Ford  x   >   F-350  x   >   Escort Wagon  x   >   2000  x   >  

What 5th wheel hitch is compatible with this C60720 gooseneck hitch? It is installed on my 2000 Ford F350 with 8 foot bed and I need to be able to tow both types of trailers. | If you want to use a 5th wheel hitch with your Curt Double Lock,...

Hello we had a Curt e16 and upgraded our trailer. We need a 20k-25k lbs support for our 2000 Ford F-350. Since we already have the rails installed we are trying to find a hitch that fits our rails. What would you suggest? | Since your Curt E16...

Is this a 3 inch pipe set up? | Yes, the MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF55323 is for a 3 inch pipe set up. It is a direct fit for the following: 2000 - 2001 Ford Excursion 5.4L V8 and 6.8L V10 Engine 2002 -...

At what point in install should alignment marks be made? After setting saddle and lower brackets on axle and against spring pack and aligning bottom airbag mounting hole? Also, why in step 5 do instructions refer to saddle bracket as “bottom...

I bought a RM 1139-165 Roadmaster rear sway bar for my 2000 F350 . I was wanted to know if you could recommend a end link set for it. My current Ford one is fine but I wanted to upgrade if Road Master makes one for my truck and RM 1139-165,...

I am just verifying that the RM-4139-125 will fit on the front 1.5” sway bar bushing on a 2000 Ford F-350, four wheel drive, dual rear wheel, 7.3L PU. | I checked with Roadmaster and the 4139-125 is not a fit for the factory anti-sway bar of...

Looking for front rear camper tie downs for 2000 f350 super duty dually for a 11.5 foot camper and not sure what product I need? Pocket tie downs state non dually? Please let me know what parodying need to purchase please. | For your 2000 Ford...

I was wondering if you have a pre-made oem connector for a primus iq 90160 to a 2000 ford f-350 super duty. Thank you. | We do have a wiring adapter that fits your Tekonsha Primus IQ and the factory port on your 2000 Ford F-350. What you need...

Hitch Mate Tire Step. I have a 2000 f350 cab and chassis and the front rims protrude beyond the tire since it can be used on the dually part of the truck as well. Would the tire step work for this type tire/rim? Thanks, | While the HitchMate...

looking for a weight distribution with anti sway bar kit that will work on my 10k enclosed trailer 1k tongue weight. the frame is 8 tall. i cant seem to find brackets that will support more than 6 thank you | Actually, if the # C17515 frame...

I have a 2000 F350 with a Airlift model 57215 kit installed. Is there an in-bed gooseneck hitch compatible with this Airlift kit? Looking at the details on your site for the AL57215 kit it says not compatible with in-bed hitches but another...

Hello, I need help finding the correct mounting plate for the trailer plug on set ITEM # 118243. I bought ITEM # C67UR but the hole pattern doesnt match up. If you can help me find the correct plate Id appreciate it. Thank you. | I would...

Ive got the same problem but on a 2000 F350. All fuses good under the hood #4, #8, and #28. So with all of that done I went to the trailer plug on the truck still no trailer running lights. Under the hood under the break booster on fender...

I’m looking to see which air bag set up would work on my 2000 f350 4x4 dually with the reese 5th wheel plates item 50043-6008. Thanks! | We do indeed have air bags that will fit your 2000 Ford F-350 4x4 with the Reese Fifth Wheel Trailer Hitch...

Part #CTA400. Im looking to see if you offer the bolt kit for the CTA400? Looking to keep them in my stock. | The hardware is pretty much standard for 3" channel coupler mounts like the Trailer Coupler - Adjustable Channel Mount part # CTA-400...

I have a 2000 F350 DRW, is there any way to put a hitch from a 2020 with the OEM puck system into my 2000? I have the B&W companion for ford OEM pucks 25k BWRVK3305 | Thanks for that info, and yes, you can transfer the B&W Companion OEM 5th...

What kit do I need for a 2000 f350 super duty dully | We have the Replacement Hardware Kit # 40-022PK for the Westin Sportsman Grille Guard Black # 40-0225 and Stainless 45-0220 that fits your 2000 Ford F-350 Super Duty dually. |

I just purchased a PD9130lv converter/ charger from etrailer.com and I have been researching how to install it to replace the current Magnetex 6332. My question concerns the blue wire labelled converter outputinch on the Magnetex conv. which...

What suspension enhancements are compatible with this C60720 gooseneck hitch for a 2000 F-350 Crew Cab Longbed DRW truck? Looking for helper springs or even better some air bags that will work with this. | For air bags that are compatible with...

NEED TO TALK TO ABOUT RV HITCH | Hello there, If you can tell me what you would like to do with the hitch I can get you a specific answer and solution for your needs. If you are specifically looking at the Adjustable Width Trailer Hitch Receiver...

fifth wheel plug my factory plug is square the pic of your product is round 2000 ford super duty will it fit | A 5th wheel wiring harness with a round plug won't fit the square plug of your 2000 Ford F-350 Super Duty but we do have one that...

Can my spare tire stay in its original place under the truck if I change to this hitch. Its a 2000 f 350 super duty with a truck bed . | The Curt Trailer Hitch Receiver # C15810 that is custom fit for your 2000 Ford F-350 Super Duty will allow...

Looking to get a motor kit for my Happijac 4800 and 4160 jacks. I think its part number 182522. | We have just what you're looking for. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is compatible...

I have a 2000 f350 7.3 powerstroke dually my question is what would you recommend a gooseneck hitch or a 5th wheel hitch? I want to have the rail below the bed and not sure if my truck has the ability to have the puck system. | Picking between...