Trailer Hitch for 1976 Chevy C/K Series Stepside With Short Bed
HI, I have a 1976 Chevy k10 short bed stepside. I need a hitch that does not interfere with the spare tire mounted under the truck. Thanks | The trailer hitch that fits your 1976 Chevy K10 short bed stepside, and will not interfere with your...
Custom Snow Plow Mount for 1976 Ford F-250
Do you have a custom plow mount that will fit a 1976 Ford F-250 4x4? I have looked elsewhere and and have had no luck. | You're in luck because there are custom mounting brackets for a snow plow that fit your 1976 Ford F-250 (so long as it is...
Front Hitch For A 1976 International Scout II
when I enter vehicle infor #C31083 comes up for front hitch set up for 1976 IH Scout. Does it indeed fit our vehicle and what class is this hitch? | The only hitch I have for you is going to be a rear class III hitch # 13580. The # C31083 front...
How Can You Tell Which Size Eye Bolt Fits Into Yakima HD Crossbars?
It seems that the anima eye bolts fit most t slot rack and bars that said the $28 I have aice for 2 is a bit steep - they also are steel and not stainless - I have seen other eye bolts for T slots online - is there a specific siz needed for...
Overall Length of the Aries Round Nerf Bars # AA204040-2
What is length front to back ? | From front to back the Aries steps part # AA204040-2 measures 66-1/2 inches. |
Weight Capacity of Redline HP344G Greasable Hinges
I am building a tilt up trailer ramp/gate that could potentially haul my 4500lb truck would 2 of these hinges work? The gate will be 88inx48in all 2in tube as well as angle | According to Redline, the # HP344G hinges don't carry a weight rating,...
Specs for the Air Lift Ride Control Air Helper Springs # AL59561
Can you provide the following specs on this air bag? Inflation port size: Compressed height: Extended height: Ride height range: Maximum diameter: Maximum PSI: | The Air Lift Ride Control Air Helper Springs # AL59561 has the following specs: Inflation...
Tire Minder TM56FR Display Battery Life
How long does the monitor battery last on one charge. Need to mount it where there is no power outlet handy. | According to the owners manual the item # TM56FR monitor has a built-in Lithium-Ion rechargeable battery which under normal use will...
Replacement Roof Vent Lid Recommendation for 1993 Lance Squire 4000
Trying to get a vent lid for our 1993 Lance Squire 4000 9foot 4. Its looks to be the 14x14 but the hinge pins everyone sells opposite of what I have. The hinges on mine are small, large, large center small, large. Most I see are for four...
Available Solution to Add a Front Mounted Hitch to a 1976 GMC Motorhome
I need a 2 receiver that will fit the FRONT of my 1976 GMC Motorhome. Suggestions? Thanks | I may have a solution for you, but there is not a custom fit hitch for this vehicle so it may require some fabrication. With that said, you may be...
Replacement Rear Bumper Options For A 1976 Ford F-250
Looking for rear bumper mounting kit for a 1976 Ford f250 4x4 has a narrow frame 34 | Yes, we have the following style options available for your 1976 Ford F-250 with brackets compatible with your 34" frame: Westin Fey Surestep Deluxe XLT Rear...
Installation of Draw-Tite Hitch Receiver # 37130 on 1976 Ford F-150
how much is do you torque the bolts on hitch #37130 | I've attached the installation instructions for the Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2" # 37130. You will first torque the 1/2" nuts to 70 ft•lbs. Then torque the...
Availability Of Trailer Hitch Receiver For 1973 Jeep CJ-5 V8
Why wont this fit a 73 CJ-5 V-8? other hitches go for all cj5 no matter what year they are. Thanks, Steve | The reason the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13412 you were looking at will not fit a 1973 Jeep CJ-5 is...
Will The Demco Stay-IN-Play Duo Flat Tow Brake System Work On Vehicles Without Power Brakes?
Hi, does the towed vehicle need power brakes for the Demco stay in play brake system to work? | While the Demco Stay-IN-Play Duo Flat Tow Brake System # SM99251 does have the ability to work with vacuum boosted brakes it will still work on other...
What is the Largest Wheel Strap for the Demco Kar Kaddy SS Tow Dolly Part 9713045
1976 Jeep CJ7 with 31X10.5X15 Cooper Discoverer tires. The Dolly is a Kar Kaddy SS. What wheel strap do you recommend. Will DM03528-93 work? Thanks | Yes, the Replacement 3-Point Large Wheel Tie-Down Strap part # DM03528-93 will allow you to...
Recommended Trailer Hitch Receiver For 1963 Ford Econoline Van
Does anyone make any size hitch for a 63 Ford econoline van? | I have another option for you, but at this time there is not a custom fit trailer hitch receiver offered for your 1963 Ford Econoline Van, Instead you will need to a universal trailer...
Hitch Recommendation for a 1976 Dodge M-class Motor Home
Do you have a trailer hitch for a 1976 Dodge M-class motor home? Sportsman American Clipper. | For your 1976 Dodge M-class motor home we don't have any custom fit hitches available, but we do have a multi-fit hitch that should work as long as...
Parts Need to Flat Tow a 1976 Toyota FJ-40 Behind a Motor Home
Looking to determine what i need or what would be compatible to install a towbar on the front of my 1976 Totota Landcruiser with a stock bumber. Is there a mounting bracket that i need to mount to the frame rails which run the length of the...
Parts Needed to Tow a Gooseneck Trailer with a 1976 Ford F-350
What gooseneck hitch would fit my 1976 ford f350? Would prefer a turnover ball. | I do have a solution for you to tow a gooseneck trailer with your 1976 Ford F-350 but unfortunately there are no gooseneck hitch fits for your pickup. Instead...
Brake Controller Recommendation for a 1976 Dodge RM300
My question is, what type of brake controller do I need for a 1976 DODGE RM300 RV CHASIS? Since the vehicle isnt setup like a newer plug an play vehicle, is there a certain type of controller I need. Thanks for your time! | For a brake controller...
What Hitch for 1976 Chevy Pickup with 8ft. Bed and What Installation Is Involved
Hi: Is this a direct bolt on with no modifications to my truck? Will I have to drill holes in my frame? Will I have to remove the bed to put it on? Will it clear where my spare tire is I have the standard factory spare mounting which is between...
Upper Door Recommendations for the Bestop 2-Piece Soft Doors for Ford Bronco 1966-1977 B5177201
Hello im looking for just the upper doors for part number B5177201. Or even just the passenger side. | I spoke with my contact at Bestop and for the passenger side upper door of the part # B5177201 you would want # B404-52P and for the driver...
Measurements of etrailer Hitch for 1976 K10 Pickup
What are the dimension of this hitch? I am looking for top of the mounting plate to the top of the hitch sleeve for example the Curt 13028 is 4.5-5inch depending on where you measure on the 2inch shaft? I am also looking for the length from...
Is There a Trailer Hitch Receiver Available For a 1976 Lincoln Mark IV?
I am looking for receiver only for under rear bumper of my 1976 Lincoln Mark IV | While we currently do not carry a custom fit receiver for your 1976 Lincoln Mark IV you may be able to have one fabricated using our Weld-On Receiver # E17. You...
Filter Your Search
Contact and Help