said it was also good...