Thule Wingbag Evo Roof Rack that Fits 2010 Ford Explorer and 2013 Subarou XV Crosstrek
I have a 2010 Ford Explorer and a 2013 Subaru XV Crosstrek both have factory installed roof rails, I and am interested in the Thule Wingbar EVO roof rack with the clamp on feet to mount a Thule Dock Grip kayak rack. Are the Wingbar EVO kits...
Oil Cooler Recommendations for a 2013 Ford Explorer with a 3.5 Liter
Which oil coolers will fit on a 2013 Ford Explorer with a 3.5 liter engine? | I did some checking and it looks like the oil filter threads on your 2013 Ford Explorer with a 3.5 liter engine are M22x1.5 mm, so you are going to need an oil cooler...
Will Trimax Trailer Wheel Chock and Lock TMX75FR Fit 205/75-15 Tire
In the video he mentions a tire size of 205 75r 15 , but that size is not listed , so will this work on 205 75r 15 ?? | Hey there Robert, thanks for the question and even though it is not listed, a 205/75-15 tire is absolutely compatible with...
Recommended Bike Rack With a Ramp for E-Bike
My husband passed away in January. We always loaded our bikes as a team. I am not able to load my bike by myself. I have a 2-bike Thule rack, but I need a 1-bike rack that has a lift or ramp that will assist me in getting my heavy Giant brand...
Will the Curt Class lll Trailer Hitch for 2010 Ford Explorer Fit with Factory Hitch and Spare Tire
2010 Ford Explorer Mine is a four door model with the large spare tire and class 2 hitch all ready made on the frame will the Curt part # 13112 fit on corectly with the full size spare tire. and if not what hitch will ? | Yes, the Curt Class...
Does the Engine Need to Be On So Brakes Work Properly While Flat Towing 2010 Ford Explorer
Since the car has power brakes, does the motor have to be running when towing? | No, the vehicle motor will not need to be running while towing the vehicle in order for the brakes to work. When checking the owners manual for an Explorer, I...
Roof Rack Confirmed to Fit a 2010 Ford Explorer with Raised Factory Side Rails
I currently have aero blades 7501b but I do not think they are correct, they do not even come close to the roof edge. Which racks will work for me please? The configuration page isn’t helping. I can take the factory rails off if necessary. |...
Wiring Needed For Tekonsha Prodigy P3 To Be Used In Multiple Ford Vehicles
I just purchased the Tekonsha Prodigy P3 Trailer Brake Controller. I want to be able to use it on the following vehicles: 2005 Ford F-150 Crew Cab 4WD with tow package installed 2010 Ford E-450 31foot Jayco Greyhawk Motorhome this is a 2011...
Replacement Installation Kit for Aries Grille Guard AA3059 for Ford Explorer
Is this kit compatible with Aries Grille Guard model 3059 black or 3059-2 polished? | The Aries Grille Guard # AA3059 does fit your 2010 Ford Explorer and the appropriate Replacement Bracket and Hardware Kit is part # AABRKT-3059. Aries Replacement...
Ladder Needed That is 105" Long
My ladder now is about 105 inches long, do have any that long for a George of 2000. | The longest ladder that we have is the 99-1/2" ladder from Stromberg Carlson. This comes in Silver # LA-401 as well as Black # LA-401BA and has a customizable...
Can the Rear Hatch of a 2010 Ford Explorer Open with the Reese Cargo Carrier # 63155 is Installed
Can you tell me if this cargo rack is compatible with a 2010 Ford Explorer. If so, does it allow room to open the lift gate while installed? If not, can you recommend something that does fit the above criteria? | By taking a few measurements,...
Best Towing Mirror for a 2010 Ford Explorer XLT
What mirror is the best fix for a 2010 Ford explorer xlt | I would be happy to find some towing mirrors that clip onto your factory mirrors but if you are trying to replace your stock mirrors we do not offer any for your 2010 Ford Explorer XLT....
Does the Hollywood Racks Sport Rider SE Tilt Downward for Easy Loading
We are considering the Hollywood Sport Rider SE for transporting a RadWagon electric cargo bike. Because my wife has trouble lifting heavy weights is it possible to tilt this unit down to reduce the height for loading and then tilt and lock...
Which Roof Mount Ski Racks Fit a 2010 Ford Explorer Factory Roof Rack and Can Hold Fishing Poles
Which Roof Mount Ski and Snowboard Racks Fit a 2010 Ford Explorer with Factory Crossbars, and can they be used to transport fishing rods? | There are several ski/snowboard carriers that will fit the factory roof rack on your 2010 Ford Explorer. From...
Hopkins Tailgate Lift Assist Compatibility with 2013 Dodge Ram
I just want to double check the easy lift will work on a 2013 Dodge Ram 1500 crew cab Laramie with the backup camera in the tailgate handle and power lock? Thanks | We do have a tailgate assist options for your 2013 Dodge Ram 1500 Laramie, however,...
What Wires of 4-Way to 7-Way Adapter Needs to be Connected to Use Curt Echo Mobile
My RV has a 4 post to 7 post adapter the blue black and yellow are not connected to anything will the Curt echo Bluetooth brake controller still work for me ? | You'll need to connect the black wire of your 4-way to 7-way adapter to the positive...
Noise-Reducing Wind Fairing For Thule Square Bar Roof Rack on 2010 Ford Explorer
I have a Thule 450 rack with square cross bars on my 2010 Ford Explorer. I’d like to get a wind fairing to cut down on the noise from the rack. Do you know what size or kit would work? Thanks | On your 2010 Ford Explorer Thule specifies 50-inch...
Where Is Factory Brake Controller Plug Located On 2010 Ford Explorer Sport Trac
Where do I find the wiring to connect my control unit to? I have a factory installed type III/IV towing package on my truck. Will it be located under the dash? How do I recognize it....special color or configuration? 2010 ford explorer...
No Power To Brake Controller With Plug-In Harness On a 2010 Ford Explorer
Hi, I want to install my tekonsha prodigy brake controller to my ford explorer. I have the correct wire harness that attaches the controller to the ford factory harness, however, there is no power. Thank you for your help. | The fuse for the...
How to Order Replacement Hardware for Draw Tite Hitch 75437
hello, looking for a Drawtite bolt kit # 75437F. Do you sell these ? | To order replacement hardware for the Draw Tite hitch part # 75437 what you need is the part # RHK. On the product page of this part number you'll enter the part # 75437...
Why Must the Curt Class II Drawbar # C45014 be Used in the Rise Position Only
Why must the ball mount, #C45014, be used only in the rise position and not in the drop position? | I spoke with my contact at Curt and he said the Class II Drawbar, # C45014, has not been tested for use in the drop position. They only test...
Fit of Curt 20x48 Cargo Carrier # C18145 on 2010 Ford Explorer
Will this hitch carrier #c18145 work well on a 2010 Ford Explorer? | To determine if the Curt 20x48 Cargo Carrier will work with your Explorer, you will need determine if there is enough clearance at the rear of the vehicle. You will need to...
Why Do Hitches have Higher Ratings when Used with Weight Distribution Systems
The specs have different rating when using weight distribution. What does that mean? Is weight distribution automatic with this hitch? | Weight distribution systems are designed to help distribute the tongue weight of the trailer to the front...
Availability of 2-Inch Ball Mount with 6-Inches of Drop and 7500-lb Capacity
I need a ball mount, six inch , at least 700lbs tongue weight, at least 7500lbs towing weight, 2inch ball. Would prefer a ball mount that has the ball pre-torqued onto the ball mount if at all possible. Can you make some recommendations for...
Filter Your Search
Contact and Help