Will Curt Spyder Gooseneck Trailer Hitch # 16085 Fit Reese Adapter # RP30154
will this gooseneck adapter fit the reese rp30154 rails that mount inside the factory set up? | Yes, the Curt Spyder Gooseneck Trailer Hitch # 16085 is designed to fit industry-standard 5th wheel rails. Since the Reese 5th Wheel Rail Adapter...
No Power To Brake Controller With Plug-In Harness On a 2010 Ford Explorer
Hi, I want to install my tekonsha prodigy brake controller to my ford explorer. I have the correct wire harness that attaches the controller to the ford factory harness, however, there is no power. Thank you for your help. | The fuse for the...
CIPA Towing Mirrors That Fit a 2010 Ford Explorer
Do you sell a CIPA towing mirror that will fit a 2010 Ford Explorer? | We do carry CIPA towing mirrors that will fit a 2010 Ford Explorer. There are three different mount styles available - clamp-on, clip-on, and door mount. The clamp-on style...
Best Towing Mirror for a 2010 Ford Explorer XLT
What mirror is the best fix for a 2010 Ford explorer xlt | I would be happy to find some towing mirrors that clip onto your factory mirrors but if you are trying to replace your stock mirrors we do not offer any for your 2010 Ford Explorer XLT....
Towing Mirrors Recommended for a 2010 Ford Explorer Sport Trac Adrenalin
Hi, I have a Ford Explorer Sport Trac 2010 Adrenaline and Im searching for a custom fit towing mirror. Do you have any model that can match for that pick-up? Thanks a lot! | We have some towing mirrors that will likely fity your 2010 Ford...
Tow Mirror Recommendation for 2010 Ford Explorer Sport Trac
Will they fit a 2010 ford explorer sport trac? I tow a 17 ft single axle hybrid camper . | The most popular towing mirror option for your 2010 Ford Explorer Sport Trac is the # CM11980, which clips onto stock mirrors that have a lip or gap between...
Where Is Factory Brake Controller Plug Located On 2010 Ford Explorer Sport Trac
Where do I find the wiring to connect my control unit to? I have a factory installed type III/IV towing package on my truck. Will it be located under the dash? How do I recognize it....special color or configuration? 2010 ford explorer...
Could 2010 Ford Focus Tow Jet Ski Trailer with Curt Hitch
Will this be suitable to pull a jet ski as long as it doesnt exceed weight limit? | As long as the towing capacities of your 2010 Ford Focus (check owners manual) and the Curt hitch part # C11319 don't get exceeded you could tow a jet ski trailer. This...
Would Short in Trailer Wiring Damage Vehicle Wiring in 2010 Ford Focus
it appears that it used existing taillight harnesses and is not separately fused. In the event a trailer short circuits it will blow the taillight fuse, and The vehicle brake lights will not work? | Since the Curt trailer wiring harness part...
Recommended Bike Carrier To Use Between RV And Towed Vehicle
I will be using Blue Ox Avail BX 7420 tow bar and BX 2198 baseplate to tow Ford Explorer Sport Trac behind a 2007 Fleetwood Expedition Is there a recommended 2 position bike rack that can fit between? | In order to be able to carry bikes between...
Will Husky Liners WeatherBeater Custom Mats # HL98311 Fit Security Points For 2010 Ford Focus
Have a 2010 ford focus se with 2 security points on driver side and want to know if this mat is made for that many security points. | The Husky Liners WeatherBeater Custom Auto Floor Liners # HL98311 will fit properly within your 2010 Ford Focus....
Oil Cooler Recommendations for a 2013 Ford Explorer with a 3.5 Liter
Which oil coolers will fit on a 2013 Ford Explorer with a 3.5 liter engine? | I did some checking and it looks like the oil filter threads on your 2013 Ford Explorer with a 3.5 liter engine are M22x1.5 mm, so you are going to need an oil cooler...
