Longer Shank Equal-i-Zer Weight Distribution Shank
Can you recommend a complete sway control & weight distribution system? | Do you know how much additional clearance you'd need to allow the tailgate to open? 12inches is a longer shank but we might have a slightly longer option. But if you need...
Recommended Universal Towing Mirror for 2017 Ford F-350
We have a 2017 Ford F350 that already has towing mirrors, but the passenger side mirror does not allow us to see the rear tires on a 30-40 ft. trailer. Is there an extension mirror that will give us a wider angle so that we can see those rear...
Availability Of 2-1/2" Shank For Weight Distribution Hitch
Hi, I have a 2017 F350 with the 2.5 inch receiver and want to ditch the adapter sleeves due to the extra play. Do you sell a 2.5 inch shank, and can I still use my head unit on my equalizer that is 2 inches? I wasn’t sure if the entire shank...
Offset 5TH Wheel To Gooseneck Hitch Adapter Compatible With Factory Prep/Puck In Bed Hitch System
I have a 2017 ford lariat with the factory installed Curt puck system in the bed, the ball looks simular to the Reese pick shown in one of your answers on this question. Not recommended for use with factory-installed towing prep packages which...
Weight Distribution System for Trailer with 8 Inch Tall Frame and 1,000 Pounds Tongue Weight
My trailer frame height is 8inch with a TW of 700-1,000 lbs depending on what toys I am hauling. What WDS will fit my frame height? I am looking for optimum ground clearance. | For your 8 inch tall trailer frame and up to 1,000 pounds tongue...
Hitch Extender for 2017 Ford F-350 With 3 Inch Factory Hitch
Good afternoon, I have a 2017 F350 long bed. I am looking to put a truck camper on the back that will only hang over approx 16-18.inch I have a factory 3 inch receiver on the truck. I have several different trailers that I would like to be...
Recommended 2 Inch Shank for Weight Distribution System that Came w/ a 2-1/2 Inch Shank
I recently purchased this product and it is working very well. I did get the 2 1/2inch hitch. Is there away to purchase just the part that goes into the trucks receiver hitch in a 2inch version. I have trucks that have the 2inch and 2 1/2...
Compatible Weight Distribution Systems for Torklift Cannon Hitch Extension
I have a 2017 F350 dually with an 1172 lance slide in camper. I have the factory 3inch ford hitch. I need to use a 48inch hitch extension. I see the cannon, however, I have a bass boat with a swing away hitch. it looks to me like the cannon...
Recommended Weight Distribution Hitch With Gen-Y Stacked Receivers 1300 Pounds Tongue Weight
I bought this and need a sway bar Do u sell a sway bar set up. Weight distribution with sway 1300 pounds tong weight more if water tanks 100 gallon are filled towing a 38 ft camper | I recommend the # EQ64FR Equal-i-zer Weight Distribution System...
Will the Curt Weight Distribution Shank Work On An Equal-i-zer Weight Distribution System
I need a replacement shaft with an 8 inch . I found the CURT 17132 Weight Distribution Hitch Replacement Shank, Fits 2-1/2-Inch Receiver, 8-Inch . Will my 1200lb equal-i-zer head fit on the vertical shaft? | Yes, the Curt Weight Distribution...
Does the Husky Center Line Weight Distribution System Come With a 2-1/2 Inch Shank
Is this available with a 2 1/2inch shaft? | I do have a 2-1/2" shank that can be used with the Husky Center Line Weight Distribution System part # HT32218, the Equal-i-zer Weight Dist Shank part # EQ90-02-4900 but the Husky Center Line Weight...
Best Fifth Wheel Towing Solution Recommendation for 2017 Ford F-350 with B and W Gooseneck Hitch
Hello I have a 2017 ford f350 shortbed with bandw turn over ball we just purchased a 2011 sabre fifthwheel camper that is already set up for the bandw goose neck ball. And people been telling us that this kind of setup is putting to much stress...
Recommended 5th-Wheel-to-Gooseneck Adapter for 2022 Montana 3231CK
I have a 2022 Montana 3231CK and want to get the convert a ball so i dont have to change out to use. i read on one of the QandAs that they arent suggested for cross country trips, how long of trips are they good for? should i keep my BandW...
How Do You Know If You Need Sway Control on a Trailer
I have moved up from a Tundra to a 2017 F350 pulling a 28, 6000# Travel Trailer. I kept my Equal-i-zer WD hitch, but dont get much squat now with the F350. I despise the 3inch Reciever and sleeves so I was thinking about the 3inch Weigh Safe....
TorkLift Trailer Hitch Receiver Needed To Use TorkLift SuperTruss Hitch Extension on 2017 Ford F-350
I have a 2017 F350 dually diesel with the factory hitch installed. I need to tow a 7,000 lb GVW trailer while carrying a pickup camper in the bed. I know I need the 48” supertruss extension but which hitch do I need? Can I use the existing hitch...
Largest Size Equal-i-zer Weight Distribution Shank for 2-1/2 inch Hitch Size
Do they make an 18inch shank in the 2 1/2foot receiver size? | The Equal-i-zer weight distribution shank we offer with the largest dimensions is the part # EQ94FR which is 12 inches long and is capable of 13 inches of rise and 9 inches of drop. |
Can Equal-i-zer Shank EQ90-02-4900 Be Used with Reese Trunnion Weight Distribution Head
Item # EQ90-02-4900: Will this shank work with the Reese trunnion weight distribution system? | The shanks for weight distribution systems, such as Equal-i-zer # EQ90-02-4900, use standard hole sizes and spacing (3/4-inch diameter, spaced 1-1/4-inches...
Filter Your Search
Contact and Help