How To Manually Adjust Self Adjusting Brakes
How do you manually adjust self-adjusting brakes? Do you have a video on that procedure? | The Self-Adjusting Brake Assemblies like # AKEBRK-7-SA will still have a manual adjuster to allow you to relieve the brake shoe pressure. You need to...
Is Drilling Required to Install JT's Strongarm Kit # LC191023
Is drilling into the frame required for the installation of the JTs Strong Arm system? | Yes, there will be drilling into the frame with the included self tapping screws to install the JT's Strongarm kit part # LC191023 that you referenced. |
Reese Goose Box Pin Box Replacement for Keystone Avalanche 5th Wheel Trailer
I have a keystone avalanche fifth wheel with a lippert box item nmber 261039 mfg 6/16/2011. Which reese goosebox adapter wiill fit this trailer and maintain the warranty? | The Reese Goose Box Pin Box replacement will not void the manufacturer's...
How To Use A Swivel Wheel Trailer on a 5th Wheel Trailer
I have a 5th wheel that I want to attach a cargo carrier to.i would like to attach something similar to a swivel whee for a gold cartl,do you have any suggestions Thanks is advance | I do have everything you need to use a swivel wheel trailer...
Landing Gear Gear Box and Motor Replacement for 2011 Keystone Cougar Fifth Wheel
What parts/numbers to replace the landing gear motor and gear box on a 2011 Keystone Cougar | Keystone RVs use landing gear from Lippert so the correct gearbox and motor would be part # LG-179015 and then for a motor you'd want # LC142178. |
Is there an Angled Mounting Bracket for a Lippert Ground Control 3.0 Leveling System LC421484?
I have seen on Brinkley 5th wheel RV, that the Ground control 3.0 display panel is mounted in a plastic box that looks to be angled maybe 45 degrees, so that when you open the compartment door the face plate is more pointed towards the door....
Recommended Bike Rack For Heavy Cruiser Bikes on Class I Hitch Receiver on 2020 Hyundai Venue
Im confused. I just had a trailer hitch installed on my 2020 Hyundai Venue. You offer the same one on this website that I had installed. Its a 1 1/4inch Class I. Ive FINALLY found a bike rack I want...so difficult....and the info says Class...
Can Furrion Vision S Backup Camera FOS43TASF be Installed on 2017 Keystone Avalanche
I just bought a used 2017 Keystone Avalanche 300RE. Im thinking of putting a backup camera on this. I dont know if its prewired or not as a lot of the information stickers and what not were removed I assume by previous owner. The unit was traded...
Locating Replacement Hubs and Brake Assemblies for 2014 Keystone Cougar Trailer
I have a 2014 Keystone Cougar High Country, Model 333MKS. Which hub assembly is the correct one for my 5th wheel for the left rear wheel? I have had the bearing fail me 3 times in the past 2 years. I had to replace the hubthe first time, the...
Troubleshooting Landing Gear Retracting Intermittently on 2010 Keystone Avalanche 5th Wheel
My 2010 Keystone avalanche landing gear will go up and then stop completely. After I wait a few seconds it will start working again but then stop. I replace the motor and it still doing the same thing | If your landing gear is acting up like...
What Tools are Needed to Install Curt Hitch # C57CR
What tools are needed for the installation? | In the attached install instructions for the Curt hitch part # C57CR that you referenced a list of the needed tools is listed and you'll need a ratchet, torque wrench, 3/4 inch drive socket, slot...
Why Do The King Pin Plate Pivot Bolts On The Rota-Flex Pin Box Keep Coming Loose
I have a 2022 keystone avalanche with the lippert roto flex pin box. The two bolts that hold the cushion keep coming loose. I keep re tightening the bolts to 90-100 ft lbs. Any suggestions | The Trailair Rota-Flex 5th Wheel Pin Box # LC328330...
Locking Hitch Pin for Swagman Bike Rack
I placed my order for this hitch along with the Swagman XC2 Bike Rack for 2 bikes - 1-1/4inch and 2inch Hitches - Frame Mount Do I need bolt feed wires for the hitch? What is the part number for a locking hitch pin that fits? | The Curt Trailer...
TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear
We recently purchased a fifth wheel camper. I have mobility issues and need steps with a low rise. We have a keystone Avalanche | Most RV steps are going to have a drop/rise of about 8". The TorkLift GlowStep Revolution Scissor Steps w/ Landing...
Window Gasket Solution for 2021 Keystone Avalanche Slide Out
Hi, I am looking for a window gasket for the living room slide out exterior window on a 2021 keystone avalanche 338gk. Can you assist Thanks | Hey Anthony, so we don't have any window gaskets but you could use butyl tape like the part # 344270341410-1....
Recommended Tire Cover for 235/55R16 Tires on a 2019 Keystone Avalanche 383FL
My fifth wheel tires are 235/55/16 what size covers do I need? The RV is a 2019 Avalanche 383F | I recommend going with Adco Tyre Gard covers that fit dual axles because they have proven to be some of the best tire covers out there and the dual...
How To Find the Correct Landing Gear Legs for a 2012 Keystone Avalanche
replacement landing gear recommendation for a 2012 keystone avalanche 5th wheel | In order to find the correct replacement landing gear legs for a fifth wheel trailer I would need you to take two quick measurements of your existing landing gear...
Which is Better Hitch for 2022 Hyundai Venue Curt or Draw Tite
It looks like you offer two different hitches for the 2022 Hyundai Venue. The Draw Tite DT24MR and the Curt C57CR Any preference between the two, or just flip a coin? | Both the Draw Tite # DT24MR and the Curt # C57CR are great hitches for...
Trailer Hitch Receiver and Wiring Recommendation For a 2024 Hyundai Venue
Is there a hitch for the new 2024 Hyundai Venue? | Yes, we have the Draw-Tite Trailer Hitch Receiver # DT24MR which I recommend for your 2024 Hyundai Venue. This is custom fit so you will not need to drill or weld any components of your receiver...
Need Backup Solenoid For Hydraulic Leveling And Slide-Outs For 2017 Keystone Avalanche 5th Wheel
Hi, When ping off our trailer for warranty work, I hit the button to pull in the hydraulic slides. Well the slides did not come in but the landing gear went down. We were told to leave it there and they would take care of it. They submitted...
5th Airborne Pin Box Recommendation for Trailer with 15.5k GVWR and Lippert 1621 Pin Box
Can you tell me the difference between the 5th Airborne 16k VS 21k 1621 hitches? We are planning to buy a new 5th wheel at 15,500 GVW and wondering if there is one hitch better for the application. Is there a negative affect to running the...
Will the Valterra Waste Valve Body w/ Flexible Cable # TC372 Fit a 2014 Keystone Avalanche 361TG
Waste valve kit TC372. Will this fit a 2014 Keystone Avalanche 361tg? | The Valterra Waste Valve Body w/ Flexible Cable # TC372 has a 3" diameter passage that is compatible with standard 3" sewage lines on RVs like your 2014 Keystone Avalanche...
Replacement Tire Cradles for a Swagman G10 Bike Rack
How wide of a tire will fit, 4 inch? I have a Swagman G10 Bike Rack. | The Replacement Wheel Holder for Swagman G10 Bike Rack item # G1025 you mentioned, is designed to work with wheels up to 3" wide and fits the right side. If you are needing...
Landing Gear With Dual Motors For Keystone 5th Wheel
I have a 2015 keystone avalanche the original landing gear Ive been told that I can change out the following leg with a lead leg and add a motor in a kit so that I could operate the legs independently and can you tell me what part numbers I...
Filter Your Search
Contact and Help