Installation Instructions for the Blue Ox Base Plate Kit # BX2198 for 2010 Ford Explorer Sport Trac
i have 2010 ford explorer sport tract need to look at video on how to install blue base plate bx 2198 | We do have the install instructions (linked to this answer page) for you to review, but unfortunately we have not yet had the opportunity...
Ladder Needed That is 105" Long
My ladder now is about 105 inches long, do have any that long for a George of 2000. | The longest ladder that we have is the 99-1/2" ladder from Stromberg Carlson. This comes in Silver # LA-401 as well as Black # LA-401BA and has a customizable...
2010 Ford Explorer Sport Trac Trailer Hitch Options
I have a 2010 ford Explorer Sport Trac with a factory installed Class II trailer hitch system. The vehicle has a 4.6L V8 engine with a towing capacity of 7100 lbs so I would like to upgrade to a Class III or Class IV hitch to accommodate this....
Why Must the Curt Class II Drawbar # C45014 be Used in the Rise Position Only
Why must the ball mount, #C45014, be used only in the rise position and not in the drop position? | I spoke with my contact at Curt and he said the Class II Drawbar, # C45014, has not been tested for use in the drop position. They only test...
Will the Draw-Tite Sportframe # 24805 Fit a 2010 Ford Focus SES
Will this work on a 2010 Ford Focus SES? | Yes, the Draw-Tite Sportframe # 24805 is a confirmed fit for all models of the 2010 Ford Focus. This is a Class I trailer hitch receiver with a max Tongue Weight of 200 lbs and a max Gross Trailer Weight...
Why Do Hitches have Higher Ratings when Used with Weight Distribution Systems
The specs have different rating when using weight distribution. What does that mean? Is weight distribution automatic with this hitch? | Weight distribution systems are designed to help distribute the tongue weight of the trailer to the front...
Parts Needed to Flat Tow a 2010 Ford Explorer Sport Trac 4x4 Behind a Motor Home
I need tow bar base plate wireing ad safety cables | We have all of the parts you are looking for to flat tow your 2010 Ford Explorer Sport Trac 4x4, however, I did some research on your vehicle and it looks like you may need a Neutral Tow Kit...
Replacement Drop Leg Needed for a RAM 2000 Series A-Frame Jack
I just purchased a camper, and the dealer did not have a footplate that would fit because of the indent on the stand itself. Can you tell me if it will fit this particular jack? It seems to have the same indent, Im just not sure if it will...
Recommended Weight Distribution Hitch Compatible with 2010 Ford Explorer w/ Electronic Sway Control
Hi - I have a 2010 Ford Explorer 4.6 v8, with Sway Control option. GVWR: 6280 GCWR: 12000 Curb: 4628 Payload: 1652 I am towing a 2015 Aspen Trail Mini1500BH trailer. GVWR: 3800 Dry: 2975 Cargo: 825 Hitch: 357 Trying to determine the expected...
Roof Rack and Kayak Carrier Recommendation for a 2010 Ford Focus SES with Sun Roof
I have a Ford Focus 2010 SES with a sunmoon roof and it has the black channels built in the roof standard from the factory. I want to put a Kayak on the roof and I need a recommendation for what whould fit in the channel as a rack and then what...
Is Trimming Required for Installation of the # 31545 Front Mount Hitch on a 2010 Ford Explorer XLT
With #31545 Curt front mount trailer hitch receiver will I have to trim any bumper parts on my 2010 explorer xlt ? Thanks | There is no drilling, cutting or modifying of any of the parts on your 2010 Ford Explorer XLT for installation of the...
Roadmaster Falcon 2 Tow Bar To Roadmaster EZ Base Plate Kit
I have a Falcon 2 tow bar W articulated ends w/ a large pin w/ a clip. The base plate has flat ends w/ holes. Your quick disconnects dont have a U shaped connection to place the end and pin thru. 2010 Focus | It sounds to me like you are trying...
Filter Your Search
Contact and Help